Digitus IEEE 1394a / FirewireExpressCard User manual

IEEE 1394a / Firewire
ExpressCard
User Manual
DS-31201-2
All brand names and trademarks are properties of their
Respective owners.

Page 2
Features and Benefits
Two external FireWire 400 (1394a) 6-pin ports
Works with DV camcorders, FireWire hard disks, digital
cameras, scanners, CD-RW/DVD drives, video game systems,
and other audio/video devices
Compliant with IEEE 1394-1995, 1394a-2000 and OHCI 1.1
standards
Supports asynchronous and isochronous data transfer modes
Supports data transfer speeds up to 400 Mbps
Hot-swapping allows you to connect / detach devices without
turning off your system
Supports Windows 7, Vista, XP, 2000
System Requirements
Windows 7, Vista, XP, 2000
ExpressCard-enabled system with an available ExpressCard slot

Page 3
Package Contents
1 x IEEE 1394a 2-Port ExpressCard
1 x User’s Manual
Ulead Video Studio CD
Hardware Description

Page 4
CAUTION:
Use only switching power adapter with following specifications:
Switching power adapter (Optional) DC 12V, 1A
Polarity: Outside negative voltage(-) & Inside positive voltage(+)
3.5mm power jack
Hardware Installation
General instructions for installing the card are provided below. Since
the design of system may vary, refer to your system’s reference manual
for further information, if needed.
Insert the Card into the ExpressCard slot of your system. Make sure it
is inserted all the way in for a solid connection.
Driver Installation
Important: If your system doesn’t boot to Windows properly with our
card installed, check with your system’s manufacturer for the latest
system firmware update.

Page 5
For Windows® 2000/XP/2003/Vista
Windows® 2000/XP/2003/Vista will automatically detect and install
the correct driver for the FireWire 2-Port ExpressCard.
To Verify Windows Installation
1. Right click My Computer, then click Manage. Click Device
Manager.
2. Double click IEEE 1394 Bus host controllers option and a VIA
OHCI Compliant IEEE 1394 Host Controller should be
displayed.
Inserting/Removing Devices
When inserting/removing your FireWire device, hold the ExpessCard
and make sure it does not move around inside the slot, otherwise, the
ExpressCard may loose connection or should be ejected from the
system.