Land Pride RTR1042 User manual

96
Rotary Tillers, Reverse Tine Rotation
311-431S continued on next page
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
5/02/07 311-431S continued on next page
RTR10 Series
RTR1042 RTR1050 RTR1058
Width 42” 50” 58”
Overall Width 47 5/16” 55 5/16” 63 5/16”
Weight 403# 430# 474#
Number of flanges 567
Number of Tines per Flange 444
Driveline Category II
Shear bolt - standard
Slip Clutch - optional
Gearbox 25 HP input at 540rpm 1.92:1 ratio
Cast iron housing, straight bevel gears
Gearbox Lubrication SAE 90 oil
Drive Chain #80 roller chain in flowable grease bath
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15”
Rotor Shaft Speed 225 rpm at 540 rpm PTO
Recommended
Maximum PTO HP 25 HP
Hitch Type Category l, offsetable, works with Land Pride Quick-Hitch
(Note: Cannot be offset when using the Quick-Hitch)

97 5/02/07
Rotary Tillers, Reverse Tine Rotation
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
311-431S End
311-431S End
RTR15 Series
Model RTR1550 RTR1558
Width 50” 58”
Overall Width 56 1/4” 64 1/4”
Weight 455# 489#
Number of Flanges 67
Number of Tines per Flange 44
Driveline Category IIl Heavy Duty
Shear bolt - standard
Slip Clutch - optional
Gearbox 35 HP input at 540 rpm 1.92:1 ratio
Cast iron housing, straight bevel gears
Gearbox Lubrication SAE 80-90W EP oil
Drive Chain #80 roller chain in flowable grease bath
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15”
Rotor Shaft Speed 211 rpm at 540 rpm PTO
Recommended
Maximum PTO HP 35 HP
Hitch Type Category l, Sideshift capabilities, works with Land Pride Quick-Hitch
(Note: Sideshift capability also works with Land Pride Quick-Hitch)