Lantronix 222 Series User manual

ION System
x222x / x32xx Remotely Managed Network
Interface Device (NID)
Install Guide
Part Number 33433
Revision D August 2023

Lantronix ION x222x / x32xx Install Guide
33433 Rev. D https://www.lantronix.com/ Page 2of 42
Intellectual Property
© 2022, 2023 Lantronix, Inc. All rights reserved. No part of the contents of this publication may be trans-
mitted or reproduced in any form or by any means without the written permission of Lantronix.
Lantronix is a registered trademark of Lantronix, Inc. in the United States and other countries. All other
trademarks and trade names are the property of their respective holders.
Patented: https://www.lantronix.com/legal/patents/; additional patents pending.
Warranty
For details on the Lantronix warranty policy, please go to http://www.lantronix.com/support/warranty.
Contacts
Lantronix Corporate Headquarters
48 Discovery, Suite 250
Irvine, CA 92618, USA
Toll Free: 800-526-8766
Phone: [phone]
Fax: [phone]
Technical Support
Online: www.lantronix.com/technical-support/
Sales Offices
For a current list of our domestic and international sales offices, go to www.lantronix.com/about/contact.
Disclaimer
All information contained herein is provided “AS IS.” Lantronix undertakes no obligation to update the in-
formation in this publication. Lantronix does not make, and specifically disclaims, all warranties of any
kind (express, implied or otherwise) regarding title, non-infringement, fitness, quality, accuracy, complete-
ness, usefulness, suitability or performance of the information provided herein. Lantronix shall have no
liability whatsoever to any user for any damages, losses and causes of action (whether in contract or in
tort or otherwise) in connection with the user’s access or usage of any of the information or content con-
tained herein. The information and specifications contained in this document are subject to change with-
out notice.
Revision History
Date
Rev
Description
09/01/10
A
Initial manual release.
11/13/15
B
Change format and add S3221-1040-T and Power Supply.
11/28/16
C
Update contact information and install information; add MTBF information.
8/28/23 D
Initial Lantronix rebrand. Update contact information and ordering information.
FW v1.3.26: update ssh server, link state now reflects admin state, improve Local
and Remote backup in stand-alone modules. See the Release Notes for more
information.

Lantronix ION x222x / x32xx Install Guide
33433 Rev. Dhttps://www.lantronix.com/ Page 3of 42
Cautions and Warnings
Definitions
Cautions indicate that there is the possibility of poor equipment performance or potential damage to the
equipment. Warnings indicate that there is the possibility of injury to person. Cautions and Warnings
appear here and may appear throughout this manual where appropriate. Failure to read and understand
the information identified by this symbol could result in poor equipment performance, damage to the
equipment, or injury to persons.
Cautions
Do not ship or store devices near strong electrostatic, electromagnetic, magnetic, or
radioactive fields.
Caution: When handling chassis Network Interface Devices (NIDs) observe electrostatic discharge
precautions. This requires proper grounding (i.e., wear a wrist strap).
Caution: Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485,
DS1, DS3, Video Coax, etc., are intended to be connected to intra-building (inside plant) link segments
that are not subject to lightening transients or power faults. They are not to be connected to inter-building
(outside plant) link segments that are subject to lightening.
Caution: Do not install the NIDs in areas where strong electromagnetic fields (EMF) exist. Failure to
observe this caution could result in poor NID performance.
Caution: Read the installation instructions before connecting the chassis to a power source. Failure to
observe this caution could result in poor performance or damage to the equipment.
Caution: Only trained and qualified personnel should install or perform maintenance on the ION NID.
Failure to observe this caution could result in poor performance or damage to the equipment.
Caution: Do not let optical fibers come into physical contact with any bare part of the body since they are
fragile, and difficult to detect and remove from the body.
Caution: Do not bend any part of an optical fiber/cable to a diameter that is smaller than the minimum
permitted according to the manufacturer’s specification (usually about 65 mm or 2.5 in)!
Warnings
Warning: Use of controls, adjustments or the performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Warning: Visible and invisible laser radiation when open. Do not stare into the beam or view the beam
directly with optical instruments. Failure to observe this warning could result in an eye injury or blindness.
Warning: DO NOT connect the power supply module to external power before installing it into the
chassis. Failure to observe this warning could result in an electrical shock or death.
Warning: Select mounting bracket locations on the chassis that will keep the chassis balanced when
mounted in the rack. Failure to observe this warning could allow the chassis to fall, resulting in equipment
damage and/or possible injury to persons.
Warning: Do not work on the chassis, connect, or disconnect cables during a storm with lightning. Failure to
observe this warning could result in an electrical shock or death.
See Appendix A on page 42 for Electrical Safety Warnings translated into multiple languages.

Lantronix ION x222x / x32xx Install Guide
33433 Rev. D https://www.lantronix.com/ Page 4of 42
Contents
1. Introduction ............................................................................................................................................ 6
About This Manual .................................................................................................................................... 6
Product Overview ..................................................................................................................................... 6
Physical Specifications ............................................................................................................................. 7
All Model x222x / x32xx........................................................................................................................ 7
C2220 Series........................................................................................................................................ 8
C322x Series ........................................................................................................................................ 8
S322x Series ........................................................................................................................................ 8
MTBF Specifications................................................................................................................................. 9
Related Manuals and Online Helps .......................................................................................................... 9
2. Installation and System Setup............................................................................................................ 10
General ................................................................................................................................................... 10
Installing the Chassis Model (C222x / C32xx)........................................................................................ 10
Installing the Standalone Model (S222x / S32xx)................................................................................... 11
Rack Mount Installation ...................................................................................................................... 11
Tabletop Installation ........................................................................................................................... 12
Wall Mount Installation ....................................................................................................................... 13
Connecting to AC Power .................................................................................................................... 14
Connections and LEDs ........................................................................................................................... 15
Model x2220-1040.............................................................................................................................. 15
Model x3221-1040.............................................................................................................................. 17
Model x32x0-10xx .............................................................................................................................. 19
Model S3221-1040-T.......................................................................................................................... 20
Installing the USB Driver - Windows 8 ............................................................................................... 21
Access via an Ethernet Network ........................................................................................................ 25
Initial Setup with a Static IP Address via the CLI.................................................................................... 27
Accessing the NIDs ................................................................................................................................ 28
Access via Local Serial Interface (USB)............................................................................................. 29
Changing Switch Mode (Local / Remote)........................................................................................... 29
3. Troubleshooting................................................................................................................................... 31
General ................................................................................................................................................... 31
Basic ION System Troubleshooting........................................................................................................ 31
Error Indications and Recovery Procedures ........................................................................................... 32
LED Fault and Activity Displays.............................................................................................................. 33
Jumper Settings ...................................................................................................................................... 34
PCB Identification ............................................................................................................................... 34
PCB Layout ........................................................................................................................................ 34
Recording Model Information and System Information .......................................................................... 36
Appendix A. Compliance and Safety Information ................................................................................ 38
Compliance Information.......................................................................................................................... 38
MEF Certifications .................................................................................................................................. 38
Declaration of Conformity ....................................................................................................................... 40
Electrical Safety Warnings...................................................................................................................... 41
Electrical Safety.................................................................................................................................. 41
Elektrische Sicherheit ......................................................................................................................... 41
Elektrisk sikkerhed.............................................................................................................................. 41
Elektrische veiligheid .......................................................................................................................... 41
Sécurité électrique.............................................................................................................................. 41
Sähköturvallisuus ............................................................................................................................... 41
Sicurezza elettrica .............................................................................................................................. 41
Elektrisk sikkerhet............................................................................................................................... 41
Segurança eléctrica............................................................................................................................ 41
Seguridad eléctrica............................................................................................................................. 41
Elsäkerhet........................................................................................................................................... 41

Lantronix ION x222x / x32xx Install Guide
33433 Rev. D https://www.lantronix.com/ Page 5of 42
List of Figures
Figure 1: Chassis Installation ..................................................................................................................... 10
Figure 2: Tabletop Installation.................................................................................................................... 12
Figure 3: Wall Mount Installation................................................................................................................ 13
Figure 4: AC Power Connection ................................................................................................................ 14
Figure 5: Model C2220-1040 Connectors and LEDs ................................................................................. 15
Figure 6: Model S2220-1040 Connectors and LEDs ................................................................................. 15
Figure 7: Model C3221-1040 Connectors and LEDs ................................................................................. 17
Figure 8: Model S3220-1040 Connectors and LEDs ................................................................................. 17
Figure 9: Model C32x0-10xx Connectors and LEDs ................................................................................. 19
Figure 10: Model S32x0-10xx Connectors and LEDs................................................................................ 19
Figure 11: Model S3221-1040-T ................................................................................................................ 20
List of Tables
Table 1: Model x2220-1040 Connectors and LED Descriptions................................................................. 16
Table 2: Model x3221-1040 Connectors and LED Descriptions................................................................. 18

Lantronix ION x222x / x32xx Install Guide
33433 Rev. D https://www.lantronix.com/ Page 6of 42
1. Introduction
About This Manual
The purpose of this manual is to provide the user with an understanding of the Lantronix x222x / x32xx
network interface devices (NIDs).
Product Overview
The x222x / x32xx are a group of Ethernet Network Interface Devices (NIDs) that are designed as either a
standalone module (S222x / S32xx) or a slide-in module (C222x / S32xx) that installs in an ION system
chassis. In either configuration, these devices are designed to manage devices remotely through the
copper and fiber ports.
The ION x222x / x32xx Network Interface Devices (NIDs) are 2- or 3-port Ethernet Demarcation Devices
capable of media conversion—one port connects to the network of the provider and the other port
connects to the subscriber. These NIDs are chassis/IP-based managed devices that are designed as
slide-in cards (SICs) for installation in an ION system chassis or as stand-alone modules.
These devices can be managed via Command Line Interface (CLI), Web Interface, or Telnet.
The x222x / x32xx NIDs support Link layer OAM (LOAM, per IEEE 802.3–2005 Clause 57). LOAM is a
group of network management functions that provide network fault indications, performance information,
data, and diagnosis. These devices implement remote management via LOAM per the IEEE 802.3ah
standard.
Ordering Information
S2220 Series
•S2220-1014: 10/100/1000Base-T (RJ-45) [100 m] to 100Base-LX 1310nm single mode (SC) [10
km/6.2 mi.] Link Budget: 16.0 dB
•S2220-1040: 10/100/1000Base-T (RJ-45) [100 m] to 100Base-X SFP Slot (empty)
C2220 Series
•C2220-1014: 10/100/1000Base-T (RJ-45) [100 m] to 100Base-FX 1310nm single mode (SC) [20
km/12.4 mi.] Link Budget: 16.0 dB
•C2220-1040: 10/100/1000Base-T (RJ-45) [100 m] to 100Base-X SFP Slot (empty)
S3220 Series
•S3220-1014: 10/100/1000Base-T (RJ-45) [100 m] to 1000Base-LX 1310nm single mode (SC) [10
km/6.2 mi.] Link Budget: 10.5 dB
•*S3220-1040: 10/100/1000Base-T (RJ-45) [100 m] to (1) 100/1000Base-X Open SFP Slot
•*S3221-1040: 10/100/1000Base-T (RJ-45) [100 m] to (2) 100/1000Base-X Open SFP Slots

Lantronix ION x222x / x32xx Install Guide
33433 Rev. D https://www.lantronix.com/ Page 7of 42
•*S3221-1040-T: 10/100/1000Base-T (RJ-45) [100 m] to (2) 100/1000Base-x Open SFP Slots,
Extended Operating Temp Range
C3220 Series
•C3220-1014: 10/100/1000Base-T (RJ-45) [100 m] to 1000Base-LX 1310nm single mode (SC) [10
km/6.2 mi.] Link Budget: 10.5 dB
•C3220-1040*: 10/100/1000Base-T (RJ-45) [100 m] to (1) 100/1000Base-X SFP Slot (empty)
•C3221-1040*: 10/100/1000Base-T (RJ-45) [100 m] to (2) 100/1000Base-X SFP Slots (empty)
Compatible Accessories (Sold Separately)
WMBL: 4″ [102 mm] Fits Stand-Alone Converters size 4.8″ [122 mm] and 6.5″ [165 mm]
RMS19-SA4-02: 4-Slot Media Converter Shelf, includes 4 brackets and 3 slot blanks
WMBD: 5″ [127 mm] DIN Rail Mount Bracket Fits all Stand-Alone Converters; 1- or 2-Slot ION Chassis
SFP Modules: SFP modules supported on some slide-in cards; see the Lantronix SFP webpage.
Note: all units feature USB port for local management application.
* C3220-1040 and C3221-1040 have SGMII support for use with 10/100/1000Base-T copper SFPs.
Features
See the x222x / x32xx Web User Guide for features.
•MEF 9, 14 and 21 certified
•IEEE 802.3ah Link OAM
•10K Jumbo Frame Support
•Two selectable Remote Management
modes:
oIP-Based Remote Management
oIn-Band (remote device managed by
local peer)
•Auto-MDI/MDIX
•Auto-Negotiation
•Pause
•Transparent Link Pass Through
•Far-End-Fault (FEF)
•Remote Loopback
•Field Upgradeable Firmware
•IEEE 802.1p QoS packet classification
•IPv4 IP TOS, DiffServ and IPv6 traffic
class QoS classification
•IEEE 802.1Q VLAN and double VLAN
tagging with 4096 VIDs
•DHCP client
•SNTP
•TFTP
•RADIUS client
•RMON counters for each port
•Bandwidth profiling
•DMI Optical Management
•Cable diagnostic function for copper
ports
•SSH
•Telnet
•Command Line Interface (CLI)
•Web management
•SNMP v1, v2c, and v3
•USB port for basic setup
•Management VLAN
Physical Specifications
The physical specifications for the chassis slide-in modules are described ibelow.
All Model x222x / x32xx
Dimensions SIC: 3.4” x 0.86” x 6.5” (86 mm x 22 mm x 165 mm)
Standalone: 3.25” x 1.0” x 6.5” (82 mm x 25 mm x 165 mm)
MAC Filtering 8K MAC addresses
Power Input Standalone: 12VDC @ 375mA

Lantronix ION x222x / x32xx Install Guide
33433 Rev. D https://www.lantronix.com/ Page 8of 42
SIC: Powered by the Chassis
Environment 0 to 50°C (32 to 122°F) operating;
5% - 95% humidity (non-condensing)
0 to 10,000 ft. altitude
Storage Temp -40 to 85°C (-40 to 185°F)
C2220 Series
Standards IEEE Std. 802.3, IEE std. 802.3ah, IEE Std. 802.1P, IEEE std. 802.1Q
Data Rate Copper: 10/100/1000Mbps
Fiber: 100Mbps
Filtering Address 8K MAC Addresses
Power Consumption 4.5 Watts
Shipping Weight 1 lb. [.45 kg]
Regulatory Compliance EN55022 Class A, EN55024, CE Mark
C322x Series
Standards IEEE Std. 802.3, IEEE Std. 802.3ah, IEEE Std 802.1P,
IEEE Std 802.1Q
Data Rate Copper: 10/100/1000Mbps
Fiber: 1000Mbps
Max Frame Size 10,240 bytes
Power Consumption 4.5 Watts
Shipping Weight 1 lb. [.45 kg]
Regulatory Compliance EN55022 class A, EN55024, CE Mark
The physical specifications for the chassis slide-in modules are described in Table 4 below.
S322x Series
Standards IEEE Std. 802.3, IEEE Std. 802.3ah, IEEE Std 802.1P,
IEEE Std. 802.1Q
Data Rate Copper: 10/100/1000Mbps
Fiber: 1000Mbps
Max Frame Size 10,240 bytes
Dimensions Width: 3.25” [82 mm]
Depth: 6.5” [165 mm]
Height:1.0” [25 mm]
Power Input: 100-240VAC, 1A
Output: 12VDC, 1.25A
Shipping Weight 2.0 lbs. [0.90 kg]
Regulatory Compliance EN55022 Class A, EN55024, UL60950, CE Mark

Lantronix ION x222x / x32xx Install Guide
33433 Rev. D https://www.lantronix.com/ Page 9of 42
MTBF Specifications
The Lantronix the x322x-10xx MTBF is provided below:
With Power Supply:
MTBF to be greater than 65,000 MIL-HDBK-217F Hours.
MTBF to be greater than 178,000 Bellcore Hours.
Without Power Supply:
MTBF to greater than 250,000 MIL-HDBK-217F Hours.
MTBF to be greater than 687,500 Bellcore Hours
Related Manuals and Online Helps
A printed documentation card is shipped with each x222x / x32xx device. Context-sensitive Help screens,
as well as cursor-over-help (COH) facilities are built into the Web interface.
A substantial set of technical documents, white papers, case studies, etc. are available on the Support
web page. Note: Some Documentation may have Transition Networks named or pictured. Transition
Networks was acquired by Lantronix in August 2021.
The ION system and related device manuals are listed below.
1. ION x222x / x32xx NID User Guide, 33472
2. ION Systems CLI Reference Manual, 33473
3. ION219-A 19-Slot Chassis Installation Guide, 33412
4. ION Management Module (IONMM) User Guide, 33457
5. SFP manuals (product specific - see the SFP product page)
6. Release Notes (software version specific)
7. Product Documentation Postcard, 33504
This manual may provide links to third part web sites for which Lantronix is not responsible. Information in
this document is subject to change without notice. All information was deemed accurate and complete at
the time of publication. This manual documents the latest software/firmware version. While all screen
examples may not display the latest version number, all of the descriptions and procedures reflect the
latest software/firmware version, noted in the Revision History on page 2.

Lantronix ION x222x / x32xx Install Guide
33433 Rev. D https://www.lantronix.com/ Page 10 of 42
2. Installation and System Setup
General
This section describes how to install the x222x / x32xx NID and the procedures to access and initially set
up the NID through either a local serial interface (USB) or a remote Ethernet connection (Telnet session
or Web interface).
Installing the Chassis Model (C222x / C32xx)
The Cx2xx NID is a slide-in module that can only be installed in a Lantronix ION chassis (ION001-x and
ION219-x). For a complete list of ION platform products, go to the ION
This section describes how to install the Cx2xx in the ION chassis.
Caution: Failure to wear a grounding device and observe electrostatic discharge precautions when
installing the C222x / C32xx could result in damage or failure of the module.
Figure 1: Chassis Installation