Larry vs Harry Honeycomb Board User manual

Honeycomb Board
Assembly Manual
by Larry vs Harry

Attach the Honeycomb Board to the Bullitt frame
Step 1
Tools required
Wrench/Spanner Phillips Screwdriver
10
mm
Grease
(metal on metal)
x3 x2
*If installing the BBX Sidepanel Kit,
the front plate nuts and bolts
are not required
In the box

Slide the front plate and bottom
plate together...
1
Ensure the plate is aligned in the
center of the frame.
3
...and place the two sections
onto the frame. Rear end first.
2

Tighten screws and bolts
Step 2

Place your tools on the middle
of the plate.
1
...and the two closed end nuts
attach to the front plate.
3
Screw tension should indicate
a small dimple on the
honeycomb surface.
4
The three thread locked nuts
lie underneath the bottom
plate...
2

www.larryvsharry.com
Contact your local dealer
if you need help or need more info