LANYA ELECTRONIC SY58001 User manual

Intelligent sleep monitor（WiFi）
instruction manual
SY58001
Thank you for choosing our smart products, which will bring you comfort and convenience. In order to
enable you to better install and use this product, here we remind you to carefully read this instruction manual.
If you have any questions, please visit our website www.iksonya.com, we will serve you
wholeheartedly.
I. Product profile and characteristics
SY58001 TightSleep intelligent sleep monitor is one of the series of intelligent products of
IK.Sonya, which can realize all-around sleep monitoring with multi-dimensional data collection of
heart rate, breathing rate, body movement, turning over, leaving bed, deep and shallow sleep, sleep
duration, sleep abnormality and so on. It can realize remote and real-time view of dynamic sleep
analysis data, alarm information, quality report and periodic data through the exclusive mobile phone
app. Its characteristics are as follows:
◆Real-time accurate measurement and monitoring of heart rate and respiratory rate ;
◆Body movement and abnormal state in / off bed judgment;
◆Mobile phone alarm of abnormal status, notification of people for help;
◆Intelligent record of sleeping state, healthy life hints;
◆Safe and senseless design, sleep comfortably and unfettered;
◆The night lights are turned on / off, to illuminate the way under feet.
II. Product diagram
Intelligent sleep monitor（WiFi）
III. Installation mode and requirements
Heart rate sensor
Magnetic suction seat
Indicator light Little night light
Light sense
Power adapter
Power cord
“Set”key

IV. Method of use
(I) Habitable Life APP download method
Download APP
(II) Intelligent APP adding device
Step 1:After installation of the Intelligent APP and account
registration, click on the “+” at the top right corner of the
home page to add the device.
Step 2: Click "intelligent sleep monitor (WiFi)" on the
"select device model" interface.
Step 3: Insert the USB power cord into the power adapter
and switch on the power supply.
Step 1: Place the intelligent sleep monitor on the mattress
(chest position) and cover the sheets.
Step 2: The magnetic suction seat should be glued to the
appropriate position with double-sided glue, and the
intelligent sleep monitor is attached to the magnetic suction
seat.
Cover the sheets
1. The power cord
2. Intelligent sleep monitor
3. Magnetic suction seat
4. Double-sided glue

(III) Light status description
Function Indicator state
Switch (the power) on Continuous green light, extinguished in 3 seconds
communicating Red light flickers
Connecting to the network Green light flickers
Add device Continuous Green light
V. Technical parameters
Outside dimensions: 880mm×100mm×15mm；
Rated voltage: DC5V；
Rated current: 0.8A；
Mode of communication: WiFi 2.4G；
Product weight: 200g.
VI. Matters needing attention
Please use the original factory adapter;
Please place this product in a fixed position to prevent falling;
No force to bend the heart rate sensor;
It is forbidden to use this product in the environment of high temperature, high pressure, high humidity and
strong magnetic field.
VII. Packing list
An intelligent sleep monitor;
A power adapter;
A setting needle;
A magnetic suction seat;
An instruction manual;
A product warranty card;
A certificate of qualification (affixed to the product).
Step 3: Follow the smart APP interface prompts to complete
the addition.

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.