Larry vs Harry Canopy User manual

Canopy
Assembly Manual
by Larry vs Harry

Before you start
Things you need, to attach your brandnew Canopy
Bullitt with Honeycomb Board
1

5 MM
Hex/Allen key
Grease
(metal on metal)
Important message from Larry the King.
3 4
Larry the King says:
You think you are pro like me?!
Real pros read the
f***ing manual!
2
13 MM
Wrench/Spanner
Grease. Remember to grease or else your mechanic
will hate you later on. (“Muc-o” has a Bio Grease
that cares about the environment)
Ouch! Be careful, you could hurt your fingers.
Icons that will appear throughout the guide:

Components

1. Canopy Tent
2. Sidebars
3. Top

Two tips before you start attaching the Canopy
Step 1
B
A

Raise the handlebar to the max.
height to make room for the Canopy.
A
Before attaching the Canopy
frame, remove the two bolts inside
the Canopy. Use tools 1+2.
Grease the two bolts.
Screw the two bolts through both
Canopy frame and Bullitt frame
in Step 2.
B
Larry the King says:
“If you have bought the
Bullitt Foldable Seat and want
to attach it inside the Canopy,
you remove the bolts and
attach the Seat to
the back holes instead”

Fitting the Canopy onto the Bullitt frame
A
C
B
Step 2

Unfold the Tent, remove all strips
and place it on the Bullitt. Backside
of the tent facing the handlebar.
Drag the tent backwards towards
the handlebar.
Attach the velcro on the bicycle
frame. Remember to screw the two
bolts from Step 1 through both
Canopy frame and Bullitt frame.
Steering this way
Fit the hook (A) onto the frame and
the pin (B) into the back hole on the
bottom of the frame.
C
1
34
2
B
A
Like this.

Assembling the Roof bars
Step 3

1
3
2
Bend the bars on the roof of the
Canopy into position.
Be careful -you could cut your fingers!
Tighten the screws with Tool 3
(the Hex/Allen Key), and repeat on
the opposite side of the Canopy.
Bottom view.

Assembling the Sidebars
Step 4
A
B

Get your Sidebars. Unscrew the bolts. Notice
that the bolts are slightly dierent. The longer
bolts goes on the cargo area on the Bullitt frame.
Like this... ...not like this.
23
1
King Larry says:
“Fit the Sidebars right
or your ass will
have to be tight!
Urghhurgh!”

Attaching the Canopy Tent to the Sidebars
Step 5
A
B

Attach the flaps in the following order.
Voila! Finished!
Attach the velcro around the bar. Put the velcro strap through the hole.
12
And attach it like disssss!
34
5
1
2

Attach the Top to the Roof bars
Step 6

Zip the sides of the windows and
attach the velcro so its nice and tight.
Do it on both sides of the Canopy.
We make the only side entrance
Canopy in the universe and it has
a prize. The prize is patience.
Put the velcro straps through the
hole and attach it.
Repeat on the opposite side.
1
Bend the cover back and you are
good to go.
2 3
...This could happen!
Broken side window or zipper
could be the consequence...
24
hrs
24
Important notice
from Larry the King!
When you get to this stage,
the best thing is to leave the
Canopy rest for 24 hours.
It’s so the fabric can stretch.
If not patient...

Attaching the Top
Step 7

1
Get your Top and fit the holes (A) on to
the back of the canopy on both sides.
3
Stretch it forward and attach the holes
on each side to the taps on the front
of the Canopy.
4
Attach the velcro at the end of each
side to the Canopy.
5
Finito!
2
Roll it forward.
A
A

www.larryvsharry.com
Bullitt Shop Copenhagen
Frederiksborggade 43, DK–1371 Copenhagen, Denmark