Lamona LAM1748 Guide

Ceramic Domino Hob LAM1748
Instructions and Installation
www.howdens.com/appliance-registration

See back page for product serial number

_ 03
User manual LAM1748
Dear Customer,
Congratulations on your choice of hob.
The user manual will help you use your product quickly and safely.
• Please read this user manual before installing and using the hob.
• Always follow the safety instructions.
• Keep this user manual within easy reach for future reference.
• Please read any other documents supplied with the product.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful tips about usage.
Warning for possible hazards to health and property.
Warning possibility of electric shock.
Warning of risk of fire.
Warning of hot surfaces.
Product information correct at the time of publication in May 2017.
The company has a policy of continuous product development and reserves the right to change any
products and specifications given in this manual.
The appliance is marked according to the European Directive 2012/19/EU on waste Electrical and
Electronic Equipment (WEEE). By ensuring this product is disposed of correctly you will help prevent
potential negative consequences for the environment and human health. The symbol on this product
indicates that this product may not be treated as household waste. Instead it should be handed over
to the applicable collection point for recycling of electronic equipment. Disposal must be carried out
in accordance with local environmental regulations for waste disposal. For more detailed information
please contact your local council household waste site.
This product complies with EU RoHS Directive (2011/65/EU) It does not contain harmful and prohibited
materials specified in the Directive.

04_
LAMONA Appliances
Index
Before Using the hob 05
05
05
06
07
07
07
08
08
08-09
09
09
09
10
10-11
11
11
12
13
13
13
13
13
13
14
15
15
16-17
17
18
19
Safety
General
Fire safety advice
If a pan catches fire
Deep fat frying
If you have an Electrical Fire
Using your hob
Controls Layout
Turning on the hob
Booster
Turning off the hob
Key lock
Child lock
Timer functions
Operation time limits
Residual heat indicators
Sensor Calibration
Cleaning and Maintenance
How to clean your hob
Installation
General Information
Positioning
Protecting the hob cut out
Clearances and dimensions
Self adhesive seal
Spacing and air gap
Electrical Connections
Technical Data
Troubleshooting
Guarantee

_ 05
User manual LAM1748
• Make sure that you have removed all packaging, wrappings, stickers and films from the hob surface.
• It is recommended that you clean the hob surface before using for the first time (page 13).
Before using the hob
Safety
General
This appliance is for
domestic cooking purposes
only. It must not be used for
other purposes, for example
room heating.
WARNING: Accessible
parts will become
hot during
use. Care should be taken to
avoid touching heating
elements.To avoid burns,
children less than 8 years of
age should be kept away
unless continuously super-
vised.This appliance can be
used by children aged 8 years
and above, persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge if
they have been given supervi-
sion or instruction concerning
use of the appliance in a safe
way and understand the
hazards involved. Children
must not play with the appli-
ance. Cleaning and user
maintenance must not be
made by children without
supervision.
CAUTION: Cooking process
should be supervised continu-
ously.
Servicing should be
carried out only by authorised
personnel.
• This appliance must be
installed so that it can be
electrically isolated by a
switch after installation.
• Only use the connection
cable supplied and as speci-
fied if cable is damaged, it
should be replaced by a suita-
bly qualified person.
• Do not spray aerosols in
the vicinity of this appliance
while it is in operation.
• Do not store or use flam-
mable liquids or items in the
vicinity of this appliance.
• Do not use steam clean-
ers to clean the appliance as
this may cause an electric
shock.
• Always position pans over
the centre of the heat zone,
and turn the handles to a safe
position so they cannot be
knocked over or grabbed by
children.
• Never use pans smaller
than 100mm (4”) and larger
than 250mm (10”).

06_
LAMONA Appliances
• Always match the size of
pan to the heat zone – do not
use large pans on small zones
or vice versa.
• Always lift pans onto and
off the hob, rather than sliding
them across the surface to
avoid marks and scratches.
• Never use double pans,
rim-based pans, old or mis-
shapen pans, or any pan that
is not stable on a flat surface.
• Never use commercial
simmering aids, or heat
diffusers, as they create
excessive heat and can
damage the surface of the
hob.
• Never use the hob for any
other purpose than cooking
food.
WARNING OF FIRE:
• Never store items or leave
plastic utensils close to, or on
top of the hob.
• Never leave any cook
zone on without a pan cover-
ing it. This causes potential a
fire hazard.
• Never use the hob surface
as a chopping board or food
preparation area, as this may
lead to it becoming damaged.
• Never put metal cooking
utensils, cutlery, knives or
other metal objects on the
hob. They could become hot if
they are near a cooking area
which is in use.
• Never leave aluminium
foil on the hob top, it reflects
heat back into the element
which leads to damage.
• Never heat up a sealed tin
of food on the hob, as it may
explode.
• Never leave pans over-
hanging the edge of the hob.
• WARNING: Only use hob
guards designed by the manu-
facturer of the appliance or as
indicated in the instructions
for use as suitable or hob
guards incorporated in the
appliance.The use of inappro-
priate guards can cause
accidents.
• The appliance is not
intended to be operated by
means of an external timer or
separate remote control
system.
• Do not modify this appli-
ance.
• WARNING:Never leave
cooking fat, or oil,unattended.
• CAUTION: If the glass
surface is cracked or broken
do not use the appliance. Risk
of electric shock.

_ 07
User manual LAM1748
Fire safety advice Deep-fat frying presents more
dangers in your kitchen
• Most kitchen fires occur
when people are distracted or
leave things unattended, so
remember:
• If you’re called away from
the hob - by the phone or
someone at the door, either
take pans off the heat, or
switch off your hob.
• Don’t let yourself be
distracted while cooking. DO
NOT LEAVE UNATTENDED.
• If you do have a fire in the
kitchen, don’t take any risks -
get everyone out of your home
and call the Fire Service.
• If you have put the fire out,
leave the pan to cool com-
pletely.
• Never fill a chip pan (or
other deep fat fryer) more
than one-third full of oil.
• Do not use a fire extin-
guisher on a pan of burning oil
- the force of the extinguisher
can spread the fire and create
a fireball.
• Switch off the power at the
fuse box - this may be enough
to stop the fire immediately
• Smother the fire with a fire
blanket, or use a dry powder
or carbon dioxide extinguisher
• Remember: never use
water on an electrical or cook-
ing oil fire.
• Do not move it as it’s likely
to be extremely hot.
• Turn off the heat if it’s
safe to do so, but never lean
over a pan to reach the con-
trols.
• WARNING: Use fire
blanket or a damp tea-towel to
cover the pan.
If a pan catches fire
If you have an electrical fire in
the kitchen

Touch the key on control panel for 2-3 seconds.
Cooking zone displays illuminate.
The hob is ready for use now. symbol and all
decimal points on all cooking zone displays will
flash and the timer display will show
If no operation is performed within 10
seconds, the hob will automatically return to
Standby mode.
If you press main key for longer than 2
seconds, the hob will turn off and return to Standby
mode.
Dot indicates feature ready to be selected or
adjusted
Residual Heat Indicators
CAUTION HOT SURFACE:
H is displayed when the surface temperature of a
cooking zone is sensed to be above 60°C.
When residual heat falls below 60°C, happears
on the display.
08_
LAMONA Appliances
Controls Layout
Turning on the hob
*During the initial startup of the hob (or power
failures) H will be displayed in the cooking zone
displays. These may not disappear until the hob
zones have been used. This is normal; the hob is
calculating surface temperatures for the hob’s
residual heat indicators.
NOTE: DO NOT PLACE HOT PANS ON CONTROL
PAD AREA
Using the hob
Do not use the ceramic hob if the glass surface is cracked, as electrical parts are directly beneath.
Switch off the appliance at the supply to prevent electric shock and contact your supplier.
The appliance is not intended to be operated by means of an external timer or separate control
system.
The hob surface remains hot after use. DO NOT TOUCH.
Cooking zone display
Cooking zone selection controls
Timer Selection
Timer Display
Power / Timer Set
Keylock
Main Key - On/0ff

This function assists faster heating. When Booster
is activated, the zone will operate at maximum
power for a certain limited period of time (see,
Table 1 P11) to reach desired power level.
This is indicated with an "A" and the set
power value which flash alternately on the cooking
zone display (e.g., half second "A", half second "9")
Once the Booster time is over, the power of cooking
zone will just be displayed.
Both cooking zones are equipped with Booster
function.
Using the Booster function:
1.Turn on the hob
2.Select the desired cooking zone
3.Use key to set the cooking zone power value.
Zone power value and Awill appear on the display
alternately.This indicates that power level is set
and Booster function is activated.
Turning off the Booster function:
• Select the desired cooking zone
• Touch key until power level decreases to 0
• Or push the keys Simultaneously.
If you press main key for longer than 2 seconds,
the hob will turn off and return to Standby mode.
If the hob zone surface is hot when the hob is turned
off, this will be indicated with H/hsymbols that
appear on the relevant cooking zone.
Turning off cooking zones individually:
A cooking zone can be turned off in 3 different ways:
1. Select the cooking zone
1.By touching and keys simultaneously.
2.By decreasing the power level to 0.
3.By using the timer function for the relevant
cooking zone (When the time is over, an audible
alarm will sound. Touch any key on the touch
control panel to silence the audible alarm).
Keylock
Power on
Touch the key for longer than 2 seconds to lock
and unlock the touch controls. (Confirmed with an
audible signal). LED will appear and all cooking
zones will be locked.
If the cooking zones are locked: only the main key
can be operated. Otherwise LED and timer
display will appear to indicate controls are
locked.
Note:
If hob is powered off when the keys are locked,
the keylock may be activated next time the hob is
powered on again.
Key lock must be deactivated in order to be able to
operate the hob ; -
Press
Touch the key for longer than 2 seconds to
unlock the touch controls.
Auto Booster
Turning off the hob
Using the hob
_ 09
User manual LAM1748
1.Turn on the hob.
2.Select cooking zone
3.Touch or keys to set the power level
(If you touch these keys for longer, the power
level will continuously increase or decrease).
(If no operation is performed within 10 seconds, the
hob will automatically return to Standby mode).

10_
LAMONA Appliances
Child Lock
Activating child lock
1.Touch power key to turn on the hob.
2.Touch and keys simultaneously for at least
two seconds.
3.Then, touch key once again. » Child Lock
function is activated and L appears on all cooking
zone displays.
Disabling the Child Lock:
1.Touch main key to turn on the hob.
2.Touch and keys simultaneously for at
least two seconds.
3.Then, touch key once again.
Lappears on all cooking zone displays as long as
the Child lock is activated. Lwill disappear when
the lock is deactivated successfully.
Timer function
This feature turns off a cooking zone automatically
at the end of a desired cooking time.
The timer function provides the following options:
A maximum of 2 cooking zone timers and one
alarm (minute minder) cooking timer at the same
time.
Timer as an alarm (Minute Minder)
Alarm timer operates without cooking zone.
1.Touch main key to turn on the hob.
1.Touch key to enable the alarm timer.
will appear on the timer.
2.Set the desired time by touching and
keys.
3.Timer will start to countdown after you have made
the time setting.
When the time is over, an audible alarm will sound.
Touch any key on the touch control panel to silence
the audible alarm.
Cooking zone timer (To turn a cooking zone off
after a period of timed use)
The cooking zone timers can only be set for the
cooking zones that are activated.
1. Turn on the hob
select the desired cooking zone.
2. Select power level between 1 and 9.
3. Enable the cooking zone timer by touching
key x2.
will appear on the display.
An LED illuminates to show the zone selected
that is being timed.
4. Set the desired time value by touching and
keys.
To set additional timers:
Select the other cooking zone using
And select power level
1. Touch the key x2 again (second LED lights up)
(Shown by a flashing LED symbol ).
2. Set the desired time by touching and
keys.
The timer activated for the cooking zone which was
set first is indicated with a continuously flashing LED.
•After 10 seconds, timer display reverts back to the
timer that will end first.
•You can display the values set for cooking zone
timers and alarm timer by pressing the timer key.
A flashing LED always shows the selected zone
Disabling the timers:
Display the timer to be deleted by pressing the
key until the desired timer appears.
This value can be cancelled in 2 different ways:
• By decreasing the value step by step to by
touching key.

_ 11
User manual LAM1748
Table 1
• By touching and keys
simultaneously for half second until
appears on timer display.
When the time is over, an audible alarm will sound.
Touch any key on the touch control panel to silence
the audible alarm.
Operation time limits
The hob control is equipped with an operation time
limit. When one or more cooking zones are left on
the cooking zone will automatically be deactivated
after a certain period of time.(see Table below).
Operation time limit depends on the selected power
level.
If there is a timer assigned to the cooking zone
appears on the timer display for 10 seconds
(10 seconds later, residual heat indicator turns on).
Then, timer display is turned off.
After disabling the cooking zone automatically as
described above, it becomes operational again and
maximum operation times are applied.
0
0
0
0
-
U
45,9
1,1
10
1
1
45,6
1,4
10
82
2
43,5
3,5
5
164
3
41,1
5,9
5
246
4
38,3
8,7
4
328
5
35,7
11,3
3
410
6
32,9
14,1
2
82
7
25,8
21,2
2
164
8
18,8
28,2
2
164
9
0
47,0
1
10
Temperature
Setting
OFF Time-
Seconds
ON Time-
Seconds
Operation time
Limit - Hour
Booster Time-
Seconds

12_
LAMONA Appliances
Sensor Calibration
When the supply power is applied, the hob control
system performs calibration depending on the
sensor, glass and ambient conditions.
Do not cover the glass hob surface with anything
during calibration. The hob control system should
also not be exposed to strong light sources such
as sun light, strong halogen lamps during this time.
If anything covers the control / sensor area
(tea towel etc.), the unit will send an audible F error
and turn off automatically.
Table-2:Error codes
Note:
The touch control area is equipped with a sensor
ensuring protection against over heating. If the
sensor is activated the cooking zone will be
deactivated automatically.
Cause of error
There is a substance on sensor
F
F1
F2
F3
F4
Ambient light is too high
Fluorescent lamp
Sensor is covered with a bright
substance
Ambient light is fluctuating
strongly
Display
The following lightning conditions will allow a
smooth calibration:
Illumination by a lamp without a reflector 70 cm
above the glass ceramic hob. After a successful
calibration, the hob should operate as intended
even under a strong illumination source, such as
a halogen spot light with reflector (50 W). If an error
occurs the calibration is repeated until the ambient
conditions allow for a successful calibration.
The hob control system can only be operated when
the calibration of all sensors has been successful.
You must remove all substances from the hob
surface during calibration. Also the ambient
illumination should not be too strong during
calibration. If one of the F1,F2 or F4 messages is
obtained, user must turn off all light sources or
darken room by closing blinds etc during the
calibration process at first connection to the supply
power.
When the calibration is completed successfully,
the hob control system can tolerate high
amounts of ambient light. The hob control
system adapts and recalibrates itself according
to the changes in ambient lighting conditions
while it is in use.

Cleaning & maintenance
How to clean your hob
Installation
General information
Installation should only be carried out by a qualified
installer or engineer.
Please Note:
Although every care has been taken to ensure
this appliance has no burrs, or sharp edges, We
recommend that you wear protective gloves when
installing and moving this appliance. This will
prevent injury.
The hob should not be fitted above a washing
machine, a fridge or a freezer. Wall surfaces above
the work surface and in the immediate vicinity of
the cooking hob must be heat resistant.
Laminated surfaces and the adhesive used for
fixing them must be heat resistant in order to avoid
any damage.
Installations should be carried out in line with the
National Regulations applicable with this product
type.
Positioning
The hob is designed to be built into a work top as
detailed in the image.
Aperture width 268mm x depth 490mm (+1).
Protecting the Hob cut-out
The types of chipboard used for work surfaces swell
relatively quickly in contact with humidity.
Apply a special varnish or adhesive to the cut edge
to protect and seal it from moisture ingress.
• The ceramic hob top can be cleaned using a
clean, damp cloth or kitchen paper. Do not
use a used dishcloth or sponge as they can
leave a film of detergent on the surface which
can lead to discolouration. Please ensure that
the elements are cooled fully to avoid steam
burns.
• You can use a specialist ceramic cleaner to
restore the surface, but use sparingly to avoid
coating the hob top too thickly. Too much
cream cleaner will lead to discolouration. Use
a dry, clean cloth to polish the surface.
• For stubborn marks, a specialist hob scraper
can be used.
• Do not use steam cleaners or high pressure
cleaning equipment.
• Regular cleaning will prevent any salts or
minerals from accumulating on your hob and
discolouring the glass.
• Wipe any spillage as soon as possible.
• Clean the hob top as regularly as possible, this
will prevent any build up of grease which may
be a fire hazard.
• Foods with high sugar content (toffee, fruit
juice, jam, etc.) that boil over while cooking, or
spattered sugar stains must be immediately
removed using a scraper even if hot.
• Do not use abrasive products, bleach, hob
cleaner spray or pan scourers.
_ 13
User manual LAM1748

No shelf or overhang of combustible material should be closer than 650mm directly above the hob.
There must be a minimum clearance of 50mm between the rear edge of the hob and the rear wall. This
clearance must be maintained up to 650mm above the worktop (unless otherwise stated in your extractor
manual).
Apply the self adhesive seal around the perimeter of the worktop cut-out. For best results, the seal should
be adhered along each side in turn, as close to the edge as possible, and trimmed at each corner, taking
care to ensure a neat join.
14_
Clearances and dimensions requirements
LAMONA Appliances
Installation
268mm
+1
50mm
400mm min
490mm
+1
*
Minimum height to extractor
asrecommend in extractor
instruction manual
*
60mm
100mm
Min distance between
cabinets must be
equal to the overall
width of all hobs

_15
Installation above an oven
If the appliance is installed with an oven
underneath, please leave at least 15mm of
ventilation, unless otherwise stated in your oven
installation guidelines.
Installing the product - Self adhesive seal
Turn the hob underside down, place it on a
.ecafrusdetcetorptalf
Apply the self adhesive seal to the
underside edges of the hob glass. For best
results, the seal should be adhered along
each side in turn, as close to the edge as
possible, and trimmed at each corner, taking
care to ensure a neat join.
DO NOT ehtrednutnalaesenocilistif
glass hob instead of the self-adhesive seal.
Worktop
15mm
Oven
Hob
5mm
User manual LAM1748
Before installation
The product should only be installed by suitably
.snosrepdeifilauq
The product must be installed in accordance
with all local regulations.
Prior to installation, visually check the product
for any damage/defects. Do not install if any issues
are found.
Damaged products may cause risks to your own
safety.
The appliance is intended for installation in
Installation
Howdens kitchen cabinets.
• Surfaces, synthetic laminates and adhesives
used must be heat resistant.
.dexifdnaleveltesebtsumstenibacnehctiK•
• If there is a drawer beneath the oven, a shelf
must be installed between oven and drawer.
• The following installation drawings are
representational and may not match exactly
with your appliance.
If the installation is n
Gently insert hob into cut out, allowing clips to
hold the hob in place.
ot above an oven and the
underside of the hob is accessible, a wooden shield
is required to be installed at least 15mm below the
underside of the hob unit.
15 min.
DO NOT connect more than 1 x hob into a double pole
switched outlet.

LAMONA Appliances
16_
Electrical Connections
IMPORTANT: Ensure that the electricity supply is switched off before connecting. Your hob is
intended for permanent installation.
teltuodehctiwselopelbuodafoesuehtaivgniriwdexifotdetcennocebtsumecnailpparuoY
with at least 3mm contact separation. The isolation switch must be accessible after installation (see
technical data for fuse rating). We recommend the use of an RCD device as additional protection.
ehtforebmemasiohwnacirtceledeifilauqaybdetcennocsiecnailppaehtdnemmocerylgnortseW
N.I.C.E.I.C who will comply with the I.E.E and any local regulations.
The terminology DOUBLE POLE -/+ means that both the live and neutral supplies are switched and
disconnected at the same time.
The terminations labelled SUPPLY are connections for the internal house wiring and the terminations
labelled LOAD are for connection to the appliance.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:-
Blue........ Neutral
Brown......Live
Green and Yellow.....Earth
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your spur box, proceed as follows;
The wire which is coloured blue must be connected to the terminal which is marked with the letter ‘4’ or .
coloured ‘BLACK’.The wire which coloured brown must be connected to the terminal which is marked with
the letter ‘2’ or coloured ‘RED’ . The green and yellow earth ‘E’ should be connected to the terminal marked
with the following symbol .
‘ ’
N
L
L
N
LOAD
SUPPLY
LOAD
SUPPLY
DP
250V~
Blue.
(Neutral)
Brown.
(Live)
Green / Yellow.
(Earth)
DO NOT connect more than 1 x hob into a double pole switched outlet

User manual LAM1748
_17
The appliance may be connected to the mains supply only by a competent person.
The mains lead must not be clamped, bent, trapped, or come into contact with hot parts of the appliance.
If the mains lead is damaged, it must be replaced by a qualified person (mains cable must not be
longer than 2m for safety reasons). It should be routed away from the appliance and not trapped between
the appliance and the wall.
Technical Data
Outer Dimensions
mm882htdiW
Depth 510mm
mm55thgieH
Cutout Dimensions
)1+(mm862htdiW
Depth 490mm (+1)
Cook Zones
Hob Wattage-Front Ø140-1200w
Hob Wattage-Rear Ø180-1800w
W0003rewoPcirtcelElatoT
zH05~V042-V022egatloVylppuS
)m2xaM(eroc3,²mm5.12V2V5OHepyTelbaC
L N
Terminal
Live: Brown
Earth: Green /
Neutral :
Cable clamp

_ 18
Troubleshooting
LAMONA Appliances
Product or pans emit metal noises while heating and cooling.
• When the metal parts are heated, they may expand and cause noise.
>>> This is not a fault.
Product makes clicking noise when operating.
• This is the electronic controls working.
>>> This is not a fault.
Product does not operate.
• The mains fuse is defective or has tripped.
>>> Check fuses in the fuse box. If necessary, replace or reset them.
• Hob appears to be locked or not responding properly to the controls
>>> Power off the appliance at the switched outlet or circuit breaker.
Wait 20 seconds and then reconnect it.
If this does not cure the problem please call the Service Line.

User manual LAM1748
19_
Your guarantee
Product Guarantee Details (UK only)
Your appliance has the benefit of a comprehensive manufacturer’s guarantee which covers the cost of
breakdown repairs. (Details of which are shown on your Proof of Purchase Document).
• Any claim during the period of the guarantee (MUST BE ACCOMPANIED BY THE PROOF OF PURCHASE)
• The product must be correctly installed and operated in accordance with the manufacturer’s
instructions and used for normal domestic purposes.
• This guarantee does not cover accidental damage, misuse or alternations which are likely to affect the
product.
• The guarantee is invalid if the product is tampered with, or repaired by any unauthorised person.
(The guarantee in no way affects your statutory or legal rights)
What to do if you need to report a problem-
Please ensure you have ready:
• The product’s model and serial numbers
• Howdens Proof of Purchase document
• Your full contact details
Call the Depot number on your Proof of Purchase Document supplied
with the product / kitchen.
Or
Call the LAMONA Service Line on 0344 460 0006
* Product installed within a domestic kitchen or non-domestic kitchen where 8 or fewer people are
using the appliance.
ledomehtdnifoterehW
and serial number on
your machine.
On the base of the hob
LAMONA Appliances