Laser Technology TruPulse 200X User manual

LaserSoft® QuickMap 3D Android Quick Reference
Add Points to A Saved Survey
For TruPulse 200X or TruSpeed Sxb + TruAngle
And TruPoint 300

Add Points to a Saved Survey
TruPulse 200X or TruSpeed Sxb + TruAngle
1. Set up on the last instrument position occupied when the original survey was
mapped.
2. Power on all equipment.
3. Open QuickMap and tap [Saved Surveys].
4. Zero the TruAngle:
•If there was only one instrument position in the survey (the Origin), aim the
laser at the original reference point for the survey and zero the TruAngle on
that point.
•If there was more than one instrument position in the survey, aim the laser at
the previous instrument position (not the original reference) and zero the
TruAngle on that point. NOTE For help with zeroing a TruAngle, see Slide 21.
5. Begin adding new data points to the survey. To verify that you have correctly re-
entered the survey, shoot in a point that was mapped in the original survey. The
new point should be on top of or very close to the point shot in the original
survey.

Add Points to a Saved Survey (1 of 2)
TruPoint 300
1. Set up on the last instrument position occupied when the original survey was
mapped.
2. Power on all equipment.
3. Open QuickMap and tap [Saved Surveys].
4. Tap . Wait a few seconds for the laser to respond and prompt for the leveling
routine.
5. Level the TruPoint. See Slide 19 for more information on that procedure.
6. Long-press the icon to display the re-zeroing dialog. A short press on this icon
implements the routine for moving your instrument position. Ensure that you see
the dialog as displayed in Figure A that DOES NOT say “Move to Point.”

7. Zero the TruPoint 300:
•If there was only one instrument position
in the survey (the Origin), aim the laser at
the original reference point for the survey
and tap to zero the TruPoint on that
point.
•If there was more than one instrument
position in the survey, aim the laser at the
previous instrument position (not the
original reference) and tap to zero the
TruPoint on that point. The dialog will
display “Angle Zeroed” (Figure B).
8. Tap OK to return to the Data Collection screen.
9. Begin adding new data points to the survey. To
verify that you have correctly re-entered the
survey, shoot in a point that was mapped in the
original survey. The new point should be on top
of or very close to the point shot in the original
survey.
Add Points to a Saved Survey (2 of 2)
TruPoint 300
Figure A
Figure B

LTI Product Resources
Product Page/User’s Guides:
http://www.lasertech.com/QuickMap-3D-Mapping-Software.aspx
Follow us on Twitter @LaserTechSafety
Like us on Facebook:
https://www.facebook.com/LaserTechnologyInc
Subscribe to our YouTube Channel:
https://www.youtube.com/user/LaserTechTraffic
Stay informed! Find out about
Laser Technology products, updates,
and training resources by keeping
track of us on FaceBook, Twitter,
YouTube, and at lasertech.com.

Contact Laser Technology, Inc.
Questions regarding QuickMap 3D for Android or
other products built by Laser Technology, Inc?
Please contact us at:
1.800.280.6113 or
1.303.649.1000
[e-mail]
Laser Technology, Inc.
6912 S. Quentin St.
Centennial, CO 80112
www.lasertech.com