Lamona LAM1501 Guide

www.howdens.com/appliance-registration
Gas On Glass Hob 4-Zone LAM1501
Instructions and Installation
ISSUE v2.1 130522

2www.howdens.com
Gas On Glass Hob 4-Zone LAM1501

3
Instructions and Installation
Welcome
Dear Customer,
Congratulations on your choice of hob.
The user manual will help you use your product quickly
and safely.
• Please read this user manual before installing
and using the hob.
• Always follow the safety instructions.
• Keep this user manual within easy reach for future reference.
• Register your appliance to access a digital copy of your user
manual for future reference.
• Please read any other documents supplied with the product.
Explanation of symbols
Throughout this manual the following symbols are used.
Warning for possible hazards to health
and property.
Warning possibility of an electric shock.
Warning of risk of fire.
Warning of hot surfaces.
Important information or useful usage tips.
Read the user manual.

4www.howdens.com
Gas On Glass Hob 4-Zone LAM1501
Contents
1. Before using the hob 5
2. Safety 5
General 5
Fire safety advice 6
If a pan catches fire 6
Deep-fat frying 7
Safety when working with gas 7
What to do if you smell gas 8
Carbon monoxide 8
Glass warning 8
3. Environmental instructions 9
Waste regulation 9
Package information 9
Future transportation 9
4. Using the hob 10
Hob layout 10
Burner controls 10
Igniting the burners 10
Burner caps 13
5. Cleaning and maintenance 14
How to clean your hob 14
How to clean glass surfaces 15
6. Installation 16
General information 16
Room ventilation 16
Positioning 16
Protecting the hob cut out 17
Clearances and dimensions 18
Installation above an oven 19
Self-adhesive seal 19
Installation above kitchen unit
with door and drawer 20
Elbow installation 21
Gas connection 21
Adapting the hob to different
types of gas 22
Regulating the minimum 23
7. Electrical connections 24
8. Technical specifications 26
9. Troubleshooting 27
10. Your guarantee 28

5
Instructions and Installation
1. Before using the hob
2. Safety
• This appliance is for domestic cooking purposes only. It must not
be used for other purposes, for example room heating.
General
• WARNING: Accessible parts may become hot during use. To avoid
burns, children less than 8 years of age should be kept away unless
continuously supervised. This appliance can be used by children aged
8 years and above, persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children must
not play with the appliance. Cleaning and user maintenance must
not be made by children without supervision. This appliance is not
suitable for use on any type of boat (offshore, inland waterway, canal
boat or boat house), caravans or motor homes.
• Servicing should be carried out only by authorised personnel.
• This appliance must be installed so that it can be electrically isolated
by a switch after installation.
• If power cable is damaged do not use hob. Replacement cable
should be fitted by a suitably competent person.
• Do not spray aerosols in the vicinity of this appliance while it is in
operation. Do not store or use flammable liquids or items in the vicinity
of this appliance.
• Do not modify this appliance.
• Always ensure that pan bases are dry and flat before using them
on the hob.
• Always position pans over the centre of the heat zone, and turn
the handles to a safe position so they cannot be knocked over or
grabbed by children.
• Make sure that you have removed all packaging, wrappings,
stickers and films from the hob surface.
• It is recommended that you clean the hob surface before using
for the first time (see page 14).

6www.howdens.com
Gas On Glass Hob 4-Zone LAM1501
• Never use pans smaller than 100mm (4”) and larger than 250mm
(10”).Match the size of pan to the heat zone – do not use large pans
on small zones or vice versa.
• Always lift pans onto and off the hob, rather than sliding them across
the surface to avoid marks and scratches.
• Do not use double pans, rim-based pans, old or misshapen pans,
or any pan that is not stable on a flat surface.
• Never leave cooking fat or oil unattended.
• Never use commercial simmering aids, or heat diffusers, as they
create excessive heat and can damage the surface of the hob.
• Never use the hob for any other purpose than cooking food.
• WARNING OF FIRE
• Never store items or leave plastic utensils close to, or on top of the hob.
• Never leave any cook zone on without a pan covering it. This causes
a potential fire hazard.
• Never heat up a sealed tin of food on the hob, as it may explode.
• Never leave pans overhanging the edge of the hob.
Fire safety advice
• Most kitchen fires occur when people are distracted or leave things
unattended, so remember:
• If you’re called away from the hob - by the phone or someone at the
door, either take pans off the heat, or switch off your hob.
• Don’t let yourself be distracted while cooking.
• If you do have a fire in the kitchen, don’t take any risks – get everyone
out of your home and call the Fire Service.
If a pan catches fire
• Do not move it as it’s likely to be extremely hot.
• Turn of the heat if it’s safe to do so, but never lean over a pan
to reach the controls.
• Use fire blanket or a damp tea-towel to cover the pan.
• If you have put the fire out, leave the pan to cool completely.

7
Instructions and Installation
Deep-fat frying presents more dangers in your kitchen
• Never fill a chip pan (or other deep fat fryer) more than one-third
full of oil.
• Do not use a fire extinguisher on a pan of burning oil – the force of
the extinguisher can spread the fire and create a fireball.
Safety when working with gas
• Any works on gas equipment and systems may only be carried out
by authorised qualified persons who are Gas Safe registered.
• Prior to the installation, ensure that local distribution conditions
(nature of gas and gas pressure) and the adjustment of the
appliance are compatible.
• The appliance is not connected to a combustion products evacuation
device. It shall be installed and connected accordance with current
installation regulations. Particular attention shall be given to the
relevant requirements regarding ventilation.
• The use of gas cooking appliance results in the production of heat
and moisture in the room in which it is installed. Ensure that the
kitchen is well ventilated: keep natural ventilation holes open or
install a mechanical ventilation device (mechanical extractor hood).
Prolonged intensive use of the appliance may call for additional
ventilation, for example increasing the level of mechanical ventilation
where present.
• Good combustion is required in gas appliances. In case of
incomplete combustion, carbon monoxide (CO) might develop.
• Clean the gas burners regularly. The flames should be blue
and burn evenly.
• Carbon monoxide is a colourless, odourless and very toxic gas,
which has a lethal effect even in very small doses.
• Gas appliances and systems must be regularly checked for
proper functioning. Connections, hoses, clamps etc. should be
checked regularly.
• Request information about gas emergency telephone numbers
and safety measures in case of gas smell from you local gas provider.

8www.howdens.com
Gas On Glass Hob 4-Zone LAM1501
What to do if you smell gas
• Do not use open flame or do not smoke. Do not operate any
electrical buttons (e.g. lamp button, door bell etc.). Do not use mobile
phones. Risk of explosion and intoxication!
• Open the doors and windows.
• Turn off all valves on gas appliances and gas meter at the main
control valve, unless it’s in a confined space or cellar.
• Check all tubes and connections for tightness. If you still smell gas
leave the property.
• Warn the neighbours.
• Call your gas companies emergency number or call the fire brigade.
Use a phone outside of the house.
• Do not re-enter the property until you are told it is safe to do so.
Carbon monoxide
This product should be used in a room which incorporates a properly
adjusted and functioning carbon monoxide sensor. Make sure the
carbon monoxide sensor works properly and is maintained frequently.
Carbon monoxide sensor should be installed maximum 2 metres away
from the product.
Glass warning
If the surface is cracked, switch off the appliance to avoid the possibility
of an electric shock. In case of hotplate glass breakage:
• Immediately shut off all burners and any electrical heating element
and isolate the appliance from the power supply.
• Do not touch the appliance surface.
• Do not use the appliance.

9
Instructions and Installation
Waste regulation
Disposing of the old product. Compliance with the WEEE Directive
and disposing of the waste product:
This product complies with EU WEEE Directive (2012/19/EU).
This product bears a classification symbol for waste
electrical and electronic equipment (WEEE).
This product has been manufactured with high quality
parts and materials which can be reused and are suitable
for recycling. Do not dispose of the waste product with
normal domestic and other wastes at the end of its
service life. Take it to the collection centre for the recycling
of electrical and electronic equipment. Please consult your local
authorities to learn about these collection centres. Appropriate disposal
of used appliance helps prevent potential negative consequences for
the environment and human health.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive
(2011/65/EU). It does not contain harmful and prohibited materials
specified in the Directive.
Package information
• Packaging materials of the product are manufactured from
recyclable materials in accordance with our National Environment
Regulations. Do not dispose of the packaging materials together with
the domestic or other wastes. Take them to the packaging material
collection points designated by the local authority.
Future transportation
• Keep the product’s original carton and transport the product in it.
Follow the instructions on the carton. If you do not have the original
carton, pack the product in bubble wrap or thick cardboard and
tape it securely.
Check the general appearance of your product for any
damages that might have occurred during transportation.
3. Environmental instructions

10 www.howdens.com
Gas On Glass Hob 4-Zone LAM1501
4. Using the hob
Hob layout
1Pan support
2Auxiliary burner
3Assembly clamp
4Control panel
5Base cover
6Normal burner
7Main body (tempered glass)
8Rapid burner
9Normal burner
Igniting the burners
WARNING! Be careful when
you use open flames in the
kitchen environment. The
manufacturer declines any
responsibility in the case of
misuse of fire.
Always light the burner before
you put any cookware on it.
To light the burner:
1. Turn the control knob
anti-clockwise to the maximum
position and push it down.
2. Keep control knob pushed in
for approximately 5 seconds,
this will let the thermocouple
warm up. If not, the gas supply
will be interrupted.
3. Adjust the flame.
WARNING! Do not keep
the control knob pushed in
for more than 15 seconds,
release the control knob,
turn it into off position and
try to light the burner again
after a minimum of 1 minute.
Burner controls
Max
Position
Rapid burner
Rear left
Normal burner
Front left
Auxiliary burner
Front right
Normal burner
Rear right
1
2
5
43
6
7
8
9

11
Instructions and Installation
When transferring pans from
one burner to another always
lift the pans do not slide them.
DANGER: Risk of overheated
oil. When you heat the oil,
do not leave it unattended.
Never try to extinguish it the
fire with water! When oil
has caught fire, immediately
cover the pot or pan with
a lid. Switch off the hob if
safe to do so and phone the
fire service.
Ensure handles of pans
cannot accidentally be
caught or knocked over and
do not get hot by adjacent
heating zones. Avoid pans
that are unstable and easily
tipped. Pans that are too
heavy to move easily when
filled can also be a hazard.
Only use flat bottomed pots
or pans.
Use pans which have
sufficient capacity for the
amount of food being
cooked so they don’t boil
over and cause unnecessary
cleaning.
Do not place lids on
the burners.
Always position pans centrally
over the burners.
Cooking with gas
WARNING! Do not use
cooking pans beyond
the dimension limits given
overleaf (see page 12).
Using larger pans causes
risk of carbon monoxide
poisoning, overheating
of adjacent surfaces and
control knobs. Using smaller
pans causes your risk of
being burned by the flame.
The size of the pan and the size
of the gas flame should match
each other. Adjust the gas flames
so that they do not go beyond the
bottom of the pan always place
the pan onto the pan support in
a central position.
If the burner accidentally goes
out, turn the control knob to
the off position and try to light
the burner again after minimum
1 minute.
The spark generator can start
automatically when you switch
on the mains, after installation
or a power cut. It is normal.
Turning off the burner
To put the flame out, turn the
knob symbol.
WARNING! Always turn the
flame down or switch it off
before you remove the pans
off the burner.

12 www.howdens.com
Gas On Glass Hob 4-Zone LAM1501
HELPFUL HINTS AND TIPS
Energy savings;
• If possible, always put the lids
on the pans.
• When the liquid starts to boil,
turn down the flame to barely
simmer the liquid.
WARNING! Use pots and pans
with diameter applicable to
the dimension of the burner.
Do not use cooking vessels
on the hotplate that overlap
its edges.
WARNING! Pots must not enter
the control zone.
WARNING! Flame diffusers
are not recommended.
WARNING! Make sure pot
handles do not protrude
over the cooker top and that
pots are centrally positioned
on the rings in order to
achieve maximum stability
and to obtain a lower
gas consumption.
Do not place unstable or
deformed pots on the rings to
prevent from spill and injury.
Information on acrylamides
IMPORTANT! According to the
newest scientific knowledge,
if you brown food (specially
the one which contains
starch), acrylamides can
pose a health risk. Thus, we
recommend that you cook at
the lowest temperatures and
do not brown food too much.
Flame failure device
In case of flame failures of the
burners for any reason, the flame
failure sensor Awill cut off the
gas flow after a few seconds.
If this occurs, depress and turn
the control knob to the ignition
position clockwise direction and
wait for ignition.
Keep the knob at pressed position
for 3 - 5 seconds after you see
the flame around the burner.
Repeat the sequence of
operations if the flame does
not continue.
After you release the knob, if the
ignition does not continue repeat
the same process by keeping the
knob pressed for 15 seconds.
Burner Diameter of
cookware
Rapid 220mm - 240mm
Front semi-rapid 180mm - 200mm
Rear semi-rapid 180mm - 200mm
Auxiliary 120mm - 180mm
Spark
Electrode
A

13
Instructions and Installation
DANGER! Risk of fire in case
of unburned gas!
Do not press the knob for longer
than 15 seconds if there was no
ignition. Wait for one minute and
then repeat the ignition process.
Burner caps
CAUTION! Any cleaning
agent used incorrectly
may damage the hob.
Always let the hob cool
before cleaning.
Burner caps and heads
IMPORTANT Allow burners
to cool before cleaning.
CAUTION: Hotplate
burners can be damaged
by soaking, automatic
dishwashers (or dishwasher
powders / liquids, caustic
pastes, hard implements,
coarse wire wool, and
abrasive cleaning pastes.
Clean with a moist soapy pad.
For the burners to work safely, the
slots in the burner head where the
flames burn need to be kept clear
of deposit. Clean with a nylon
brush, rinse and dry thoroughly.
IMPORTANT! The burner
caps and heads must be
repositioned correctly so that
they sit squarely onto the hob
as shown below.
This is particularly important with
stainless steel models as failure
to reposition the caps correctly
may result in discolouration of the
stainless steel around the burners.
Correct
Burner head
Burner cap
Parallel
Burner cap not central
Incorrect
Incorrect
Angled
1Burner cap
2Burner crown
3Ignition candle
4Thermocouple
1
2
4
3

14 www.howdens.com
Gas On Glass Hob 4-Zone LAM1501
5. Cleaning and maintenance
How to clean your hob
• Allow the product to cool down
before you clean it. Hot surfaces
may cause burns.
• Clean the product thoroughly
after each use. In this way it will
be possible to remove cooking
residues more easily, thus
avoiding these from burning the
next time the appliance is used.
• No special cleaning agents
are required for cleaning the
product. Use warm water with
washing liquid, a soft cloth or
sponge to clean the product
and wipe it with a dry cloth.
• Always ensure any excess liquid
is thoroughly wiped off after
cleaning and any spillage is
immediately wiped dry.
• Clean the control panel and
knobs with a damp cloth and
wipe them dry.
• Do not use cleaning agents
that contain acid or chloride
to clean the stainless or inox
surfaces and the knobs. Use a
soft cloth with a liquid detergent
(not abrasive) to wipe those
parts clean, paying attention
to sweep in one direction.
• Remove and clean the pan
supports and burner caps.
• Clean the hob (do not use
steam cleaners).
• Install the burner caps and
make sure that they are
seated correctly.
• When replacing the pan
supports ensure the burners
are centred.
• Do not remove the control
knobs to clean the control
panel. Control panel may be
damaged!

15
Instructions and Installation
WARNING! If the surface
is cracked, switch off the
appliance to avoid the
possibility of an electric
shock. In case of hotplate
glass breakage: Immediately
shut off all burners and any
electrical heating element
and isolate the appliance
from the power supply.
• Do not touch the appliance
surface.
• Do not use the appliance.
How to clean glass surfaces
Wipe the glass ceramic surface
using a piece of cloth dampened
with cold water in a manner as
not to leave any cleaning agent
on it. Dry with a soft and dry
cloth. Residues may cause
damage on the glass ceramic
surface when using the hob for
the next time. Dried residues on
the glass ceramic surface should
under no circumstances be
scraped with hook blades, steel
wool or similar tools.
Remove calcium stains (yellow
stains) by a small amount of lime
remover such as vinegar or lemon
juice. You can also use suitable
commercially available products.
If the surface is heavily soiled,
apply the cleaning agent on
a sponge and wait until it is
absorbed well. Then, clean the
surface of the hob with a damp
cloth. Sugar-based foods such
as thick cream and syrup must
be cleaned promptly without
waiting the surface to cool down.
Otherwise, glass ceramic surface
may be damaged permanently.
Slight colour fading may occur on
coatings or other surfaces in time.
This will not affect operation of
the product.
Colour fading and stains on the
glass ceramic surface is a normal
condition, and not a defect.
Clean the control panel
and knobs with a damp cloth
and wipe them dry. Do not
remove the control buttons /
knobs to clean the control panel.
The control panel may get
damaged!

16 www.howdens.com
Gas On Glass Hob 4-Zone LAM1501
6. Installation
General information
Installation should only be carried
out by a qualified installer or
engineer.
Please note:
Although every care has been
taken to ensure this appliance
has no burrs, or sharp edges,
We recommend that you wear
protective gloves when installing
and moving this appliance. This
will prevent injury.
The hob should not be fitted
above a washing machine,
dishwasher, a fridge or a freezer.
Wall surfaces above the work
surface and in the immediate
vicinity of the cooking hob must
be heat resistant.
Laminated surfaces and the
adhesive used for fixing them
must be heat resistant in order
to avoid any damage.
Installations should be carried
out in line with the National
Regulations applicable with this
product type.
Positioning
The hob is designed to be built
into a worktop as detailed in the
image above.
Aperture width:
480 - 490mm x 560mm
The hob may be installed in any
worktop which is heat resistant to
a temperature of 100°C, and has
a cut thickness of 20 - 45mm.
The dimensions of the insert to
be cut-out of the worktop.
If the hob is fitted next to a
cabinet on either side, the
distance between the cut-out
and cabinet must be at least
170mm, while the distance
between the cut-out and the
rear wall must be at least 50mm.
When there is an accessible
space between the built in hob
and the cavity below, a dividing
panel made of insulating material
should be inserted (wood or a
similar material).
Room ventilation
The air for combustion is taken
from the room air and the exhaust
gases are emitted directly into
the room.
Good room ventilation is essential
for safe operation of your
appliance. If there is no window
or door available for room
ventilation, an extra ventilation
must be installed.
Do not install this appliance in
a room below ground level unless
it is open to ground level on at
least one side.
Failure to install correctly is
dangerous and could result
in prosecution.

17
Instructions and Installation
Protecting the hob cut-out
The types of chipboard used
for work surfaces swell relatively
quickly in contact with humidity.
Apply a special varnish or
adhesive to the cut edges
to seal and protect it from
moisture ingress.
Room size Ventilation
opening
Smaller than 5m3Min. 100cm2
5m3to 10m3Min. 50cm2
Greater than 10m3Not required
In the cellar or
basement Min. 65cm2
*Minimum distance.
50mm*
50mm*
480 - 490mm
170mm*
560mm

18 www.howdens.com
Gas On Glass Hob 4-Zone LAM1501
Clearances and dimensions
AMinimum distance between
cabinets must be equal to
overall width of all hobs.
BMinimum height to extractor
as recommended in extractor
instruction manual.
C400mm minimum between
worktop and cabinetry within
170mm either side of the hob.
D170mm minimum between
cut-out and vertical surface
above the worktop.
No shelf or overhang of
combustible material should
be closer than 650mm directly
above the hob.
There must be a minimum
clearance of 50mm between
the rear edge of the cut-out
and the rear wall. This clearance
must be maintained up to
650mm above the worktop
(unless otherwise stated in your
extractor manual).
The rear wall is any vertical
surface behind the hob. If any
tiles, backboards, splashbacks
or upstands are fitted the distance
is taken from the front face of
these items.
50mm min.
560mm
50mm min.
A
BCD
490mm

19
Instructions and Installation
Place the hob in the aperture, checking the hob is covering the
worktop along all four sides. Set the front edge of the appliance
parallel with the front of the worktop.
Secure the hob to the worktop by means of the brackets provided,
taking the thickness of the worktop into account. Your appliance
will be supplied and installed using the following installation method.
The brackets are secured directly into the base of the hob in the
appropriate positions as shown.
Installation above an oven
If the appliance is installed with an oven underneath, please leave
at least 15mm of ventilation, unless otherwise stated in your oven
installation guidelines.
Self-adhesive seal
Turn the hob underside down,
place it on a flat protected surface.
Apply the self-adhesive seal to the
underside edges of the hob glass.
For best results, the seal should be
adhered along each side in turn,
as close to the edge as possible,
and trimmed at each corner,
taking care to ensure a neat join.
DO NOT fit silicone sealant
under the glass hob instead
of the self-adhesive seal.
Installation in the worktop
20mm Worktop
Hob
Hob
Hob
Worktop
Worktop
30mm
40mm
Screw
Screw
Screw

20 www.howdens.com
Gas On Glass Hob 4-Zone LAM1501
Installation above a kitchen unit with door and drawer
If the appliance is installed with an oven underneath, please leave
at least 15mm of ventilation, unless otherwise stated in your oven
installation guidelines.
30mm 30mm
Min. 15mm Min. 15mm
60mm 60mm
15mm
Worktop Hob
Oven or partition
5mm