Lamona LAM1625 Troubleshooting guide

User & Installation Guide
LAM1625
5 Zone Ceramic
Touch Control Hob

02_
LAMONA Appliances
Dear Customer,
Congratulations on your choice of hob which has been designed to give you excellent service.
The user manual will help you use your product quickly and safely.
Please read this user manual before installing and using the hob.
Always follow the safety instructions.
Keep this user manual within easy reach for future reference.
Please read any other documents supplied with the product.
Remember that this user manual may also applicable for other models and there maybe some minor
differences between the illustrations and your product.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful tips about usage.
Warning for possible hazards to health and property.
Warning possibility of electric shock.
European Directives
As a producer and a supplier of cooking appliances we are committed to the protection of the environment
and are in the compliance with the WEEE directive. All our electric products are labelled accordingly with
the crossed out wheeled bin symbol. This indicates, for disposal purposes at end of life, that these products
must be taken to a recognised collection points, such as local authority sites/local recycling centres
This appliance Complies with European Community Directives (CE) for household and similar electrical
appliances and Gas appliances where applicable.
This appliance conforms to European Directive 2009/125/EC regarding Eco design requirements for
energy-related products
This product’s packaging material is recyclable. Help recycle it and protect the
environment by dropping it off in the municipal receptacles provided for this purpose.
Your product also contains a great amount of recyclable material. It is marked with this
label to indicate the used appliances that should not be mixed with other waste. This
way, the appliance recycling organised by your manufacturer will be done under the
best possible conditions, in compliance with European Directive 2012/19/EC on Waste
Electrical and Electronic Equipment. Contact your town hall or your retailer for the used
appliance collection points closest to your home. We thank you doing your part to protect
the environment.

_ 03
User manual LAM1625
Index
Index
01 - Before Using the hob 04
02 - Safety 04
General 05
Fire safety advice 06
Fire Safety 06
,IDSDQFDWFKHVÀUH
Deep fat frying 06
If you have an Electrical Fire 06
03 - Using your hob 08
Touch controls 08
Controls layout 08
Initial setup 08
Functions 09
Timed cooking 10
Safety shut off 10
04 - Cleaning and Maintenance 11
Ceramic hob glass 11
05 - Trouble Shooting 12
06 - Installation 13
General Information 13
Positioning 13
Connect to the electricity supply 16
Technical Data 17
07 - Your guarantee 18

04_
LAMONA Appliances
Before Using the hob
0DNHVXUHWKDW\RXKDYHUHPRYHGDOOSDFNDJLQJZUDSSLQJVVWLFNHUVDQGÀOPVIURPWKHKREVXUIDFH
,WLVUHFRPPHQGHGWKDW\RXFOHDQDQGZDVKWKHKREVXUIDFHEHIRUHXVLQJIRUWKHÀUVWWLPH
Apply a thin coat of ceramic hob cleaner to the hob to help maintain and protect it.
01 - Before using the hob
WARNING! - The
appliance and its
accessible parts become
hot during use. Care should
be taken to avoid touching
heating elements. Children
less than 8 years of age
shall be kept away unless
continously supervised.This
appliance can be used by
children aged from 8 years
and above and persons
with reduced physical
sensory or mental
capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning the use of the
appliance in a safe way and
understand the hazards
involved. Children shall not
play with the appliance.
Cleaning and user
maintenance shall not be
made by children without
supervision.
WARNING! -
Unattended cooking on a
hob with fat or oil can be
dangerous and may result
in ¿re
NEVER try to extinguish a
¿re with waterbut switch
off the appliance and then
coYer the Àame with a lid
or damp cloth
WARNING! - Metallic
obMects such as kniYes
forksspoons and lids
02 - Safety

_ 05
User manual LAM1625
should not be placed on
the hob surface since they
can get hot
WARNING! -Danger
of ¿redo not store items
on the cooking surface
WARNING! -Never
leave any cook zone on
without a pan covering it.
7KLVFDXVHVDÀUHKD]DUG
WARNING! -If the
surface is crackedbroken
or shatteredswitch off
the appliance to avoid the
possibility of electric shock
and call for a service
engineer¶s visit
WARNING! -
Servicing should be
carried out only by
authorised personnel
WARNING! -
Do not spray aerosols
in the vicinity of this
appliance while it is in
operation
WARNING! - Do not
store or use Àammable
liquids or items in the
vicinity of this appliance
WARNING! -
Do not modify this
appliance
General
Always ensure that pan bases are dry, stable
DQGÁDWEHIRUHXVLQJWKHPRQWKHKRE
Always match the size of pan to the cook
zone – do not use large pans on small zones
or vice versa.
Always position pans over the centre of the
cook zone, and turn the handles to a safe posi-
tion so they cannot be knocked or grabbed.
Always lift pans onto and off the hob, rather
than sliding them across the surface, to avoid
marks and scratches.
This appliance should only be used for normal
domestic cooking of food.
Never use the hob for any other purpose than
cooking food.
Plastic cooking utensils can melt if they come
into contact with a warm hob. Never leave
them close to, or on top of the hob.
Safety

06_
LAMONA Appliances
Never use the hob surface as a chopping
board or food preparation area, as this may
lead to it becoming damaged.
Never leave aluminium foil on the hob top,
LWUHÁHFWVKHDWEDFNLQWRWKHHOHPHQWZKLFK
leads to damage.
Never heat up a sealed tin of food on the hob,
as it may explode.
Never leave pans overhanging the edge of the
hob. The surface of the hob is smooth. If pans
are knocked they may move on the hob top.
Fire safety advice
0RVWNLWFKHQÀUHVRFFXUZKHQSHRSOHDUHGLVWUDFWHG
or leave things unattended, so remember:
If you’re called away from the hob - by the phone or
someone at the door, either take pans off the heat,
or switch off your hob.
Don’t let yourself be distracted while cooking.
,I\RXGRKDYHDÀUHLQWKHNLWFKHQGRQ·WWDNHDQ\
risks - get everyone out of your home and call the
Fire Service
,IDSDQFDWFKHVÀUH
Do not move it as it’s likely to be extremely hot.
Turn off the heat if it’s safe to do so, but never
lean over a pan to reach the controls.
8VHÀUHEODQNHWRUDGDPSWHDWRZHOWRFRYHU
the pan.
,I\RXKDYHSXWWKHÀUHRXWOHDYHWKHSDQWR
cool completely.
This hob is not intended to be
opertated by means of a external timer
or seperate remote control system.
Deep-fat frying presents more
dangers in your kitchen
1HYHUÀOODSDQRURWKHUGHHSIDWIU\HUPRUH
than one-third full of oil.
'RQRWXVHDÀUHH[WLQJXLVKHURQDSDQRI
burning oil - the force of the extinguisher can
VSUHDGWKHÀUHDQGFUHDWHDÀUHEDOO
,I\RXKDYHDQHOHFWULFDOÀUHLQWKH
NLWFKHQ
Pull the plug out, or switch off the power at the
IXVHER[WKLVPD\EHHQRXJKWRVWRSWKHÀUH
immediately
6PRWKHUWKHÀUHZLWKDÀUHEODQNHWRUXVHD
dry powder or carbon dioxide extinguisher
Remember: never use water on an electrical or
FRRNLQJRLOÀUH
Avoiding damage to the appliance
The ceramic glass of the hob can be damaged by
objects falling onto it. Be especially careful with
heavy jars of food being stored in cupboards above
the hob, we recommend storing them away from the
hob area.
The edge of the glass can be damaged by being
knocked by cookware. Cookware made of cast
iron, cast aluminium or with damaged bottoms
can scratch the ceramic glass if pushed across the
surface.
Objects that melt and things that boil over can burn
onto the ceramic glass and should be removed as
soon as possible. To avoid damage to cookware and
the ceramic glass, do not allow sauce pans or frying
pans to boil dry.
Do not use the cooking zones with empty cookware
or without cookware in place.
Safety

_ 07
User manual LAM1625
Touch Controls
The touch controls for your hob have been designed
WRSURYLGH\RXZLWKÀQJHUWLSFRQWURORI\RXUKRE
providing accurate and repeatable power settings
for cooking and an easy clean surface that can be
easily wiped over. When a cook zone is activated the
power setting is displayed for each zone individually,
Controls layout
Initial set up
Before switching on the power supply to the
appliance, switch off any bright lights (such as
cooker hood) and ensure the appliance is not in
direct sunlight.
This is to enable the electronic controls to calibrate
its sensitivity against natural ambient lighting
(approx 30 seconds).
Failure to observe the above will result in the hob
not functioning correctly, (Display showing “FL”).
To rectify remove all strong lighting sources and
re-apply power.
The hob should complete the calibration procedure
satisfactorily and lighting such as cooker hoods can
be used normally.
03 - Using the hob - electric ceramic
7RXFKDWRQHSRLQWWR´MXPSµWRDVSHFLÀFVHWWLQJRUVOLGH\RXUÀQJHUDORQJWKHVHOHFWRU
To select a setting on the selector
ÀJ

08_
LAMONA Appliances
Using the hob
Functions
Lock
A Red Led indicates when the key lock is
active, to deactivate/activate, touch the Key
Lock key for 1 second.
The key lock is deactivated when the Red LED
switches off.
If any of the cook zones are ON, the key lock
function locks all the keys except the ON/OFF
key.
If the cook zones are OFF, the key lock function
locks all the keys, including the ON/OFF key.
The Key Lock is automatically activated every
time the electricity supply is switched off and back
on to the hob.
To avoid unintentional switching on of the
appliance, e.g. by small children and pets, we
recommend activation of the key lock feature.
Switching on the hob
Touch and hold the on/off symbol for 1
sec. The hob will beep and all energy level
indicators will display “0”.
If no other symbol is selected within 10 secs
the hob will turn off.
Operating a zone
Ensure the Key lock is deactivated.
Touch the On/Off Key for 1 second a beep
sounds and the cook zone displays become
illuminated.
Touch the required cook zone key.
Whilst selected, adjust the cook zone power
OHYHODVUHTXLUHGE\IROOZLQJWKHVWHSVLQÀJ
Then either touch the cook zone key again to
FRQÀUPWKHVHWWLQJRUDIWHUVHFRQGVWKH
hob will auto set the hob power and will beep
DQGVWRSÁDVKLQJ
To adjust the power setting see use the slider
DVLQÀJ
Repeat as necessary for the other zones.
Switching a zone off
Touch the required cook zone key until the
]RQHGLVSOD\ÁDVKHVQRZUHWXUQWKHSRZHU
OHYHOWRE\XVLQJWKHVOLGHUDVLQÀJ
'XDO=RQH,IÀWWHG
Note: The dual zone is where the inner ring of the
heating element can be controlled separately.
Note; Generic illustration shown above your
appliance may visually dier.
COOK ZONE KEY (INNER ONLY)
CENTRAL DUAL ZONE KEY (INNER & OUTER)
1
2
1
2
To operate the dual cook zone
Select the appropriate cook zone and set the
power level as per the single zone
:KLOVWWKHKHDWHUGLVSOD\LVVWLOOÁDVKLQJSUHVV
the central dual zone key, a red LED will illu-
minate next to the cook zone to indicate it has
been activated.
The power level of the cook zone will stop
ÁDVKLQJDQGWKHSRZHUOHYHOLVVHW
To de-select the dual cook zone
Touch the cook zone Key, the power level
GLVSOD\ZLOOVWDUWÁDVKLQJ
:KLOVWWKHSRZHUOHYHOGLVSOD\LVÁDVKLQJSUHVV
the centre dual zone key or return the power
level to “0” and the red led will disappear and
the inner and out elements will be disconnect-
ed. i.e. centre element controlled only.
Note: Only the inner ring can be be operated on its
own, the outer ring can only be operated with the
inner ring, match your pan accordingly.

_ 09
User manual LAM1625
Notes on use
The power settings on the hob do not indicate
any set temperature and cannot be used to
judge one element against another.
During cooking, the elements will cycle on and
off. This is normal.
6WRSJR3DXVHIXQFWLRQ
The Pause function allows temporary pausing
of the cooking process, if the Pause key is
touched for more than 120 milliseconds.
Pause LED blinks, a pause sound is heard and
the hob is stopped,
the heaters actual power settings are stored
and all the active heaters power are set to 0,
the heaters auto switch off time is stopped,
all the timers running count downs are
stopped,
all keys are locked except the Pause key, and
the on / off key,
the timer displays nothing, and all the heater
led’s display 0
Timed cooking
R
e
f
ere
d
zone
LED’s
Timer
Timer adjust indicator
All 5 cooking zones can be operated under the
timer independently and at the same time for
up to 99 minutes. When the set time expires the
timer will beep and the cook zone will switch off
automatically.
To set the timed cooking to a zone:
Set the desired zone power level as described
previously.
:KLOVWWKHFRRN]RQHSRZHUOHYHOLVÁDVKLQJ
WRXFKWKH´ǗµRU´9µNH\VDQGWKHWLPHU
will illuminate “00” also two Red LEDs will
LOOXPLQDWHWKHÀUVWRQHZLOOEHÁDVKLQJRQWKH
timer to indicate the activated timed cook
zone and the second one “00.” Indicates that
the time can be adjusted.
8VLQJWKH´ǗµRU´9µV\PEROVVHWWKHWLPH
required in minutes.
To check remaining time:
Touch the symbol for the desired zone followed
by the timer symbol.
To adjust the set time:
Touch the symbol for the desired zone followed
by the timer symbol.
8VLQJWKH´ǗµRU´9µV\PEROVUHGXFHRU
increase the time required (in minutes).
To deactivate timed Cooking:
Touch the symbol for the desired zone followed by
the timer symbol.
$GMXVWWKH´9µV\PEROGRZQWR´µ$WWKHHQGRIWKH
cooking time
At the end of the cooking time the buzzer will
DFWLYDWHDQGWKH]RQH·V/('ZLOOÁDVK7RXFKWKH
zone key to deactivate.
Residual heat indicator
If the glass surface is hot an “H” will be displayed in
WKHFRRN]RQHGLVSOD\XQWLOWKHJODVVKDVVXIÀFLHQWO\
cooled.
´+µDQG´µZLOOÁDVKDOWHUQDWLYHO\LIWKHFRRN
zone is hot and another cook zone is in use.
lock:
When the system is in child lock the controls
are deactivated. To lock and unlock the hob
touch and hold the key symbol.
Safety shut off
If the power level of a zone is not changed
for a long period of time the cook zone will
automatically switch off. The maximum time a
cook zone can stay on depends on the power
level.
Power Level Max. time on (hrs)
110
25
35
44
53
62
72
82
91
Using the hob

10_
LAMONA Appliances
04 - Cleaning & maintenance
Ceramic glass hobs
It is recommended that you clean and wash
WKHKREVXUIDFHEHIRUHXVLQJIRUWKHÀUVWWLPH
Apply a thin coat of ceramic hob cleaner to the
hob to help maintain and protect it.
The ceramic hob top can be cleaned using a
clean, damp cloth or kitchen paper. Do not
use a used dishcloth or sponge as they can
OHDYHDÀOPRIGHWHUJHQWRQWKHVXUIDFHZKLFK
can lead to discoloration. Please ensure that
the elements are cooled fully to avoid steam
burns.
You can use a specialist ceramic cleaner to
restore the surface, but use sparingly to avoid
coating the hob top too thickly. Too much
cream cleaner will lead to discolouration. Use
a dry, clean cloth to polish the surface.
For stubborn marks, a specialist hob scraper
or cleaner can be used.
Do not use steam cleaners or high-pressure
cleaning equipment.
Regular cleaning will prevent any salts or
minerals from accumulating on your hob and
discolouring the glass.
Wipe any spillage as soon as possible.
Clean the hob top as regularly as possible, this
will prevent any build up of grease which may
EHDÀUHKD]DUG
Foods with high sugar content (toffee, fruit
juice, jam, etc.) that boil over while cooking, or
spattered sugar stains must be immediately
removed using a scraper even if hot.
Notes:
The edge of the ceramic glass will always
appear to be a different colour than the top
surface due to the ground safety edge.
Scratches or dark stains on the ceramic
glass that cannot be removed do not affect the
function of the appliance.
Safety when Cleaning
For cleaning, the appliance must be switched
off and cooled down.
Risk of burns from residual heat.
Cleaning and maintenance

_ 11
User manual LAM1625
05 - Troubleshooting
If you encounter a problem, it is often something minor, please read some of the suggested tips below.
The hob is not working Check the fuse/circuit breakers to see if you are experiencing a power
failure
The hob has turned itself off Check that the main on/off switch has not been touched or covered
accidentally, remove any objects on the hob and try turning it back
on again.
Repairs Repairs are to be carried out by trained service technicians.
Display F and letters If “F” and letters appear on the display, your unit has detected a
fault, the following table lists actions you should take to correct the
problems
Error codes
Trouble shooting
Appliance errors
Event that generates the
error
(Visualization Priority Order)
Description Heater Display
(fore 0.5 sec./ back 0.5 sec)
Effect in the
appliance Normal status recovery
Microcontroller fault Microcontroller Internal
Error ‘F0’ App. off -------
On/Off key emitter fault Security Key Error ‘FA’ App. off When the fault disappears
On/Off key receiver fault Security Key Error ‘FC’ App. off When the fault disappears
User interface temperature
sensor short-circuit Touch NTSC Error ‘FE’ App. off When the fault disappears
User interface temperature
sensor open-circuit Touch NTc Error ‘Ft’ App. off When the fault disappears
User interface
overtemperature > 96ºC
Touch NTc Error,
switching off all heaters. ‘Fc App. off When user interface
temperature < 89ºC
EEPROM fault Eeprom Checksum Error ‘FH’ App. off -------
Microcontroller A/D
converter multiplexer fault Security Key Error ‘FJ’ App. off When the fault disappears
Ambient Light fault Keyboard Error ‘FL’ App. off When satisfactory ambient
lighting is detected
Microcontroller A/D
converter conversion fault Security Key Error ‘FU’ App. off When the fault disappears
Radiant Heater errors
Event that generates the
error
(Visualization Priority Order)
Description Heater Display
(fore 0.5 sec./ back 0.5
sec)
Effect in the
appliance Normal status recovery
Microcontroller fault Microcontroller Internal
Erro
r
‘F0’ App. off -------
Communication fault Communication Error ‘F5’ Heaters Off When the fault disappears
Heater control temperature
sensor short-circuit HC NTSC Error ‘F3’ Heaters Off When the fault disappears
Heater control temperature
sensor open-circuit HC NTSC Error ‘F4’ Heaters Off When the fault disappears
Heater control relay fault HC Relays Failure ‘Fr’ Heaters Off When the fault disappears

12_
LAMONA Appliances
06 - Installation
Installation
General information
,QVWDOODWLRQVKRXOGRQO\EHFDUULHGRXWE\DTXDOLÀHG
installer or engineer.
Please keep to the following points most carefully;
Although every care has been taken to ensure
this appliance has no burrs, or sharp edges, we
recommend that you wear protective gloves when
installing and moving this appliance. This will
prevent injury.
The minimum distances to other appliances and
units are to be observed.
Wall surfaces above the work surface and
in the immediate vicinity of the cooking
hob must be heat resistant.
Laminated surfaces and the adhesive used for
À[LQJWKHPPXVWEHKHDWUHVLVWDQWLQRUGHUWRDYRLG
any damage.
The space for air circulation, located
underneath and at the back of the hob
improves its reliability by ensuring that it
ZLOOFRROGRZQHIÀFLHQWO\
Installations should be carried out in line
with the National Regulations applicable
with this product type.
Note: Avoid installing the appliance next to doors
and under windows. This will avoid the potential
for hot cookware being knocked off the hob when
doors and windows are opened (Risk of burns).
Built-in appliances may only be used after they have
been built-into suitable built-in units and surfaces
that meet the required standards.
Positioning
Choosing your installation
We recommend that you install this appliance in a
work top which is a minimum 38mm deep.
7KHKREFDQEHÀWWHGLQWRDZRUNWRSOHVVWKDQ
38mm deep, but the 25mm gap between hob base
and appliance must be maintained.
Installation above a unit with a drawer or door
The base of the appliance must be protected
from damage e.g. drawers may only be
LQVWDOOHGSURYLGLQJDSDUWLWLRQSDQHOLVÀWWHG
to the required dimensions underneath the
appliance.
Worktop
25mm
Partician
Hob
Partition
INSTALLATION ABOVE A UNIT WITH
A DRAWER OR DOOR
Installation above an oven
Refer to the manufacturer’s instructions for
clearances above the oven. We recommend a
minimum 25mm gap between the bottom of
the hob and appliance
Worktop
25mm
oven or partition
Hob

_ 13
User manual LAM1625
Installation
Clearances and dimensions – requirements
No shelf or overhang of combustible material
should be closer than 650mm above the hob.
There must be a minimum clearance of 50mm
between the edges of the hob and any side
walls; this clearance must be maintained up to
420mm above the worktop.
When installing an extractor hood above the
hob, refer to its manufacturer’s instructions
Clearances and dimensions – requirements
There must be a minimum clearance of 50mm
between the rear edge of the hob and the rear
wall. This clearance must be maintained up to
650mm above the worktop (unless otherwise
stated in your extractor manual)
Minimum height to extractor
as recommend in extractor
instruction manual
*
(
737.5mm (77cm Hobs)
50mm min
50mm Min
50mm min
420mm min
487.5mm (77cm Hobs)
Minimum distance
between carcasses must
be equal to width of hob
*
650mm min
30mm min /
50mm max

14_
LAMONA Appliances
Installation
Fitting into worktop
Cut a hole in the work surface to the required size.
(737.50mm x 487.5mm) as illustrated above.
A clearance of at least 50mm should be maintained
between the cutout and any rear or side wall.
The worktop must be of heat-resistant material or
covered with heat-resistant material.
Protecting the cut-out
The types of chipboard used for work
surfaces swell relatively quickly in contact with
humidity.
Apply a suitable sealant to the cut edge to protect it
from moisture ingress.
Self Adhesive Seal
Apply the self adhesive seal to the underside edges
of the hob glass. For best results, the seal should
be adhered along each side in turn, as close to
the edge as possible, and trimmed at each corner,
taking care to ensure a neat join.
This hob can be installed conventionally
(glass above the work top) or recessed into the work
WRSIRUDÁXVKÀW
Conventional Installation
,QVWDOOWKHVSLUHFOLSVVKRZQLQÀJ$
Place the hob in the aperture, checking the hob
glass is covering the work top along all four sides.
Set the front edge of the appliance parallel with the
front of the work top.
Locate and attach the securing clamps as required,
Tighten the screws so that the hob is pulled down
ÀUPO\DJDLQVWWKHZRUNWRSWKXVHQVXULQJDJRRG
seal.
Recessed method
Recess the work top to the appropriate depth
$SSUR[PPDQGVKDSHWRÀWWKHKREDGGPPWR
overall glass size.
,QVWDOOWKHVSLUHFOLSVVKRZQLQÀJ$
Insert the hob into the recess, ensuring that the
foam seal is sitting correctly.
Locate and attach the securing clamps to the
front and rear underside of the hob, using the
screws provided. Tighten the screws so that the
KRELVSXOOHGGRZQÀUPO\DJDLQVWWKHZRUNWRSWKXV
ensuring a good seal.
<RXPD\ZDQWWRÀOODQ\JDSEHWZHHQWKHKREWRS
glass and the work top surface with silicone sealant.
'2127ÀWVLOLFRQHVHDODQWXQGHUWKHJODVVKRE
instead of foam seal.
1
1. Self adhesive seal
Worktop Hob
CONVENTIONAL INSTALLATION
1
Worktop Hob
RECESSED METHOD
1. Self adhesive seal
2. Silicone sealant
21

_ 15
User manual LAM1625
Fixing brackets
Installation advice :
Depending on the cabinets, the worktop thickness
and the hob positioning, it is possible for the hob
base and/or the clamp brackets to interfere with
parts of the cabinet.
If necessary cut away cabinetry and use appropriate
À[LQJEUDFNHWVIRU\RXULQVWDOODWLRQ
Typical Installation positions
Typical Installation positions
Seal
Underside of hob
Secure the hob to the worktop by means
of the brackets provided, taking the thickness
of the worktop into account.
ÀJ$
Worktop
Screw
Bracket
Spire clip
1
2
3
4
30mm
40mm
50mm
1
2
3
4
70 & 90cm
Appliances only

16_
LAMONA Appliances
Connect to the electricity Supply
This appliance must be earthed. Only connect
to the electrical mains terminal with the power
switched off. The electrical mains terminal is live.
Follow the terminal block connection schematic.
Loose and inappropriate connections can make the
terminal overheat.
(QVXUHWKHFDEOHFODPSLVÀWWHGFRUUHFWO\DQG
securely.
A device must be provided in the electrical
installation which allows the appliance to be
disconnected from the mains at all poles with a
contact opening of at least 3mm.
We recommend that the appliance is connected
by a competent person who is a member of a
“Competent Person Scheme” who will comply with
the required local regulations.
Connection should be made with a suitable cable.
Ensure that you route all mains electrical
cables well away from any adjacent heat source,
such as an oven or grill.
Firstly open the terminal block cover using a small
ÁDWEODGHGVFUHZGULYHULQWKHGRRUUHOHDVHWDEV
shown.
Strip the wires & connect to the terminal block as
shown in the terminal block schematic.
Fit the cable clamp & secure with the screw
provided.
Close the terminal box, ensuring that the cover is
closed and all screws are tight and in place.
Note; The cable clamp has a ratchet type
mechanism on the right hand side of the retaining
arm.
Installation
Door release tab
Cable clamp screw
Cable clamp ratchet
1
2
3
1
2
3
4
5
Live
Neutral
Earth
4
5
BROWN / L1
BLUE / N
GREEN/YELLOW / PE
230V.....240V
Terminal Block Connection
Schematic

_ 17
User manual LAM1625
Technical data
Technical Data
Electrical Supply a9+]
7RWDO3RZHU5DWLQJ#9
~ 50Hz (kW) 7.53kW
Hob Details
Cook Zone Normal Power
Rating kW@230V
LH Front 1.65
LH Rear 1.1
Center dual
RH Rear
0.69 / 2.0
1.1
RH Front 1.65
Hob Dimensions (W X D X H) mm 770 x 520
Cut Out Required (W x D) mm 737.5 x 487.5
Cable Type HORR-F5 4.0mm ², 3 core or equivalent
Installation

18_
LAMONA Appliances
07 - Your guarantee
Product Guarantee Details (UK only)
<RXUDSSOLDQFHKDVWKHEHQHÀWRIDFRPSUHKHQVLYHPDQXIDFWXUHU·VJXDUDQWHHZKLFKFRYHUVWKHFRVWRI
EUHDNGRZQUHSDLUV'HWDLOVRIZKLFKDUHVKRZQRQ\RXU3URRIRI3XUFKDVH'RFXPHQW
Any claim during the period of the guarantee (MUST BE ACCOMPANIED BY THE PROOF OF PURCHASE)
The product must be correctly installed and operated in accordance with the manufacturer’s
instructions and used for normal domestic purposes.
This guarantee does not cover accidental damage, misuse or alternations which are likely to affect the
product.
The guarantee is invalid if the product is tampered with, or repaired by any unauthorised person.
7KHJXDUDQWHHLQQRZD\DIIHFWV\RXUVWDWXWRU\RUOHJDOULJKWV
What to do if you need to report a problem-
Please ensure you have ready:
7KHSURGXFW·VPRGHOVHULDOQXPEHUV
Howdens Proof of Purchase document
Your full contact details
Call the Service Line on 0845 00 60 006
Your guarantee

_ 19
User manual LAM1625
Model LAM1625
Type of hob Ceramic
Noofcookingzones 5
HeaƟngtechnology Ceramic
ႇ
FL - 180mm
RL - 150mm
FR - 180mm
RR - 150mm
Centre - 210mm
ECelectriccooking FL - 200Wh/kg
RL - 184.5 Wh/kg
FR - 200 Wh/kg
RR - 194.2Wh/kg
Centre - 185.4 Wh/kg
ECelectrichob 192.4 Wh/kg
CommissionRegulaƟon(EU) No 66/2014
Product InformaƟon

Z
If supplied, please stick your self adhesive product rating plate
here, or make a note of the product serial number below in the
box below for future reference.
Serial Number : ...........................................................................................
083316802 v3 17-11-15
Other manuals for LAM1625
1
Table of contents
Other Lamona Hob manuals

Lamona
Lamona LAM1748 Guide

Lamona
Lamona LAM1009 Guide

Lamona
Lamona LAM1749 Guide

Lamona
Lamona LAM1216 Guide

Lamona
Lamona LAM9501 User manual

Lamona
Lamona LAM1113 Guide

Lamona
Lamona LAM1763 Troubleshooting guide

Lamona
Lamona LAM1800 User manual

Lamona
Lamona LAM1701 Troubleshooting guide

Lamona
Lamona LAM1850 Guide

Lamona
Lamona LAM1742 Troubleshooting guide

Lamona
Lamona LAM1210 Troubleshooting guide

Lamona
Lamona LAM 1000 Troubleshooting guide

Lamona
Lamona LAM1746 Guide

Lamona
Lamona LAM1761 Troubleshooting guide

Lamona
Lamona LAM1803 User manual

Lamona
Lamona LAM1625 Troubleshooting guide

Lamona
Lamona LAM1500 User manual

Lamona
Lamona LAM1501 Guide

Lamona
Lamona LAM1006 User manual