LAPIS Semiconductor ML610Q174 User manual
Dear customer
LAPIS Semiconductor Co., Ltd. ("LAPIS Semiconductor"), on the 1st day of October,
2020, implemented the incorporation-type company split (shinsetsu-bunkatsu) in which
LAPIS established a new company, LAPIS Technology Co., Ltd. (“LAPIS
Technology”) and LAPIS Technology succeeded LAPIS Semiconductor’s LSI business.
Therefore, all references to "LAPIS Semiconductor Co., Ltd.", "LAPIS Semiconductor"
and/or "LAPIS" in this document shall be replaced with "LAPIS Technology Co., Ltd."
Furthermore, there are no changes to the documents relating to our products other than
the company name, the company trademark, logo, etc.
Thank you for your understanding.
LAPIS Technology Co., Ltd.
October 1, 2020
ML610Q174 Reference Board
User’s Manual
Issue Date: Dec 5, 2013
FEBL610Q174-01
ML610Q174 Reference Board User’s Manual
1
NOTES
No copying or reproduction of this document, in part or in whole, is permitted without the consent of LAPIS Semiconductor Co.,
Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing LAPIS Semiconductor 's products (hereinafter "Products"). If you
wish to use any such Product, please be sure to refer to the specifications, which can be obtained from LAPIS Semiconductor upon
request.
Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and
operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any
damage arising from any inaccuracy or misprint of such information, LAPIS Semiconductor shall bear no responsibility for such
damage.
The technical information specified herein is intended only to show thetypical functions of and examples of application circuits for
the Products. LAPIS Semiconductor does not grant you, explicitly or implicitly, any license to use or exercise intellectual property
or other rights held by LAPIS Semiconductor and other parties. LAPIS Semiconductor shall bear no responsibility whatsoever for
any dispute arising from the use of such technical information.
The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio
visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While LAPIS Semiconductor always makes efforts to enhance the quality and reliability of its Products, a Product may fail or
malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical
injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and
fail-safe designs. LAPIS Semiconductor shall bear no responsibility whatsoever for your use of any Product outside of the
prescribed scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high
level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury
(such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other
safety device). LAPIS Semiconductor shall bear no responsibility in any way for use of any of the Products for the above special
purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before
purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign
Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Copyright 2013 LAPIS Semiconductor Co., Ltd.
ML610Q102 Reference Board User’s Manual
2
Preface
This manual describes the operation of the ReferenceBoard of the 8-bit microcontroller
ML610Q174.
The following manuals are also available. Read them as necessary.
ML610Q174 User’s Manual
Description on the operation of the hardware of the 8-bit microcontroller
ML610Q174.
ML610Q172 / ML610Q173 User’s Manual
Description on the operation of the hardware of the 8-bit microcontroller
ML610Q172/ML610Q173.
uEASE User’s Manual
Description on the on-chip debug tool uEASE.
ML610Q174 Reference Board User’s Manual
3
1. Overview
1.1 Features
ML610Q174 Reference board is prepared by LAPIS SEMICONDUCTOR to have you study the operations of
ML610Q174.
The board is arranged so that necessary components are mounted by you according to your purpose, then only
minimum necessary components are mounted on the board by LAPIS SEMICONDUCTOR for brief use of
ML610Q174.
By using the board with "uEASE on-chip debug emulator" (hereinafter referred to "uEASE") and "free sample U8
Development Tools CD-ROM" which is bundled in the package of uEASE not only Software development/debugging
but also writing Flash ROM in the devices are capable.
This board also works in stand alone mode with external power suppy without uEASE.
ML610Q172 and ML610Q173 exist as 64 pin versions of ML610Q174. Please use this board also for development and
debugging of the software of ML610Q172. Please refer to “ML610Q172/ML610Q173 User’s Manual” for the detail of
ML610Q174 and ML610Q172/ML610Q173.
Before starting works with this board, read below carefully and understand notices.
The hardware specification of this board is shown below.
Embedded
microcontroller U1/U2(Mounting / IC-Socket): ML610Q174
・UVDD、VSS: Input power supply pin
・PWR: Jumper for input power supply switch ( 3pin pin-header and short pin )
・CNUE: Connector for on-chip debug emulator ( 14pin connector )
・XT_1/XT_2(Mounting / IC-Socket ): 32.768kHz oscillator
・OSC_1/OSC_2(Mounting / IC-Socket): 8MHz oscillator
・P20-P23,P90-P91: Light emitting diodes
・C1-C3/C10-C12(Mounting / IC-Socket): Capacitors for LCD external input voltage connection（3 pieces）
・C4/C13(Mounting / IC-Socket): Capacitors for RESET_N pin.
・C5/C14(Mounting / IC-Socket): Capacitors for VREF input voltage connection.
・C6-C7/C15-C16: Capacitors for input voltage ( 2pieces )
・C8-C9/C17-C18(Mounting / IC-Socket): Capacitors for 32.768kHz oscillator ( 2pieces )
・R1-R6: Resistance for light emitting diodes (P20-P23,P90-P91）
Embedded parts
・R7-R9/R10-R12(Mounting / IC-Socket): Resistance for LCD external input voltage connection（3 pieces）
・SP1-SP6: Lands for light emitting diodes.
・SP9-SP10(Mounting / IC-Socket): Lands for P10, P11 terminal connection
・SP16/SP19(Mounting / IC-Socket): Pads for bonding of P85/VL2 and LCD external input voltage.
・SP17/SP20(Mounting / IC-Socket): Pads for bonding of P84/VL1 and LCD external input voltage.
・AIN0-AIN11: Land for SA-ADC terminal connection
Pads
for mounting
・CN1-CN4: Pads for peripheral board connectors（30pin×2、20pin×2、2.54mm pitch）
Other useful pads ・VDD、VSS、UVDD、VREF、AIN0-AIN11
Operating voltage ・VDD = +2.2V to +5.5V、VREF = +4.5V to +5.5V
Board size ・100.00 x 120.00 mm
This board is made on the assumption that it is used carrying in a user circuit. When used with this board simple
substance, please use on an insulating material. An operation abnormality may be caused when used on a conductive
material.
ML610Q174 of the engineering sample may be carried in this board. Please confirm the final confirmation of an
electrical property etc. on mass production goods and customer's production board. The support about this board is not
accepted. Only in the case of initial failure, exchange responds.
ML610Q102 Reference Board User’s Manual
4
1.2 The external view of a board
The external view of ML610Q174 ReferenceBoard is shown.
Fig.1. ML610Q174 ReferenceBoard External view
Fig.2. Direction of device set
When a device is set to a reference board, please carry out, where the power is turned off. Moreover, please
set not to mistake the direction of a device.
P20-P23
CN2
UVDD
VSS
U2
Socket
CNUE
CN1 PWR
P90-P91
OSC_2
XT_2
U1
Mounting
XT_1
OSC_1
VREF CN4
CN3
1pin
ML610Q174 Reference Board User’s Manual
5
2. Function
2.1 PWR Jumper
It is a jumper which selects the power source of this board. When supplying voltage from uEASE, set a PWR jumper
to the "uE" side.
The ability to supply power of the uEASE is +3.3v/100mA.
When a power supply is inputted from the external, please input between check pin UVDD-VSS and set a PWR jumper
to the "USR" side.
Fig.3. PWR Jumper
Note:
Where the PWR jumper is set to the "USR" side, when uEASE is connected, please turn ON the power supply of a
user application system after connecting uEASE. Moreover, please remove uEASE after turning OFF the power
supply of a user application system.
ML610Q174 VDD
CNUE
UVDD
13pin
uE
USR
PWR
ML610Q102 Reference Board User’s Manual
6
2.2 The case of using successive approximation ADC
When a conversion target is inputted into AIN0-AIN11, without going via CN1/CN4, Please cut the pattern of
AIN0-AIN11 if needed and input from the hole near a device.
The example of processing is shown below.
Fig.4. AIN0-AIN15 (SA-ADC)
VREF is connected with VDD by the jumper at the time of shipment. When you input arbitrary voltage, please change
a VREF jumper to the USER side and input VREF voltage from 1_CN6 pin (VREF).
The example of processing is shown below.
Fig.5. VREF(SA-ADC)
Top View
Please input directly
from the hole of
the side here
a
f
te
r
cutt
in
g
.
Cut Pattern
Top View
Remove
Short
ML610Q174 Reference Board User’s Manual
7
2.3 The case of using light emitting diodes
P20-P23, P90-P91 can drive direct to light emitting diodes. P20-P23, P90-P91 are wired with light emitting diodes on
this board. Please remove the parts mounted in SP1-SP6.
The example of processing is shown below.
Fig.6. SP1-SP5 pads
2.4 The case of driving LCDs
The chip resistor of 2012 sizes can be mounted between VL3 to VDD (SP7/SP11 pad). At the time of shipment, since
VDD and VL3 short-circuit, please mount a chip resistor in SP7/SP11 if needed. Please refer to figure 6.( VL3 )
The example of processing is shown below.
Fig.7. SP7/SP11 pads
Note:
It is a short condition between VL3 and LCD driving voltage input pin (SP15/SP18). Moreover, it is an open condition
between P85/VL2 and an LCD driving voltage input pin (SP16/SP19 pad) and between P85/VL2 and LCD driving
voltage input pin (SP17/SP20).
As for the method of using VL3, P85/VL2 and P84/VL1 as LCD driving power sources, the following three kinds of
methods exist.
・ The LCD external input voltage on a reference board is used.
・ Voltage is inputted from CN1_24 to 26.
・ Voltage is generated using a built-in LCD resistance.
Please be careful for the LCD external input voltage on a reference board, the voltage inputted from CN1_24～26, and
the voltage generated inside LSI not to short-circuit.
Top View
Remove
Top View
ML610Q102 Reference Board User’s Manual
8
2.5 P10-P11 is used as general purpose input ports
P10-P11 can change and use a 8MHz oscillation terminal and a general input port terminal. When you use it as a
general input port terminal, please remove an 8MHz oscillator and short-circuit SP9/SP10 and SP13/SP14,
respectively. Please refer to figure 7. ( P10,P11 8MHz oscillator )
The example of processing is shown below.
Fig.7. SP9/SP10、SP13/SP14 pads
Top View
Remove
Short
ML610Q174 Reference Board User’s Manual
9
3. User interface
3.1 The user interface of ML610Q174 Reference Board
The pin assignment of CN1, CN2, CN3 and CN4 of the reference board embedded ML610Q174 in below is shown.
Table 1. ML610Q174 Reference Board CN1 / CN2
CN1 Name LSI
Pin No.
CN2 Name LSI
Pin No.
1 P44/T0P4CK/AIN4/SIN0 19 1 SEG0 41
2 P33/AIN3 20 2 SEG1 42
3 P32/AIN2 21 3 SEG2 43
4 P31/PW6EV1/AIN1 22 4 SEG3 44
5 P30/PW45EV1/AIN0 23 5 SEG4 45
6 VREF 24 6 SEG5 46
7 P50/AIN8/SIN1 15 7 SEG6 47
8 P51/AIN9/SCK1 14 8 SEG7 48
9 P52/CMP0P/RXD1/SOUT1 13 9 PC0/SEG8 49
10 P53/CMP1P/TXD1/PWM6/TXD0 12 10 PC1/SEG9 50
11 P34/AIN11/PWM4 10 11 PC2/SEG10 51
12 P35/AIN10/PWM5 11 12 PC3/SEG11 52
13 P36/LSCLK 33 13 PC4/SEG12 53
14 NC --- 14 PC5/SEG13 54
15 NC --- 15 PC6/SEG14 55
16 P10/OSC0 25 16 PC7/SEG15 56
17 P11/OSC1 26 17 PD0/SEG16 57
18 VSS 27 18 PD1/SEG17 58
19 UVDD 28 19 PD2/SEG18 59
20 NC --- 20 PD3/SEG19 60
21 NC ---
22 NC ---
23 NC ---
24 VL3 34
25 P85/VL2 35
26 P84/VL1 36
27 P83/COM3 37
28 P82/COM2 38
29 P81/COM1 39
30 P80/COM0 40
ML610Q102 Reference Board User’s Manual
10
Table 2. ML610Q174 Reference Board CN3 / CN4
CN3 Name LSI
Pin No. CN4 Name LSI
Pin No.
1 PD4/SEG20 61 1 P20/LED0/LSCLK/PWM4 79
2 PD5/SEG21 62 2 P21/LED1/OUTCLK/PWM5 80
3 PD6/SEG22 63 3 P22/LED2/TM9OUT 2
4 PD7/SEG23 64 4 P23/LED3/TMBOUT 3
5 NC --- 5 VSS 1
6 NC --- 6 P90/LED4 4
7 NC --- 7 P91/LCD5 5
8 NC --- 8 NC ---
9 NC --- 9 NC ---
10 NC --- 10 NC ---
11 NC --- 11 NC ---
12 NC --- 12 NC ---
13 PF0/SEG32/SIN0 65 13 NC ---
14 PF1/SEG33/SCK0 66 14 NC ---
15 PF2/SEG34/RXD0/SOUT0 67 15 NC ---
16 PF3/SEG35/TXD0/PWM4/TXD1 68 16 NC ---
17 PF4/SEG36/SIN1/PWM4 69 17 NC ---
18 PF5/SEG37/SCK1/PWM5 70 18 P47/T9BCK/AIN7/CMP1M 16
19 PF6/SEG38/RXD1/SOUT1/PWM6 71 19 P46/T8AP6CK/AIN6/CMP0M 17
20 PF7/SEG39/TXD1/TXD0 72 20 P45/T1P5CK/AIN5 18
21 RESET_N 32
22 P40/SDA/SIN0 6
23 P41/SCL/SCK0 7
24 P42/RXD0/SOUT0 8
25 P43/TXD0/PWM4/TXD1 9
26 P00/EXI0/PW45EV0 75
27 P01/EXI1/PW6EV0 76
28 P02/EXI2/RXD0 77
29 P03/EXI3/RXD1 78
30 NC ---
ML610Q174 Reference Board User’s Manual
11
4. The circuit diagram and substrate dimensional drawing
The circuit diagram and substrate dimensional drawing of this board are shown after a next page.
VSS
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/OI/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
IN
IN
VSS
VDD
VSS
VSS VSS
VSS
VSS
TITLE
2 2
1
C
1
3
4
A B D
APPLICATION
DWG NO
REV
DRAWN By
LAPIS Semiconductor Co., Ltd.
3
4
C DA
SHEET
B
VSS
VSS
VDD
VSS VSS
VSS
VDD
IN
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
1
VSS
VDD
LED
LED
LED
LED
LED
LED
1
PD4/SEG20
PD5/SEG21
PD6/SEG22
PD7/SEG23
P47/AIN7
P46/AIN6
P91/LED5
P90/LED4
P23/LED3
P22/LED2
P35/AIN10
P53/TXD1
P52/RXD1
PD0/SEG16
PD1/SEG17
PD2/SEG18
PD3/SEG19
VSS_1
P21/LED1
P20/LED0
P03/EXI3
P41/SCL
P42/RXD0
P43/TXD0
P34/AIN11
P02/EXI2
P01/EXI1
P00/EXI0
TEST1_N
TEST0
PF7/SEG39
PF6/SEG38
PF5/SEG37
PF1/SEG33
PF2/SEG34
PF3/SEG35
PF4/SEG36
P36/LSCLK
VL3
P85/VL2
P84/VL1
P83/COM3
P82/COM2
P81/COM1
P80/COM0
SEG0
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
PC0/SEG8
PC1/SEG9
PC2/SEG10
PC3/SEG11
PC4/SEG12
PC5/SEG13
PC6/SEG14
PC7/SEG15
P10/OSC0
P11/OSC1
VSS_27
VDD
VDDL
XT0
XT1
RESET_N
P51/AIN9
P50/AIN8
P44/AIN4
P33/AIN3
VREF
P30/AIN0
P40/SDA
P45/AIN5
PF0/SEG32
P32/AIN2
P31/AIN1
IC_SOCKET
VSS
PD4/SEG20
PD5/SEG21
PD6/SEG22
PD7/SEG23
P47/AIN7
P46/AIN6
P91/LED5
P90/LED4
P23/LED3
P22/LED2
P35/AIN10
P53/TXD1
P52/RXD1
PD0/SEG16
PD1/SEG17
PD2/SEG18
PD3/SEG19
VSS_1
P21/LED1
P20/LED0
P03/EXI3
P41/SCL
P42/RXD0
P43/TXD0
P34/AIN11
P02/EXI2
P01/EXI1
P00/EXI0
TEST1_N
TEST0
PF7/SEG39
PF6/SEG38
PF5/SEG37
PF1/SEG33
PF2/SEG34
PF3/SEG35
PF4/SEG36
P36/LSCLK
VL3
P85/VL2
P84/VL1
P83/COM3
P82/COM2
P81/COM1
P80/COM0
SEG0
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
PC0/SEG8
PC1/SEG9
PC2/SEG10
PC3/SEG11
PC4/SEG12
PC5/SEG13
PC6/SEG14
PC7/SEG15
P10/OSC0
P11/OSC1
VSS_27
VDD
VDDL
XT0
XT1
RESET_N
P51/AIN9
P50/AIN8
P44/AIN4
P33/AIN3
VREF
P30/AIN0
P40/SDA
P45/AIN5
PF0/SEG32
P32/AIN2
P31/AIN1
ML610Q174
VDD
VDD
1 of 2 1.00
QTS-11583
ML610Q174 Reference Board
ML610Q174
P22/LED2
P23/LED3
P90/LED4
P91/LED5
P40/SDA
P41/SCL
P42/RXD0
P43/TXD0
P53/TXD1
P34/AIN11
P35/AIN10
P52/RXD1
P51/AIN9
P47/AIN7
P46/AIN6
P45/AIN5
P44/AIN4
P33/AIN3
P32/AIN2
P31/AIN1
P30/AIN0
P50/AIN8 RESET_N
P36/LSCLK
VL3
P85/VL2
P84/VL1
P83/COM3
P82/COM2
P81/COM1
P80/COM0
SEG0
SEG7
SEG6
SEG5
SEG4
SEG3
SEG1
SEG2
PC2/SEG10
PC1/SEG9
PC3/SEG11
PC4/SEG12
PC5/SEG13
PC6/SEG14
PC7/SEG15
PD0/SEG16
PD1/SEG17
PD2/SEG18
PD3/SEG19
PD4/SEG20
PD5/SEG21
PD6/SEG22
PD7/SEG23
PC0/SEG8 PF0/SEG32
PF1/SEG33
PF2/SEG34
PF3/SEG35
PF4/SEG36
PF5/SEG37
PF6/SEG38
PF7/SEG39
TEST0
TEST1_N
P00/EXI0
P01/EXI1
P02/EXI2
P03/EXI3
P20/LED0
P21/LED1
SP22
SP12
SP20
SP21
SP8
PIN80
PIN79
PIN78
PIN77
PIN76
PIN75
PIN74
PIN73
PIN72
PIN71
PIN70
PIN69
PIN68
PIN67
PIN66
PIN65
PIN64
PIN63
PIN62
PIN61
PIN60
PIN59
PIN58
PIN57
PIN56
PIN55
PIN54
PIN53
PIN52
PIN51
PIN50
PIN49
PIN48
PIN47
PIN46
PIN45
PIN44
PIN43
PIN42
PIN41
PIN34
PIN35
PIN36
PIN32
PIN23
PIN22
PIN21
PIN20
PIN19
PIN18
PIN17
PIN16
PIN15
PIN14
PIN13
PIN12
PIN11
PIN10
PIN9
PIN8
PIN7
PIN6
PIN5
PIN4
PIN3
PIN2
PIN32
PIN40
PIN38
PIN35
PIN34
PIN33
2/2A
PIN32
2/2C
PIN24
PIN23
PIN22
2/1A
PIN21
PIN20
PIN19
PIN18
PIN17
PIN16
2/2D
PIN15
2/1A
PIN14
PIN13
PIN12
PIN11
PIN10
PIN9
PIN8
PIN7
PIN6
PIN5
PIN4
PIN3
PIN2
PIN41
PIN42
PIN43
PIN44
PIN45
PIN46
PIN47
PIN48
PIN49
PIN50
PIN51
2/1B
PIN52
2/2B
PIN53
2/2B
PIN54
2/2B
PIN55
2/2B
PIN56
2/2B
PIN57
2/2B
PIN58
2/2B
PIN59
2/2B
PIN60
2/2B
PIN61
2/1C
PIN62
2/1C
PIN63
2/1C
PIN64
PIN65
2/2C
PIN66
PIN67
PIN68
PIN69
PIN70
PIN71
PIN72
PIN73
PIN74
PIN75
PIN76
PIN77
PIN78
PIN79
PIN80
2/1D
PIN14 2/1A
PIN13 2/1A
PIN12 2/1A
PIN9 2/2C
PIN8 2/2C
PIN7 2/2C
PIN6 2/2C
PIN5 2/1D
PIN4 2/1D
PIN2 2/1D
PIN3 2/1D
PIN10 2/1A
PIN11 2/2A
PIN5
PIN4
PIN3
PIN2
PIN80
PIN79
PIN24
PIN[80:1]
PIN24
PIN36 2/2A
PIN32
PIN33
PIN34 2/2A
PIN35 2/2A
PIN37 2/2A
PIN38 2/2A
PIN39 2/2A
PIN40 2/2A
PIN41 2/1B
PIN42 2/1B
PIN43 2/1B
PIN44 2/1B
PIN45 2/1B
PIN46 2/1B
PIN47 2/1B
PIN48 2/1B
PIN64 2/1C
PIN63
PIN62
PIN61
PIN60
PIN59
PIN58
PIN57
PIN56
PIN55
PIN54
PIN53
PIN52
PIN51
PIN49 2/1B
PIN50 2/1B
PIN79 2/1D
PIN78 2/2C
PIN77 2/2C
PIN76 2/2C
PIN75 2/2C
PIN74 2/3A
PIN73 2/3A
PIN72 2/2C
PIN71 2/2C
PIN70 2/2C
PIN69 2/2C
PIN68 2/2C
PIN67 2/2C
PIN66 2/2C
PIN65
PIN80
PIN15
PIN16
PIN17 2/2D
PIN18 2/2D
PIN19 2/1A
PIN20 2/1A
PIN21 2/1A
PIN22
PIN23 2/1A
PIN36
PIN37
PIN39
PIN34
PIN35
PIN36
PIN32
PIN33
PIN34
PIN35
PIN36
PIN37
PIN38
PIN39
PIN40
61
62
63
64
16
17
5
4
3
2
11
12
13
57
58
59
60
1
80
79
78
7
8
9
10
77
76
75
74
73
72
71
70
66
67
68
69
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
25
26
27
28
29
30
31
32
14
15
19
20
24
23
6
18
65
21
22
U1
VDDUSR
C
VREF
SP19
SP18SP15
SP17
SP16
SP6
SP4
61
62
63
64
16
17
5
4
3
2
11
12
13
57
58
59
60
1
80
79
78
7
8
9
10
77
76
75
74
73
72
71
70
66
67
68
69
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
25
26
27
28
29
30
31
32
14
15
19
20
24
23
6
18
65
21
22
U2
SP11
C100.22UF
C110.22UF
R10
200K
C120.22UF
R11
200K
R12
200K
C18 12PF
C17 12PF
C132.2UF
C16 10UF
C15 10UF
C141UF
C30.22UF
R9
200K
R8
200K
R7
200K
C20.22UF
C10.22UF
SP7
12
XT_1
C9 12PF
C8 12PF
C7 10UF
C42.2UF
C6 10UF
C51UF
SP5
SP3
SP2
SP1
P20
P21
P22
P23
P90
P91
R6
560
R5
560
R4
560
R3
560
R2
560
R1
560
SP14
SP13
SP10
SP9
AIN0
AIN1
AIN2
AIN3
AIN4
AIN5
AIN6
AIN7
AIN8
AIN9
AIN10
AIN11
12
XT_2
1
2
3
OSC_2
1
2
3
OSC_1
VREF_IN 2/1A
P10 2/2A
P11 2/2A
VDD
VSS
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O I/O
I/O
I/O
I/O
I/O
OUT
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
TITLE
2 2
1
C
1
3
4
A B D
APPLICATION
DWG NO
REV
DRAWN By
LAPIS Semiconductor Co., Ltd.
3
4
C DA
SHEET
B
I/O
I/O
I/O
I/O
OUT
I/O
OUT
OUT
OUT
OUT
I/O
I/O
IN
CN14P
I/O
I/O
I/O
I/O
CN20P CN30P CN20P
OUT
CN30P
VSS
VSS
1.00
P32/AIN2
P31/AIN1
P36/LSCLK
RESET_N
P90/LED4
P91/LED5
P47/AIN7
P45/AIN5
2 of 2
TEST0
TEST1_N
P33/AIN3
P30/AIN0
P50/AIN8
P51/AIN9
P52/RXD1
P53/TXD1
P34/AIN11
P35/AIN10
VL3
P85/VL2
P84/VL1
P83/COM3
P82/COM2
P81/COM1
P80/COM0
P44/AIN4 SEG0
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
PC0/SEG8
PC1/SEG9
PC2/SEG10
PC3/SEG11
PC4/SEG12
PC5/SEG13
PC6/SEG14
PC7/SEG15
PD0/SEG16
PD1/SEG17
PD2/SEG18
PD3/SEG19
PD4/SEG20
PD5/SEG21
PD6/SEG22
PD7/SEG23
PF0/SEG32
PF1/SEG33
PF2/SEG34
PF3/SEG35
PF4/SEG36
PF5/SEG37
PF6/SEG38
PF7/SEG39
P40/SDA
P41/SCL
P42/RXD0
P43/TXD0
P00/EXI0
P01/EXI1
P02/EXI2
P03/EXI3
P20/LED0
P21/LED1
P22/LED2
P23/LED3
P46/AIN6
ML610Q174
QTS-11583
ML610Q174 Reference Board
PIN74 1/1D
PIN73 1/1D
VSS
UVDD
VDD
UE USR
C
PWR
P10 1/4B
P11 1/4B
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
14
1
CN1
VREF_IN 1/4A
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
CN4
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
14
1
CN3
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
CN2
1/2A PIN18
PIN171/2A
PIN161/2A
PIN51/1A
PIN41/1A
PIN31/2A
PIN21/2A
PIN801/2A
PIN791/1D
PIN781/1D
PIN771/1D
PIN761/1D
PIN751/1D
PIN91/1A
1/1A PIN8
1/1A PIN7
1/1A PIN6
1/2A PIN32
1/1D PIN72
1/2A PIN71
PIN701/1D
PIN691/1D
PIN681/1D
PIN671/1D
PIN661/1D
PIN651/2A
PIN641/2C
PIN631/2A
PIN621/2A
PIN611/2A
1/2A PIN60
1/2A PIN59
1/2A PIN58
PIN571/2A
1/2A PIN56
1/2A PIN55
1/2A PIN54
1/2A PIN52
PIN511/2A
PIN531/2A
1/2A PIN50
1/2A PIN49
1/2A PIN48
PIN471/2A
1/2A PIN46
1/2A PIN45
1/2A PIN44
1/2A PIN43
1/2A PIN42
PIN411/2A
PIN341/2A
1/2A PIN35
1/1C PIN36
PIN371/2A
PIN381/2A
1/2A PIN39
1/2A PIN40
1/2A PIN33
1/2A PIN11
1/2A PIN10
1/1A PIN12
1/1A PIN13
1/1A PIN14
1/2A PIN15
PIN231/2A
PIN221/2A
PIN211/2A
1/2A PIN20
PIN191/2A
1
10
11
12
13
14
2
3
4
5
6
7
8
9
CNUE
Other manuals for ML610Q174
1
Table of contents
Other LAPIS Semiconductor Computer Hardware manuals
