Larry vs Harry BBX User manual

BBX Sidepanel Kit
Assembly Manual
by Larry vs Harry

Tools required In the box
Step 1
Wrench/Spanner
mm
10
x4x2
Allan/Hex key
mm
4
Things you need to attach the BBX Sidepanel Kit
Grease
(metal on metal)

Line up all the appropriate
fittings on the Honeycomb
board.
1
Hand tighten the two front
plate brackets.
Be aware: Do not tighten until
sidepanels are attached!
3
Insert the four brackets with
rubber O-rings into the frame
holes. Remember Grease, it helps
to make them fit more easily!
2

Attaching the back panel
Step 2
x2
Back panel
Front Back
Add a bit of grease
(metal on metal)

Attach the fabric backpiece
onto the frame...
1
...using the four attachment
points. Be aware: Only hand
tighten the thread locked nuts!
3
and then attach the Honeycomb
backpiece and rear brackets on
top of the fabric backpiece...
2

Attaching the sidepanels
Step 3
x8
Sidepanels x2
38 cm
46 cm
29 cm
36 cm

Attach both side panels using
the grub screws and ensuring
they are aligned to the frame.
1
...and then the front plate
brackets.
3
Now tighten the back brackets...
2

Putting on the Top Cover
Step 4

Pull the velcro ends together
behind the steerer tube.
4
Tighten the first velcro strap
under the headset cup on the
steerer tube to ensure the covers
fabric is tensioned correctly.
3
Place the front of the fabric
cover over the headtube...
1
...tension fabric using the
attachment points on the side
panels.
2
Et voila! In Use. Variable coverage options
for passengers.
5
2
1

www.larryvsharry.com
Contact your local dealer
if you need help or need more info
So... are you looking for a place to make your own
artwork or putting your own logo all over your Bullitt?
We partnered with a company called Vorova, who are
making high quality stickers for all Bullitt accessories.
They already have all templates for BBX etc, so give it
a look, if you want to snazz up your Bullitt:
vorova.com/partners/larryvsharry
(This is a QR code, if you fancy 90s futuristic stu)