Lang TH-SHORTY-150-8 User manual

Important safety notice
Product description
Maximum weight load information
Installing the truss mount
Adjustment options
Dimensions & weight
TH-SHORTY-150-8
INSTALLATION MANUAL
2
3
3
4
4
5
Only a qualied installer should install this product.
Read these instructions carefully before installing this product.
The frames and projectors shown in the pictures of this manual only serve as an example.
The design of the frame and projector you are using may vary.
These installation instructions must always be handed over to the installing person.
for frames:
Epson ELPMB50
Epson ELPMB51
Epson EB-L25000
Panasonic ET-RFD21
Panasonic FRAME-PF-PAN-21K
Panasonic ET-RFD91 / ET-RFD91-li
Panasonic FRAME-PF-PAN-13K

Important safety notice
Product description
Maximum weight load information
Installing the truss mount
Adjustment options
Dimensions & weight
IMPORTANT SAFETY NOTICE
Dear customer:
Thank you for choosing the TH-SHORTY-150-8 truss mount.
This instruction booklet provides you with all the necessary operating information
that you may require. It will help you to get the best performance out of this new
product. We hope you will be pleased with your truss mount.
Model number: TH-SHORTY-150-8
SAFETY PRECAUTIONS
Please consider the valid laws at the place of event.
WARNING
Installation work should only be carried out by a qualied technician.
- If this product is not installed correctly, serious accidents may result.
The maximum weight load for one TH-SHORTY-150-8 is 150 kg (330,69 lbs)
- Do not exceed the maximum weight load in ceiling mount congurations.
CAUTION
Do not install the truss mount and suspend the frame in a place
which may impede projector ventilation.
-If this is not observed, re may result.
Do not set up the projector in humid or dusty places or in places where the projector may
come into contact with oily smoke or steam.
-Using the projector under such conditions may result in re, electric shocks or plastic deterioration.
Minimum 2 people are required to install a frame with the TH-SHORTY-150-8.
- With regard to the overall weight of all necessary installation devices, make sure to handle
those with at least 2 people.
2.

Max. stacking possibilities for ceiling mounts using
the following frames with correspondent projectors:
PRODUCT DESCRIPTION
Truss mount Used for ceiling
mount installations
MAXIMUM WEIGHT LOAD INFORMATION
Purpose Finished assembly diagramImagePart name
3.
Truss mount
TH-SHORTY-150-8
Epson EB-L25000 Frame
Epson ELPMB51
Panasonic ET-RFD21
Panasonic FRAME-PF-PAN-21K
Panasonic FRAME-PF-PAN-13K
Epson ELPMB50
Panasonic ET-RFD91 / ET-RFD91-li

INSTALLING THE TRUSS MOUNT
Place the truss mount on the rear side
of the frame. Make sure that the 4 screws
enter the 4 holes in the frame. Tighten
the screws to secure the truss mount on
the frame.
ADJUSTMENT OPTIONS
4.
By means of the 4 adjustment screws,
the positon of the mount can be dened
very precisely.
ne adjustment screws
When turning the handle on the truss mount,
it becomes mobile and can be rotated by 360°.
handle
360°
The inclination angle can be adjusted by 10% at the
upper part (rough adjustment) and by 2% at the
lower part (ne adjustment).

5.
DIMENSIONS & WEIGHT
ø159 mm / 6.26 inches
164. 7 mm / 6.48 inches
250. 2 mm / 9.85 inches
284 mm / 11.18 inches
Weight: 8,80 kg

Made in Germany
for
by Sager Metallbearbeitung
www.lang-ag.com
03/17