Lanner NCA-1513 User manual

NCA-1513 User Manual
1
NCA-1513
User Manual
Version: 1.0
Date of Release:2019-12-26
Network Appliance
Platform
Hardware Platforms for Network Computing

2
About this Document
This manual describes the overview of the various functionalities of this product and the information you
need to get it ready for operation. It is intended for those who are:
-responsible for installing, administering and troubleshooting this system or information technology
professionals.
-assumed to be qualified in the servicing of computer equipment, such as professional system
integrators, or service personnel and technicians.
The latest version of this document can be found on Lanner’s official website, available either
through the product page or through the Lanner Download Center page with a login account and
password.
Conventions & Icons
This document utilizes different font types and icons in order to make the selected text more transparent
and explicable to users. This document contains the following conventions:
Font Conventions
Example
Convention
Usage
iptables –F Monospace, shaded
A command to be entered at a shell
command-line
Setup page
Bold
A title of a dialog box or a page
<Enter>
Between a pair of inequality signs
A physical keyboard button
“Menu”Between a pair of quotation marks
A menu option or a software button to be
clicked
Readme.txt
In Italic
A filename or a file path
IPMI User Guide Underlined
The name of another document or a chapter
in this document
Icon Descriptions
Icon
Usage
This mark indicates that there is something you should pay special
attention to while using the product.
This mark indicates that there is a caution or warning and it is
something that could damage your property or product.
Online Resources
To obtain additional documentation resources and software updates for your system, please visit the
Lanner Download Center. As certain categories of documents are only available to users who are logged in,
please be registered for a Lanner Account at http://www.lannerinc.com/ to access published
documents and downloadable resources.
For troubleshooting the issues with your system, please visit the Lanner Q&A page for diagnostic
procedures and troubleshooting steps.
Note or Information
Warning or Important

NCA-1513 User Manual
3
Technical Support
In addition to contacting your distributor or sales representative, you could submit a request to our Lanner
Technical Support at http://www.lannerinc.com/technical-support where you can fill in a support ticket to
our technical support department.
Copyright and Trademarks
This document is copyrighted © 2019 by Lanner Electronics Inc. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described in this manual at any
time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third
parties that may result from such use.
Documentation Feedback
Your feedback is valuable to us, as it will help us continue to provide you with more accurate and relevant
documentation. To provide any feedback, comments or to report an error, please email
[e-mail]. Thank you for your time.

4
Contact Information
Acknowledgment
Intel® and Intel® Atom® are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other
countries.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Taiwan Corporate Headquarters
Lanner Electronics Inc.
7F, No.173, Sec.2, Datong Rd. Xizhi District,
New Taipei City 22184, Taiwan
立端科技股份有限公司
221 新北市汐止區
大同路二段 173 號 7 樓
T: [phone]
F: [phone]
E: [e-mail]
China
Beijing L&S Lancom Platform Tech. Co., Ltd.
Guodong LOFT 9 Layer
No. 9 Huinan Road,
Huilongguan Town, Changping District, Beijing
102208 China
T: [phone]
F: [phone]
E: [e-mail]
USA
Lanner Electronics Inc.
47790 Westinghouse Drive Fremont, CA 94539
T: [phone]
F: [phone]
E: [e-mail]
Canada
LEI Technology Canada Ltd
3160A Orlando Drive Mississauga, ON L4V 1R5
Canada
T: [phone]
F: [phone]
E: [e-mail]

NCA-1513 User Manual
5
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Note
1. An unshielded-type power cord is required in order to meet FCC emission limits and also to prevent interference
to the nearby radio and television reception. It is essential that only the supplied power cord be used.
2. Use only shielded cables to connect I/O devices to this equipment.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Important
1. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
2. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

6
Safety Guidelines
Follow these guidelines to ensure general safety:
Keep the chassis area clear and dust-free during and after installation.
Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and
roll up your sleeves.
Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Disconnect all power by turning off the power and unplugging the power cord before installing or
removing a chassis or working near power supplies
Do not work alone if potentially hazardous conditions exist.
Never assume that power is disconnected from a circuit; always check the circuit.
Consignes de sécurité
Suivez ces consignes pour assurer la sécurité générale :
Laissez la zone du châssis propre et sans poussière pendant et après l’installation.
Ne portez pas de vêtements amples ou de bijoux qui pourraient être pris dans le châssis. Attachez votre
cravate ou écharpe et remontez vos manches.
Portez des lunettes de sécurité pour protéger vos yeux.
N’effectuez aucune action qui pourrait créer un danger pour d’autres ou rendre l’équipement
dangereux.
Coupez complètement l’alimentation en éteignant l’alimentation et en débranchant le cordon
d’alimentation avant d’installer ou de retirer un châssis ou de travailler à proximité de sources
d’alimentation.
Ne travaillez pas seul si des conditions dangereuses sont présentes.
Ne considérez jamais que l’alimentation est coupée d’un circuit, vérifiez toujours le circuit. Cet appareil
génère, utilise et émet une énergie radiofréquence et, s’il n’est pas installé et utilisé conformément aux
instructions des fournisseurs de composants sans fil, il risque de provoquer des interférences dans les
communications radio.
Lithium Battery Caution
There is risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Installation should be conducted only by a trained electrician or only by an electrically trained person
who knows all installation procedures and device specifications that are to be applied.
Do not carry the handle of power supplies when moving to another place.
Please conform to your local laws and regulations regarding safe disposal of lithium battery.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in
an explosion.
Leaving a battery in an extremely high temperature environment can result in an explosion or the
leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable
liquid or gas.
Avertissement concernant la pile au lithium
Risque d’explosion si la pile est remplacée par une autre d’un mauvais type.
Jetez les piles usagées conformément aux instructions.
L’installation doit être effectuée par un électricien formé ou une personne formée à l’électricité
connaissant toutes les spécifications d’installation et d’appareil du produit.
Ne transportez pas l’unité en la tenant par le câble d’alimentation lorsque vous déplacez l’appareil.

NCA-1513 User Manual
7
Operating Safety
Electrical equipment generates heat. Ambient air temperature may not be adequate to cool equipment
to acceptable operating temperatures without adequate circulation. Be sure that the room in which you
choose to operate your system has adequate air circulation.
Ensure that the chassis cover is secure. The chassis design allows cooling air to circulate effectively. An
open chassis permits air leaks, which may interrupt and redirect the flow of cooling air from internal
components.
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs
when electronic components are improperly handled and can result in complete or intermittent failures.
Be sure to follow ESD-prevention procedures when removing and replacing components to avoid these
problems.
Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. If no wrist strap is
available, ground yourself by touching the metal part of the chassis.
Periodically check the resistance value of the antistatic strap, which should be between 1 and 10
megohms (Mohms).
Sécurité de fonctionnement
L’équipement électrique génère de la chaleur. La température ambiante peut ne pas être adéquate pour
refroidir l’équipement à une température de fonctionnement acceptable sans circulation adaptée.
Vérifiez que votre site propose une circulation d’air adéquate.
Vérifiez que le couvercle du châssis est bien fixé. La conception du châssis permet à l’air de
refroidissement de bien circuler. Un châssis ouvert laisse l’air s’échapper, ce qui peut interrompre et
rediriger le flux d’air frais destiné aux composants internes.
Les décharges électrostatiques (ESD) peuvent endommager l’équipement et gêner les circuits
électriques. Des dégâts d’ESD surviennent lorsque des composants électroniques sont mal manipulés et
peuvent causer des pannes totales ou intermittentes. Suivez les procédures de prévention d’ESD lors du
retrait et du remplacement de composants.
Portez un bracelet anti-ESD et veillez à ce qu’il soit bien au contact de la peau. Si aucun bracelet n’est
disponible, reliez votre corps à la terre en touchant la partie métallique du châssis.
Vérifiez régulièrement la valeur de résistance du bracelet antistatique, qui doit être comprise entre 1 et
10 mégohms (Mohms).
Mounting Installation Precautions
The following should be put into consideration for rack-mount or similar mounting installations:
Do not install and/or operate this unit in any place that flammable objects are stored or used in.
The installation of this product must be performed by trained specialists; otherwise, a non-specialist
might create the risk of the system’s falling to the ground or other damages.
Lanner Electronics Inc. shall not be held liable for any losses resulting from insufficient strength for
supporting the system or use of inappropriate installation components.
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient. Therefore, consideration
should be given to installing the equipment in an environment compatible with the maximum ambient
temperature (Tma) specified by the manufacturer.
Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of airflow
required for safe operation of the equipment is not compromised.
Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition
is not achieved due to uneven mechanical loading.
Circuit Overloading - Consideration should be given to the connection of the equipment to the supply
circuit and the effect that overloading of the circuits might have on overcurrent protection and supply
wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this
concern.
Reliable Grounding - Reliable grounding of rack-mounted equipment should be maintained. Particular

8
attention should be given to supply connections other than direct connections to the branch circuit (e.g.,
use of power strips).
Electrical Safety Instructions
Before turning on the device, ground the grounding cable of the equipment. Proper grounding
(grounding) is very important to protect the equipment against the harmful effects of external noise and to
reduce the risk of electrocution in the event of a lightning strike. To uninstall the equipment, disconnect
the ground wire after turning off the power. A ground wire is required and the part connecting the
conductor must be greater than 4 mm2 or 10 AWG.
Consignes de sécurité électrique
Avant d’allumer l’appareil, reliez le câble de mise à la terre de l’équipement à la terre.
Une bonne mise à la terre (connexion à la terre) est très importante pour protéger l’équipement contre
les effets néfastes du bruit externe et réduire les risques d’électrocution en cas de foudre.
Pour désinstaller l’équipement, débranchez le câble de mise à la terre après avoir éteint l’appareil.
Un câble de mise à la terre est requis et la zone reliant les sections du conducteur doit faire plus de 4
mm2 ou 10 AWG.
Grounding Procedure for DC Power Source
Loosen the screw of the earthing point.
Connect the grounding cable to the ground.
The protection device for the DC power source must provide 30
A current.
This protection device must be connected to the power source
before DC power.
Procédure de mise à la terre pour source
d’alimentation CC
Desserrez la vis du terminal de mise à la terre.
Branchez le câble de mise à la terre à la terre.
L’appareil de protection pour la source d’alimentation CC
doit fournir 30 A de courant.
Cet appareil de protection doit être branché à la source
d’alimentation avant l’alimentation CC.

NCA-1513 User Manual
9
This equipment must be grounded. The power cord for product should be connected to a socket-outlet
with earthing connection.
Cet équipement doit être mis à la terre. La fiche d'alimentation doit être connectée à une prise de terre
correctement câblée
Suitable for installation in Information Technology Rooms in accordance with Article 645 of the National
Electrical Code and NFPA 75.
Peut être installé dans des salles de matériel de traitement de l'information conformément à l'article 645
du National Electrical Code et à la NFPA 75.
The machine can only be used in a restricted access location and has installation instructions by a skilled
person (for Fan side).
Les matériels sont destinés à être installés dans des EMPLACEMENTS À ACCÈS RESTREINT.
Instruction for the installation of the conductor to building earth by a skilled person.

10
Table of Contents
Chapter 1: Product Overview .......................................................... 11
Package Content......................................................................................................................... 11
Optional Kits ............................................................................................................................... 11
Ordering Information ................................................................................................................. 11
System Specifications ................................................................................................................. 12
Front Panel ................................................................................................................................. 13
Rear Panel................................................................................................................................... 14
Motherboard Information.......................................................................................................... 15
Chapter 2 Hardware Installation..................................................... 24
Installing Nano SIM Card ............................................................................................................ 25
Mounting an SMA-Mount Antenna Cable Assembly ................................................................. 26
Rack-mounting the System ........................................................................................................ 27
Chapter 3 Software Setup ............................................................... 29
BIOS Setup .................................................................................................................................. 29
Appendix A: LED Indicator Explanations ....................................... 72
Appendix B: Network Interface Renaming..................................... 73
Prerequisite ................................................................................................................................ 73
Description ................................................................................................................................. 73
Config(rnif.conf) ......................................................................................................................... 73
Appendix C: Terms and Conditions ................................................ 78
Warranty Policy .......................................................................................................................... 78
RMA Service................................................................................................................................ 78
RMA Service Request Form ........................................................................................................ 79

NCA-1513 User Manual
11
CHAPTER 1: PRODUCT OVERVIEW
NCA-1513 series is an Intel ATOM based system desktop platform, based on 4-Core CPU with max 6x GbE
copper ports or 4xGbE + 2x SFP ports (by SKU). The system is targeted at low-cost desktop with ECC or
Non-ECC DDR4 memory support.
Package Content
Your package contains the following items:
1 x NCA-1513 series Network Security Platform
1 x Power cord(Default US Type)
1 x 40W power adaptor
1 Accessory Pack including 4 x Rubber foot + 1 x Plastic Spacer +3x Screw
Optional Kits
Ear Bracket with adaptor Holder kit
HDD Kit
WIFI Kit
LTE Kit
Ordering Information
SKU No.
Main Features
NCA-1513A
Atom 4C C3558 w/QAT + 6x GbE RJ45 with 2 pair bypass function
NCA-1513B
Atom 2C C3308 w/QAT+ 6x GbE RJ45 with 2 pair bypass function
NCA-1513C
Atom 2C C3338 w/o QAT + 4x GbE RJ45 without bypass function
NCA-1513D
Atom 4C C3558 w/QAT +2x SFP + 4x GbE RJ45 with 2 pair bypass function
NCA-1513
Power Cord
Power Adapter
Accessory Pack

Chapter 1: Product Overview
12
System Specifications
Form Factor
Desktop
Platform
Processor Options
SKU A/D: Intel Atom C3558, 2.2GHz
SKU B: Intel Atom C3308, 1.6GHz
SKU C: Intel Atom C3338, 1.5GHz
CPU Socket
1x BGA
Chipset
N/A
Security Acceleration
Intel® QuickAssist Technology (SKU A/B/D)
BIOS
AMI SPI Flash BIOS
System Memory
Technology
DDR4 2133MHz ECC / Non-ECC (1866MHz
for C3308/C3338; 2133MHz for C3558)
Max. Capacity
16GB
Socket 1x 260-pin SO-DIMM (one channel one
DIMM )
Networking
Ethernet Ports (By SKU)
SKU A: 6x GbE RJ45 (4x Marvell 88E1543 +
2x Intel i210-AT)
SKU B: 6x GbE RJ45 (4x Marvell 88E1543 +
2x Intel i211-AT)
SKU C: 4x GbE RJ45 (4x Marvell 88E1543)
SKU D: 4x GbE RJ45 + 2x 10G SFP
(4x Marvell 88E1543 +2x Intel i210-IS)
Bypass
SKU A/B/D: 2 pair bypass
NIC Module Slot
N/A
LOM
IO Interface
N/A
OPMA slot
N/A
I/O Interface
Reset Button
1
LED
Power/Status/HDD/LAN
Power Button
1x Power Switch
Console
1x RJ45
USB 2x USB 3.0 or 2x USB 2.0 (by SKU)
LCD Module
N/A
Display
N/A
Power input
12V DC power inlet
Storage
HDD/SSD Support
1x 2.5” HDD/SSD Internal Bays
Onboard Slots
1x M.2 (w/ SATA support)
Expansion
M.2
1x M.2 2280/2242 B Key for storage
1x M.2 3042 (USB3.0) for LTE
mini-PCIe
1x Mini-PCIe (PCIe/USB2.0)
SIM card Slot
1x Nano SIM Slot
Miscellaneous
Watchdog
Yes
Internal RTC with Li Battery
Yes
TPM
Yes (Optional)
Cooling
System
1x system FAN with Smart FAN function
Environmental Parameters
Temperature
0~40ºC Operating
-20~70ºC Non-Operating
Humidity (RH)
5~90% Operating
5~ 95% Non-Operating
System Dimensions
(WxDxH)
231mm x 200mm x 44mm
Weight
TBD
Package Dimensions
(WxDxH)
TBD
Weight
TBD
Power
Type/Watts
12V power connector x1
Input
AC 100-240V~50-60Hz 1.7A
Approvals and Compliance
CE/FCC Class B, EU RoHS 2.0, China RoHS

NCA-1513 User Manual
13
Front Panel
No. Description
F1 SIM Card Slot 1x Nano SIM Slot
F2 LED Indicators
F1
F2
System Power
System Status
HDD Activity
LAN Ports

Chapter 1: Product Overview
14
Rear Panel
No. Description
R1 Power Switch 1x Power Button
R2 Reset Button
For hardware reset
R3 DC Jack 1x DC Power Jack
R4 Console Port 1x RJ45 console port
R5 USB Port 2x USB 3.0 Port or 2x USB 2.0 Port (by SKU)
R6 LAN Port
6x RJ45 Port or 2x SFP Port + 4x RJ45 Port (by SKU)
Port Sequence (from left to right): 213456
For instructions on modifying the port sequence, please refer to
Appendix B: Renaming Network Interface
R7 Antenna Port 4x Reserved antenna port for Wi-Fi / LTE module
R2
R4
R5
R3
R6
R1
R7

NCA-1513 User Manual
15
Motherboard Information
Block Diagram
The block diagram indicates how data flows among components on the motherboard. Please refer to the
following figure for your motherboard’s layout design.

Chapter 1: Product Overview
16
Jumper Setting and Pin Assignment
The motherboard board layout shows the connectors on the board. Refer to the below picture as a
reference of the pin assignments.
F
FA AN N2 2
S
SI IM M2 2
M
MP PC CI IE E1 1
S
SA AT TA A1 1
C
CO ON N1 1
G
GP PI IO O1 1
J
J8 80 0P PO OR RT T1 1
J
JO OP PE EN N1 1
C
CO OM MB B2 2
J
J8 8
C
CO ON N2 2
M
M2 2_ _L LT TE E
M
M2 2_S ST TO OR RA AG GE E
J
JR RT TC C1 1
J
JR RT TC C2 2
B
BA AT T1 1
J
JS SP PI IR RO OM M1 1
S
SW W3 3
S
SW W2 2
J
JR RE ES SE ET T1 1
C
CO ON NN N2 2
D
DD DR R4 4

NCA-1513 User Manual
17
BAT1: RTC Battery connector
PIN Description
1 V_BATTERY
2 GND
COM1: Console port
PIN Description
1 COM1_RTS_N
2 COM1_DTR_N
3 COM1_TXD
4 LGND
5 LGND
6 COM1_RXD
7 COM1_DSR_N
8 COM1_CTS_N
COMB2: Internal COM port for debug
PIN Description PIN Description
1 NDCD2- 2 NDSR2-
3 NRXD2 4 NRTS2-
5 NTXD2 6 NCTS2-
7 NDTR2- 8 NRI2-
9 IOGND2 10 NC
CON1: SATA power connector
PIN Description
1 P12V_SB
2 GND
3 GND
4 P5V_AUX
CON2: Gen3 bypass flash connector
PIN Description
1 P3V3_AUX
2 IO_RXD
3 GND
4 IO_TXD

Chapter 1: Product Overview
18
CONN2: Power pin header
PIN Description
1 GND
2 PWRON#
FAN2: CPU FAN
PIN Description
5 CPUFANOUT
4 NC
3 CPUFANIN
2 P12V_S
1 GND
GPIO1: GPIO connector
PIN Description PIN Description
1 GPO_B_1- 2 GPI_B_1
3 GPO_B_2 4 GPI_B_2
5 GPO_B_3 6 GPI_B_3
7
GPO_B_4-
8
GPI_B_4
9 GND 10 GND
J8: Gen3 bypass flash jumper for ARM Programming Selection
0(2- 3) : Enable
1(1-2) : Disable (default)
PIN Description
1 P3V3_AUX
2 PIO0_1
3 GND
J80PORT1: PORT80 connector
PIN Description PIN Description
1 CLK_LPC_OUT 2 SOC_LPC_LAD1
3 80PORT_RST# 4 SOC_LPC_LAD0
5 SOC_LPC_FRAME_N 6 P3V3_S
7 SOC_LPC_LAD3 8 NC
9 SOC_LPC_LAD2 10 GND

NCA-1513 User Manual
19
JOPEN1: Case open connector
PIN Description
1 SIO_CASEOPEN0_N
2 GND
JRESET1: H/W & S/W Reset
1-2 :Hardware Reset
2-3 :Software Reset (Default)
PIN Description
1 FP_RST_BTN_N
2 GND
3 SW_RST_GP_N
JRTC1: Clear CMOS
1-2 : NORMAL
2-3 : CLEAR RTC
PIN Description
1 P3V3_RTC
2 SOC_SRTCRST_N
3 GND
JRTC2: Clear CMOS
1-2 : NORMAL
2-3 : CLEAR RTC
PIN Description
1 P3V3_RTC
2 SOC_RTEST_N
3 GND
JSPIROM1: Flash BIOS connector
PIN Description PIN Description
1 SPI_HD1# 2 NC
3 SOC_SPI_CS0_R 4 P3V3_SB_SPI
5 SPI_MISO_DUAL_R 6 SPI_HOLD0_L
7 NC 8 SPI_CLK_DUAL_R
9 GND 10 SPI_MOSI_DUAL_R

Chapter 1: Product Overview
20
M2_LTE: M.2 con (Only LTE)
PIN Description PIN Description
1 NC 2 P3V3_AUX
3 GND 4 P3V3_AUX
5 GND 6 PWROFF#
7
USB1_SB_L_DP
8
W_DIS#
9 USB1_SB_L_DN 10 NC
11 GND 12 NC
13 NC 14 NC
15 NC 16 NC
17
NC
18
NC
19 NC 20 NC
21 NC 22 NC
23
NC
24
NC
25 NC 26 NC
27 GND 28 UIM1_VPP1
29
USB3_HRX_L_DTX_N16
30
UIM1_RST1
31 USB3_HRX_L_DTX_P16 32 UIM1_CLK1
33 GND 34 UIM1_DAT1
35
USB3_HTX_L_DRX_N16
36
UIM1_PWR
37 USB3_HTX_L_DRX_P16 38 NC
39 GND 40 NC
41
NC
42
NC
43 NC 44 NC
45
GND
46
NC
47 NC 48 NC
49 NC 50 NGFF_LTE_RST#
51 GND 52 NC
53 NC 54 NC
55 NC 56 NC
57
GND
58
NC
59 NC 60 NC
61 NC 62 NC
63
NC
64
NC
65 NC 66 NC
67 P1V8_A 68 NC
69
NC
70
P3V3_AUX
71 GND 72 P3V3_AUX
73 GND 74 P3V3_AUX
75
NC