LaserPegs FORKLIFT PB 1420B User manual

Please read this manual before you begin!
Failure to follow this manual’s instructions may
result in damage to the Power Base and/or
Laser Pegs®. Not adhering to these instructions
will void the manufacturer’s warranty. The
packaging must be kept because it contains
important information.
To construct with Laser Pegs®, slide two pieces together to form
a connection. Slide each piece on and o smoothly.
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2014 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: Suppor[email protected]om
Allows you to connect to other
construction kits.
Use the Laser Pegs® Square M-M Peg to attach
the Tire Pegs to the Power Block™.
Tire
Axle Peg
MOBILE POWER BLOCK™
www.LaserPegs.com
Connecting Pegs
POWER BLOCK
POWER BLOCK™
MOBILE POWER
BLOCK™
Move the Power Switch to
cycle through the Power
Block light settings.
OFF/ON/FLASH
Power
Switch
Laser Pegs®
Connections
Connecting the Laser Pegs® Tire to the Axle Peg
Tire Peg
Laser Pegs® Square M-M Peg
Place Axle Peg
through the Tire
AVOID DAMAGE TO PEG HOLES
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 yrs.
Do not submerge in water.
All additional model instructions can
be downloaded at www.LaserPegs.com
MODEL INSTRUCTIONS
EN71, RoHS COMPLIANT
This product complies to
all safety requirements
of ASTM F 963
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won’t. When the Laser Pegs® dim, the Laser Pegs®
are not broken, they just need stronger batteries.
You have 2 simple options...
1. Change the batteries.
2. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more Laser Pegs® you connect!
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
the peg holes.
PB1420B
POWER BLOCK
Ages 5+
LIGHTED
MOBILE POWER BLOCK™ SET
INCLUDES:
• 100 Tinted Bricks
• 4 Tire Pegs
• 2 Square M-M Pegs
• 1 Mobile Power Block™
Requires 3 AAA Batteries
Batteries NOT
Included
Laser Pegs® Parts List
Tinted Bricks List
8 Models+
Any creation you can build
x2
Never connect more than 30 Laser Pegs®
to the Power Block at one time.
Requires 3-AAA Batteries
(Batteries Not Included)
1. Remove Screw.
2. Lift o Battery Compartment Cover.
3. Place three (3) AAA batteries in the correct
position - as displayed inside of the
Power Block.
4. Replace Battery Compartment Cover and
Screw.
5. Slide Power Switch setting to
OFF/ON/FLASH.
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
from the power base.
9. Never connect more than 30 Laser Pegs® at
one time!
10. Non-rechargeable batteries are not to be
recharged.
11. Rechargeable batteries are only to be
recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. Batteries are to be inserted with the
correct polarity.
14. The supply terminals are not to be short-
circuited.
15. DO NOT THROW BATTERIES INTO FIRE!
LIGHT SETTINGS
Allows you to construct
with Laser Pegs®.
Construction Part Connections
The Power Block is a Power Base that allows you to build with Laser Pegs®
and construction parts to build models that light up. It is battery operated.
(BATTERIES NOT INCLUDED.)
OFF - Turns lights OFF
ON - Turns lights ON
FLASH - Makes lights FLASH
Battery
Compartment
Battery
Compartment
Cover
Requires 3-AAA Batteries
SQUARE
M-M PEG
TIRE PEG
x2
x1
x1
x2
x6
x8
x2
x4
Each Laser Peg® is color coded on the circuit board inside
each shape.
Color
Code
x2
x2
x2
x2
x8
x2
x4
x4
x4
x2
x2
x2 x2
x8
x2
x2
x8
x2
x4
x4
x4
x2
x4
Screw
Tire Peg
Battery
Compartment
Construction
Series
Batteries NOT
Included
Remove the Phillips head screw
with a 4mm screw driver.
Requires 3-AAA Batteries
Replacing Batteries
DO NOT SUBMERGE IN WATER
WARNING: STROBE LIGHTS
MAY CAUSE SEIZURES
+
+
+
+
-
-
-
-
The toy is not to be connected to more than
the recommended number of power supplies
This Product contains a button battery. If swallowed, it could
cause severe injury or death in just 2 hours.
Seek medical attention immediately.
WARNING: STROBE LIGHTS
MAY CAUSE SEIZURES

Connecting the Laser Pegs® Tire to the Axle Peg
Battery
Compartment
3
STEP
4
STEP
5
STEP
6
STEP
7
STEP
8
STEP
9
STEP
10
STEP
11
STEP
12
STEP
13
STEP
Environmental Phenomena
* The unit may malfunction if subjected to radio-frequency interference. It SHOULD revert to normal operation when the interference stops. If
not, it may become necessary to turn the power o and back on, or remove and reinstall the batteries. * In the unlikely event of an electrostatic
discharge, the unit may malfunction and lose memory, requiring the user to reset the devise by removing and reinstalling the batteries.
MADE IN CHINA
1
STEP
2
STEP
A
B
C
Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
Model
Diculty
Level
BULLDOZER
BULLDOZER: With a weight of over 183 tons, the ACCO Super Bulldozer is the largest bull-
dozer ever built.
The TRY-ME mechanism is for display purposes ONLY and should be
discarded as per state and local regulations. It is NOT intended to be
used for the building of this model.

Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
D
E
20
STEP
21
STEP
26
STEP
27
STEP
23
STEP
24
STEP
25
STEP
18
STEP
19
STEP
14
STEP
16
STEP
15
STEP
17
STEP
COMBINE C
22
STEP

Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
F
42
STEP
34
STEP
35
STEP
36
STEP
37
STEP
38
STEP
COMBINE A
39
STEP
40
STEP
28
STEP
29
STEP
30
STEP
31
STEP
32
STEP
33
STEP
41
STEP
43
STEP

Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
COMBINE B
47
STEP
48
STEP
49
STEP
50
STEP
44
STEP
51
STEP
45
STEP
52
STEP
46
STEP
53
STEP

Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
All additional model instructions can
be downloaded at www.LaserPegs.com
MODEL INSTRUCTIONS Laser Pegs® CARES
Questions? Comments?
For additional compliance info:
1-866-432-3735
Contact: Suppor[email protected]
MADE IN CHINA
Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
BACKHOE
CLAW CRANE
DUMP TRUCK
EXCAVATOR
FOREMAN UTILITY TRUCK
FORKLIFT
CRANE TRUCK
Slide the switch to Light It Up
OFF - Turns lights OFF
ON - Turns lights ON
FLASH - Makes lights FLASH
55
STEP
COMBINE D
COMBINE E
54
STEP