Setup Software Connection
The screens below indicate the fi rst few key steps in setting up your software
connection. (For more detailed instructions see the User’s Guide).
8
a
b
a.
Open your PayClock Software on your computer.
Click on the “Terminal Manager” tab.
Then click on the “Add Terminal” button located
in the top left corner of the screen.
b.
Select “FaceIN“ and click OK to continue.
c.
Type in the name or location identifi er that you
want to use to identify the FaceIN terminal
in the text box next to Device Nickname.
d.
In the IP Address box enter the IP Address you
entered into the terminal and then click Save.
e.
Click the “Test Connection” button to verify the
communications between the PayClock software
and the terminal. A confi rmation screen
will pop up, click OK to continue.
f.
Select the “Settings Tab” and click the “Set”
button to send the time / date to the terminal.
g.
Click on the “Update Selected Terminal”
button on the Ribbon Bar. This will send your
employee data to the device.
9Enroll Employee Faces
Once you have successfully updated the FaceIN Terminal with your employees,
you can begin enrolling employee faces.
a.
From the main home screen, press the key. The Administrator must present their face.
b.
Press the key on the keypad to access the User Management Menu.
c.
Press the key on the keypad to Modify User.
d.
Enter the PIN Number of the employee you want to enroll and press the key.
e.
Their name will be displayed, press the key.
f.
Press the key to select Face as the verify method.
g.
Enroll the employees face using the Face Enrollment Tips provided.
h.
When “Permit Open Door” is displayed press the key. (This Step is for FR700 Terminals only)
i.
When “Permit Attendance” is displayed press the key.
j.
Complete these steps until all employees are enrolled.
k.
Once all employees are enrolled press the key multiple times to return to the
home screen and begin clocking employees In.
