Lamona LAM4406 User manual

pany to ensure compliance with their
regulations.
•The appliance socket switch should be
outside the cabinet but within 2 m of
the appliance to make it accessible to
switch off the appliance in case of an
emergency.
• To protect the hands, wear gloves
when lifting the oven into its housing.
HOUSE CIRCUIT
Earth leakage and continuity tests
must be carried out before the ap-
pliance is connected to the mains
supply and re-checked after fit-
ting.
GETTING THINGS READY
CHOICE OF ELECTRICAL
CONNECTION
There are three possible ways to connect
your appliance. In each case the appli-
ance should be operated using at least 6
mm² twin core and earth PVC insulated
multicore cable. Please choose from the
most appropriate after reading the differ-
ent methods :
a) By connecting to a cooker point (hav-
ing a double pole isolating switch with
at least 3 mm contact separation in all
poles and neutral) and protected with
a fuse or miniature circuit breaker at
your mains fuse box.
b) By connecting the appliance together
with a hob directly to a cooker point(s).
Having a double pole isolating switch
with at least 3 mm contact separation
in all poles and neutral.
c) If you wish to connect an oven and a
hob to a cooker point you can by con-
necting the oven and hob separately
to the cooker point. Oven and hob
units should be separately connected
to a cooker point. (See Picture)
A
BC
A) Cooker Point
B) Hob
C) Oven
It is good practice to :
– Fit an Earth Leakage Circuit
Breaker to your house wiring.
–Wire your appliance to the latest
IEE regulations.
Electrical Installation
•Enquiries regarding the installation of
the cooker point, if required, should be
made to your Regional Electricity Com-

2
550
600-605
720
100
7
594
547 21
538
708
707
715
8
2x
16x
2x 3,5x25
4x12
2x
550
600-605
720
100
7
594
547 21
538
708
707
715
8
2x
16x
2x 3,5x25
4x12
2x
2x3,5x25
867300115-C-062018
1 2
3 4
5 6