Laserworld Fogscreen UP User manual

Fogscreen
UP
User Manual
Please read this manual carefully before use!

User Manual: Laserworld Fogscreen UP
Stand: 05/ 008
Page
of
5
Table of Contents
Page
Attention 3
Technical Facts 3
Please note 4
Pictures 5
EU- Declaration of Conformity 5

User Manual: Laserworld Fogscreen UP
Stand: 05/ 008
Page
3
of
5
Attention
1. Do not open the frame arbitrarily. If the equipment should exhibit a
disturbance, please let it examine from a service technician. When arbitrary
opening the equipment the warranty claim can expire!
. Operate the equipment only in accordance with this manual.
3. Do not operate the Equipment by high air humidity, rain or in dusty
environment.
4. Do not use the equipment, if visible damages at the housing or at the
connection fields/leads are present.
5. If disturbances at the equipment should arise, contact please your dealer or our
support directly.
Technical Facts:
Item: AOTE-WP002X
•Spray type: Upward spray
•Screen area: 2M×2-4M
•Power supply: AC 110V～ 240V
•Power: 2KW
•Water consumption: 8~15L/H
•Fog screen generator size: 2.1x0.55x0.0.55
•G.W: 110 KG
•Projection required: at least 4000 lumen

User Manual: Laserworld Fogscreen UP
Stand: 05/ 008
Page
4
of
5
Pictures:
PLEASE NOTE
This device has left our premises in absolutely perfect condition. In order to maintain
this condition and to ensure a safe operation, it is absolutely necessary for the user
to follow the safety instructions and warning notes written in this user manual.
Laserworld cannot be made liable for damages caused by incorrect installations and
unskilled operation!

User Manual: Laserworld Fogscreen UP
Stand: 05/ 008
Page
5
of
5
EU- Declaration of Confor ity
We hereby confirm that the following device
Laserworld Fogscreen UP
complies with the essential safety requirements, laid down in the regulations of the
committee to assimilate the provisions of law of all participating EU states on the
electromagnetic compatibility (98/336/EWG).
The device has been classified considering the following EU-norms on
electromagnetic compatibility:
DIN EN 55103-1: 1996
DIN EN 55103- : 1996
DIN EN 61000-3- : 000 + A : 005
DIN EN 61000-3-3:1995 + A1: 001
Assessment of compliance of the product with the requirements relating to the Low Voltage
Directive (LVD) was based on the following standards:
DIN EN 60065 : 00
Furthermore, the device is verified in correspondence to the laser class regulations DIN EN
608 5-1, if properly set up according to the upper mentioned laser safety regulation.
After installing the device, an inspection and official approval is indispensable for the overall
setup. The inspection must follow the european guidelines EN 608 5-1 and corresponding
regulations for the prevention of accidents BGV-B .
This declaration is executed on behalf of the Laserworld Fogsreen UP manufacturer.
Laserworld (Switzerland) AG
Oberstrasse 1
8 74 Tägerwilen
SWITZERLAND
Authorized person:
Supervisory board Ms Rhea Gössel
place of business: 8 74 Tägerwilen / SWITZERLAND
company number: CH-440.3.0 0.548-6
Commercial Registry Kanton Thurgau
www.laserworld.com
[e-mail]
representative according to EMVG:
Cleantech Europe GmbH
Managing Director: Thomas Schulze
Fürkhofstr. 5
819 7 München / DE