Lamona LAM1216 Guide

Electric Solid Plate Hob LAM1216
Instructions and Installation
www.howdens.com/appliance-registration

See back page for product serial number

_ 03
User manual LAM1216
Dear Customer,
Congratulations on your choice of hob.
The user manual will help you use your product quickly and safely.
• Please read this user manual before installing and using the hob.
• Always follow the safety instructions.
• Keep this user manual within easy reach for future reference.
• Please read any other documents supplied with the product.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful tips about usage.
Warning for possible hazards to health and property.
Warning possibility of electric shock.
Warning of risk of fire.
Warning of hot surfaces.
Product information correct at the time of publication in January 2019.
The company has a policy of continuous product development and reserves the right to change
any products and specifications given in this manual.
The appliance is marked according to the European Directive 2012/19/EU on waste Electrical
and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly you will
help prevent potential negative consequences for the environment and human health. The
symbol on this product indicates that this product may not be treated as household waste.
Instead it should be handed over to the applicable collection point for recycling of electronic
equipment. Disposal must be carried out in accordance with local environmental regulations
for waste disposal. For more detailed information please contact your local council household
waste site.

04_
LAMONA Appliances
Index
Index
01 - Before using the hob 05
02 - Safety 05
General safety 05
Electrical safety 06
Product safety 07-08
Intended use 08
Safety for children 08
03 - Using your hob 09
Controls 09
Hob layout 10
04 - Cleaning and maintenance 11
How to clean your hob 11
05 - Installation 11
General information 11
Positioning 11
Protecting the hob cut out 11
Clearances and dimensions
requirements 12-13
Connect to the electricity supply 14-15
Technical data 15
06 - Your guarantee 16

_ 05
User manual LAM1216
Before Using the hob
• Make sure that you have removed all packaging, wrappings, stickers and films from the hob
surface.
• It is recommended that you clean and wash the hob surface before using for the first time (see
p11).
01 - Before using the hob
This appliance is for
domestic cooking purposes
only. It must not be used for
other purposes, for example
room heating.
General safety
This appliance can be
used by children aged from 8
years and above and persons
with reduced physical,
sensory or mental capabilities
or lack of experience and
knowledge if they have
been given supervision or
instruction concerning use of
the appliance in a safe way
and understand the hazards
involved.
Children shall not play with
the appliance. Cleaning and
user maintenance shall not
be made by children without
supervision.
• The appliance is not to be
used by persons (including
02 - Safety children) with reduced
physical, sensory or mental
capabilities, or lack of
experience and knowledge,
unless they have been given
supervision or instruction.
Children being supervised
not to play with the
appliance.
• If the product is handed
over to someone else for
personal use or second
hand use purposes, theuser
manual, product labels and
other relevant documents
and parts should be also
given.
• Installation and repair
procedures must always be
performed by Authorised
Service Agents. The
manufacturer shall not
be held responsible for
damages arising from
procedures carried out by
unauthorised persons which
may also void the warranty.
Before installation, read the
instructions carefully.

06_
LAMONA Appliances
• Do not operate the product
if it is defective or has any
visible damage.
• Ensure that the product
function knobs are switched
o after every use.
Electrical safety
• If the product has a failure, it
should not be operated unless
it is repaired by an Authorised
Service Agent. There is the
risk of electric shock!
• Only connect the product to
a grounded outlet/line with
the voltage and protection as
specified in the “Technical
specifications”. Have the
grounding installation
made by a qualified
electrician while using the
product with or without a
transformer. Our company
shall not be liable for any
problems arising due to the
product not being earthed
in accordance with the local
regulations.
NEVER wash the product
by spreading or pouring water
onto it! There is the risk of
electric shock!
• The product must be
disconnected during
installation, maintenance,
cleaning and repairing
procedures.
• If the power connection
cable for the product is
damaged, it must be replaced
by the manufacturer, its
service agent or similarly
qualified persons in order to
avoid a hazard.
• Only use the connection
cable cable specified in the
“Technical specifications”.
• The appliance must be
installed so that it can be
completely disconnected
from the mains supply. The
separation must be
provided by a switch built
into the fixed electrical
installation, according to
construction regulations.
• Any work on electrical
equipment and systems
should only be carried
out by authorised and
qualified persons.
• In case of any damage,
switch o the product and
disconnect it from the mains.
• Make sure that fuse rating

_ 07
User manual LAM1216
Safety
is compatible with the
product. To do this, turn o
the fuse at home.
Product Safety
WARNING: The appliance
and its accessible parts
become hot during use. Care
should be taken to avoid
touching heating elements.
Children less than 8 years of
age shall be kept away unless
continuously supervised.
• Never use the product
when your judgment or
coordination is impaired by
the use of alcohol and/or
drugs.
• Be careful when using
alcoholic drinks in your
dishes. Alcohol evaporates at
high temperatures and may
cause fire since it can ignite
when it comes into contact
with hot surfaces.
• Do not place any flammable
materials close to the product
as the sides may become hot
during use.
• Keep all ventilation slots
clear of obstructions.
• Do not use steam cleaners
to clean the appliance as this
may cause an electric shock.
WARNING: Unattended
cooking on a hob with fat or
oil can be dangerous and
may result in fire.
NEVER try to extinguish
a fire with water, but switch
o the appliance and then
cover flame e.g. with a lid or
a fire blanket.
CAUTION: The cooking
process has to be
supervised. A short term
cooking process has to be
supervised continuously.
WARNING: Danger of
fire: Do not store items on
the cooking surfaces.
• The appliance is not
intended to be operated by
means of an external timer
or separate remote control
system
WARNING: Use only
hob guards designed by the
manufacturer of the cooking
appliance or indicated by the
manufacturer of the
in the instructions for use
as suitable or hob guards
incorporated in the
appliance.

08_
LAMONA Appliances
The use of inappropriate
guards can cause accidents.
Prevention against possible
fire risk!
• Ensure all electrical
connections are secure and
tight to prevent risk of arcing.
• Do not use damaged cables
or extension cables.
• Ensure liquid or moisture is
not accessible to the
electrical connection point.
Intended use
• This product is designed for
domestic use. Commercial
use will void the guarantee.
• This appliance is for cooking
purposes only. It must not be
used for other purposes, for
example room heating.
• The manufacturer shall
not be liable for any damage
caused by improper use or
handling errors.
Safety for children
WARNING: Accessible
parts may become hot during
use. Young children should be
kept away.
• The packaging materials
will be dangerous for
children. Keep the packaging
materials away from
children. Please dispose of
all parts of the packaging
according to environmental
standards.
• Electrical products are
dangerous to children. Keep
children away from the
product when it is operating
and do not allow them to
play with the product.
• Do not place any items
above the appliance that
children may reach for.

_ 09
User manual LAM1216
Do not use the hob if the surface is cracked,
as electrical parts are directly beneath. Switch
o the appliance at the supply to prevent
electric shock and contact your supplier.
The hob surface remains hot after use.
DO NOT TOUCH.
The appliance is not intended to be operated
by means of an external timer or separate
control system.
Controls
Rotate in either direction to switch on and
select the heat level. Each zone has 6 fixed heat
settings as described in the heat settings table.
03 - Using the hob
Using the hob
Heat Settings
1 2 - 3 4 - 5 - 6
Warming Simmering &
Stewing
Frying &
Boiling
When any one of the heating zones is on, the red
indicator light on the control panel lights up.
2
3 4
5
6
0
1
2
3 4
5
6
0
1
2
3 4
5
6
0
1
2
4
5
6
0
1
3
To switch a heating zone o turn the
corresponding knob to ‘0’ (zero)
2
4
5
6
0
1
3

10_
LAMONA Appliances
Hob layout
2
3 4
5
6
0
1
2
3 4
5
6
0
1
2
3 4
5
6
0
1
2
4
5
6
0
1
3
a.
b.
c.
d.
e.
h.
f.
g.
i.
Using the hob
a. Rear Left Zone (Rapid) Ø145mm 1500w
Suitable for 6” or 15cm diameter saucepan
b. Rear Right Zone (Standard) Ø180mm 1500w
Suitable for 7” or 18cm diameter saucepan
c. Front Left Zone (Rapid) Ø180mm 2000w
Suitable for 7” or 18cm diameter saucepan
d. Front Right Zone (Rapid) Ø145mm 1500w
Suitable for 6” or 15cm diameter saucepan
e. Rear right control Knob
f. Rear left control Knob
g. Front left control Knob
h. Front right control Knob
i. Hob on Indicator.
Over heating protection
Hotplates that have a power above 1000W are equipped with over heating protection.
This protection decreases the power of the hotplate in the following conditions:
• There is no saucepan or vessel on the hotplate.
• There is an empty saucepan or vessel on the hotplate.
• The bottom of the saucepan or vessel is not completely flat.

_ 11
User manual LAM1216
04 - Cleaning & maintenance
How to clean your hob
• Switch plates o and let cool. If necessary,
treat plates with a cleaning agent (cleaner/
conditioner available in selected stores).
• Dry by switching on for a few minutes.
• The hob can be cleaned using a clean damp
cloth or kitchen paper. Do not use a dish
cloth or sponge as these can leave a film of
detergent on the surface which can lead to
discolouration.
• Apply a thin coat of cooking oil from time to
time to provide a protective coating.
• Do not use steam cleaners or high pressure
cleaning equipment.
• Wipe any spillage as soon as possible after
the hob has cooled.
• Clean the hob top as regularly as possible,
this will prevent any build up of grease
which may be a fire hazard.
• Do not use abrasive products, bleach, hob
cleaner spray or pan scourers.
Cleaning and maintenance
05 - Installation
General information
Installation must only be carried out by a
qualified installer or engineer.
Please Note:
Although every care has been taken to ensure
this appliance has no burrs, or sharp edges, We
recommend that you wear protective gloves
when installing and moving this appliance. This
will prevent injury.
The hob should not be fitted above a washing
machine, a fridge or a freezer. Wall surfaces
above the work surface and in the immediate
vicinity of the cooking hob must be heat
resistant.
Laminated surfaces and the adhesive used for
fixing them must be heat resistant in order to
avoid any damage.
Installations should be carried out in line with
the National Regulations applicable with this
product type.
Positioning
The hob is designed to be built into a work top as
detailed in the image.
Aperture width 560mm x depth 490mm
Protecting the hob cut-out
The types of chipboard used for work surfaces
swell relatively quickly in contact with humidity.
Apply a special varnish or adhesive to the cut edge
to protect and seal it from moisture ingress.

12_
LAMONA Appliances
Installation
Clearances and dimensions requirements
560mm
50mm Min
55mm min
400mm min
490mm
Minimum distance
between carcasses must
be equal to width of hob
*
Minimum height to extractor
as recommend in extractor
instruction manual
*
50mm min between hob and rear wall
(>60mm to cut out aperture)
No shelf or overhang of combustible material should be closer than 650mm directly above the
hob.
There must be a minimum clearance of 50mm between the rear edge of the hob and the rear wall.
This clearance must be maintained up to 650mm above the worktop (unless otherwise stated in
your extractor manual).
Place the hob in the aperture, checking the hob is covering the worktop along all four sides. Set the
front edge of the appliance parallel with the front of the worktop.
Secure the hob to the worktop by means of the brackets provided, taking the thickness of the
worktop into account. Your appliance will be supplied and installed using the following installation
method.

_ 13
User manual LAM1216
Method 1
The brackets screw directly into the base of the
hob in the positions shown
40mm Hob
Worktop
Screw
50mm Hob
Worktop
Screw
30mm Hob
Worktop
Screw
Worktop
25mm
oven or partition
Hob
5mm
Installation above an oven
If the appliance is installed with an oven
underneath, please leave at least 15mm of
ventilation, unless otherwise stated in your oven
installation guidelines.
WARNING RISK OF FIRE
The putty seal must be fitted to reduce the
heat transfer between the hob surface and the
worktop. Failure may result in damage to the
worktop and invalidate your guarantee.
Apply a thin bead of the putty seal
(provided) to the underside of the hob.
For best results ensure the putty is applied
evenly, as close to the edge as possible and only
use the necessary amount. Once in position, trim
any access putty away with a blunt knife taking
care not the damage the worktop.
Installation
Putty Seal
Worktop
15mm
oven or partition
Hob
5mm

14_
LAMONA Appliances
Electrical connections
IMPORTANT: Ensure that the electricity supply is switched off before connecting. Your extractor is
intended for permanent installation.
Your appliance must be connected to fixed wiring via the use of a double pole switched fused
spur outlet with at least 3mm contact separation. The isolation switch must be accessible after
installation (see technical data for fuse rating). We recommend the use of an RCD device as
additional protection.
The product must only be installed by a suitably qualified person. The product must be installed in
accordance with all local regulations.
The terminology DOUBLE POLE -/+ means that both the live and neutral supplies are switched and
disconnected at the same time.
The terminations labelled SUPPLY are connections for the internal house wiring and the
terminations labelled LOAD are for connection to the appliance.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:-
Blue........ Neutral
Brown......Live
Green and Yellow.....Earth
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your spur box, proceed as follows;
The wire which is coloured blue must be connected to the terminal which is marked with the letter
‘N’ or coloured ‘BLACK’. The wire which coloured brown must be connected to the terminal which is
marked with the letter ‘L’ or coloured RED. The green and yellow earth ‘E’ should be connected to the
terminal marked with the following symbol:
N
L
L
N
LOAD
SUPPLY
LOAD
SUPPLY
DP 250V~
Blue.
(Neutral)
Brown.
(Live)
Green / Yellow.
(Earth)

_ 15
User manual LAM1216
Technical data
Outer Dimensions
Width 580mm
Depth 510mm
Height 58mm
Cutout Dimensions
Width 560mm
Depth 490mm
Cook Zones
Rear Left Zone (Rapid) Ø145mm 1500w
Rear Right Zone (Standard) Ø180mm 1500w
Front Left Zone (Rapid) Ø180mm 2000w
Front Right Zone (Rapid) Ø145mm 1500w
Supply Information
Total Electric Power 6500W
Supply Voltage 220-240V~50Hz
Cable Type HO5V2V2 2.5mm²
The appliance must be connected to the mains supply only by a competent person.
The mains lead must not be clamped, bent, trapped, or come into contact with hot parts of the
appliance.
If the mains lead is damaged, it must be replaced by a qualified person (mains cable must not
be longer than 2m for safety reasons). It should be routed away from the appliance and not trapped
between the appliance and the wall.
Your appliance is fitted with a mains cable, if you need to replace it or rewire for fitting on a
European 2 phase supply, remove the cable and rewire as shown in the diagram below.
Installation
Earth (Yellow/Green)
Neutral (Blue)
L1 (Black)
L2 (Grey)
L1
L2 3
2
1
4
Mains Cable
5 x 1.5 mm² 400v 2N
Earth (Yellow/Green)
Neutral (Blue)
L (Black/Grey)
L
L3
2
1
4
Mains Cable
5 x 1.5 mm² 230v
European Connections
Brown
(Live)
Blue
(Neutral)
Green/Yellow
(Earth)

16_
LAMONA Appliances
Your guarantee
06 - Your guarantee
Product guarantee details (UK only)
Your appliance has the benefit of a comprehensive manufacturer’s guarantee which covers the
cost of breakdown repairs. (Details of which are shown on your Proof of Purchase Document).
• Any claim during the period of the guarantee (MUST BE ACCOMPANIED BY THE PROOF OF
PURCHASE)
• The product must be correctly installed and operated in accordance with the manufacturer’s
instructions and used for normal domestic purposes.
• This guarantee does not cover accidental damage, misuse or alternations which are likely to
aect the product.
• The guarantee is invalid if the product is tampered with, or repaired by any unauthorised
person.
(The guarantee in no way aects your statutory or legal rights)
What to do if you need to report a problem-
Please ensure you have ready:
• The product’s model and serial numbers
• Howdens Proof of Purchase document
• Your full contact details
Call the Depot number on your Proof of Purchase Document
supplied with the product / kitchen.
Or
Call the LAMONA Service Line on 0344 460 0006
* Product installed within a domestic kitchen or non-domestic kitchen where 8 or fewer people are
using the appliance.
Where to find the
model and serial
number on your
machine.
On the base of the hob

Product serial number
(Place sticker here)
Issue v2 140119
185.9282.21/R.AA/24/01/2019