LawnMaster CLGT1018B01 User manual

CLGT1018B01
Operators Manual / Guide d'Utilisation / Manual del operario
Read all safety rules and instructions carefully before operating this tool.
Distributed By Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432
Lisez toutes les règles et consignes de sécurité avant d'utiliser cette tondeuse.
Distribuée par Cleva North America 601 Regency Park Court, Greenville, SC 29607 (866)-384-8432
Lea cuidadosamente todas las normas de seguridad e instrucciones antes de utilizar esta herramienta.
Distribuidapor Cleva North America 601 Regency Park Court, Greenville, SC 29607 (866)-384-8432
18V-10" Li-ion Cordless Grass Trimmer CLGT1018B01
EN p. 2
Coupe-gazon sans fil CLGT1018B01 de 254 mm (10 po) à
batterie lithium-ion 18 V
FR p. 28
Bordeadora de césped inalámbrica CLGT1018B01 - 10" con
batería Li-ion 18V
SP p. 54

Type Cordless, Battery-Powered
Battery 18vd.c., 1.5ah Lithiium-ion
Rated No Load Speed 8000 Min-1
Cutting Device Trimfast Blade
Cutting Width 10”
Weight 5.5 Lbs With Battery
2
CONTENTS 2
PRODUCT SPECIFICATIONS 2
GENERAL SAFETY RULES 3-4
ELECTRICAL INFORMATION 5
SYMBOLS 6-7
NOW YOUR CORDLESS GRASS TRIMMER 8
ASSEMBLY 9-11
BATTERY CHARGER 12-13
OPERATION 14-19
MAINTENANCE 20
TROUBLESHOOTING 21
MAINTANCE 22
ENVIRONMENTALLY SAFE BATTERY DISPOSAL 23
WARRANTY 24
EXPLODED VIEW 25
PARTS LIST 26
NOTES 27
CONTENTS
PRODUCT SPECIFICATIONS
18V LITHIUM-ION CORDLESS GRASS TRIMMER
Model No 18LC02-ETL
Rated Input Voltage 120VAC 60Hz
Rated Output c 20.8V
Rated Output Current 300 m A
Charging Time Approx. 3-5 Hours
Charger

3
GENERAL SAFETY RULES
WARNING
Read and understand all instructions before using this product. Failure to follow all

liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
Do not allow children or untrained individuals to use this unit.
Don’texposepowertoolstorainorwetconditions.Waterenteringapowertoolwillincrease
theriskofelectricshock.
Donothandleplugortoolwithwethands.
Neverallowchildrentooperatetheequipment.Neverallowadultstooperatetheequipment
without proper instruction.
Alwayswearsafetyglasseswithsideshields.Everydayglasseshave only impact resistant
lenses.TheyareNOTsafetyglasses.Followingthisrulewillreducetheriskofeyeinjury.Use
face mask if operation is dusty.
Weareyeprotectionwhenoperatingthisproduct.Securelonghairaboveshoulderlevelto
prevent entanglement in moving parts.
Donotexposetorain,storeindoors.
Do not operate in poor lighting.
Keep all parts of your body away from any moving part.

Wearheavylongpants,boots,andgloves.Avoidloosegarmentsorjewelrythatcouldget
caught in moving parts of the machine or its motor.
Do not force tool. Use the correct tool for your application. The correct tool will do the job
betterandsaferattherateforwhichitisdesigned.
Do not operate the equipment while barefoot or when wearing sandals or similar lightweight
footwear.Wearprotectivefootwearthatwillprotectyourfeetandimproveyourfootingon
slippery surfaces.
Securelonghairsoitisaboveshoulderleveltoprevententanglementinanymovingparts.

Donotallowtobeusedasatoy.Closeattentionisnecessarywhenusedbyornearchildren.
Donotusetoolifswitchdoesnotturnitonoroff.Anytoolthatcannotbecontrolledwiththe
switch is dangerous and must be repaired.
Keep all bystanders, children, and pets at least 50 ft. away.

medication.
Do not operate in poor lighting.

4
GENERAL SAFETY RULES
Keepallpartsofyourbodyawayfromanymovingpartsandallhotsurfacesoftheunit.
Donotputanyobjectintoopenings.Donotusewithanyopeningblocked;keepopeningsfree
Check the work area before each use. Remove all objects such as rocks, broken glass, nails,
wire,orstringwhichcanbethrownorbecomeentangledinthemachine.
Useonlyidenticalmanufacturer’sreplacementpartsandaccessories.Useofanyotherparts
may create a hazard or cause product damage.
Donotchargebatterytoolinrain,ordamporwetlocation.Followingthisrulewillreducethe
risk of electric shock.
Forhouseholduseonly.
Batterytoolsdonothavetobepluggedintoanelectric
al outlet; therefore, they are always in
operatingcondition.Beawareofpossiblehazardswhennotusingyourbatterytoolorwhen
personal injury.
Remove or disconnect battery before servicing, cleaning or removing material from the
gardening appliance.
Use only this type and size batteries provided by us.
Storeidleappliances-Whennotinuse,blowershouldbestoredindoorsinadry,locked
place out of the reach of children.

possible special disposal instructions.
Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause
damagetotheeyesorskin.Itmaybetoxicifswallowed.

explosion and possibly injury.
Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce
theriskofseriouspersonalinjury,neveruseanycordlessproductinthepresenceofopen
immediately.
Donotcrush,dropordamagebatterypack.Donotuseabatterypackorchargerthathas
been dropped or received a sharp blow. A da maged battery is subject to explosion. Properly
dispose of a dropped or damaged battery immediately.
Exercise care in handling batteries in order not to short the battery with conducting materials
suchasrings,bracelets,andkeys.Thebatteryorconductormayoverheatandcauseburns.
Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause
damagetotheeyesorskin.Itmaybetoxicifswallowed.
Forbestresults,yourbatterytoolshouldbechargedinalocationwherethetemperatureis
morethan50°Fbutlessthan100°F.Toreducetheriskofseriouspersonalinjury,donotstore
outsideorinvehicles.
Underextremeusageortemperatureconditions,batteryleakagemayoccur.Ifliquidcomesin
contact with your skin, wash immediately with soap and water, then neutralize with lemon juice
then seek immediate medical attention. Following this rule will reduce the risk of serious
personal injury.

5
ELECTRICAL INFORMATION
Ifthepowersupplycordisdamaged,itmustbereplacedonlybythemanufacturerorbyan
authorizedservicecentertoavoidrisk.
Do not point the blower nozzle in the direction of people or pets.
Neverruntheunitwithouttheproperequipmentattached.Alwaysensurethesweepertubes
are installed.
Whennotinuse,blowershouldbestoredindoorsinadry,lockedupplace—outofthereach
of children.
Maintaintoolwithcare.Keepfanareacleanforbestandsafestperformance.Follow
unplugging it.
Toreducetheriskofelectricalshock,donotexposetorain,donotuseonwetsurfaces.Store
indoors.
Savetheseinstructions.Refertothemfrequentlyandusethemtoinstructotherswhomay
usethispowertool.Ifyouloansomeonethispowertool,loanthemtheseinstructionsalso.
W A R N I N G (PROPOSITION 65)
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement and other masonry products, and
Arsenicandchromiumfromchemicallytreatedlumber.
Your risk of exposure to these chemicals varies depending on how often you do this type of
work. To reduce your exposure to these chemicals, work in a well-ventilated area, and work with
particles.
CHILD SAFETY
Tragicaccidentscanoccuriftheoperatorisnotawareofthepresenceofchildren.
Keep children out of the working area and under the watchful care of a responsible adult.
Donotallowchildrenundertheageof14tooperatethishedger.Childrenwhoare14
yearsofageandoldermustreadandunderstandtheoperatinginstructionsandsafety
rulesinthismanualandmustbetrainedandsupervisedbyaparent.
Stay alert, and turn the hedger off if a child or any other person enters the working area.
Look behind and down for small children before and while cutting backwards.
Use extreme care when approaching blind corners, doorways, shrubs, trees, or other
objectsthatmayobscureyourviewofachildwhomayrunintothepathofthehedger.

6
SYMBOLS
On the product, the rating label and within these instructions you will find among others he following
symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries
and damage to property.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
No Load Speed Rational speed, at no load
/min Per Minute Revolutions, strokes, surface speed, orbits etc.,
per minute
Wet Conditions Alert Do not expose to rain or use in damp locations
Read The Operator’s Manual
To reduce the risk of injury user must read and
understand operator’s manual before using this
product.
Eye Protection Wear eye protection when operating
this equipment.
Safety Alert Precautions that involve your safety.
Long Hair Failure to keep long hair away from the air inlet
could result in personal injury.
Loose Clothing Failure to keep loose clothing from being drawn
into air intake could result in personal injury.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.

7
The following signal words and meanings are intended to explain the levels of risk associated
with this product.
SERVICE
service technician. For service we suggest you return the product to your nearest AUTHORIZED
SERVICE CENTER for repair. When servicing, use only identical replacement parts.
WARNING
To avoid serious personal injury, do not attempt to use this product until you have read this Owner's
Manual thoroughly and understand it completely. If you do not understand the warnings and
instructions in this Owner's Manual, do not use this product. Call the Toll-free Helpline (866)-384-
8432 for assistance. The operation of any power tool can result in foreign objects being thrown
into your eyes, which can result in severe eye damage. Before operating a power tool, always wear
safety goggles, safety glasses with side shields, or a full face shield when needed. We recommend
a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always use eye protection that is marked to comply with ANSI Z87.1.
WARNING
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and, when needed, a full face
shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shields. Always use eye protection which is marked to comply
with ANSI Z87.1.
DANGER Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION (Without Safety Alert Symbol) Indicates a situation that may
result in property damage.
SYMBOLS
SAVE THESE INSTRUCTIONS
SYMBOL SIGNAL MEANING

8
KNOW YOUR CORDLESS GRASS TRIMMER
KNOW YOUR PRODUCT
The safe use of this product requires an understanding of the information on the product and in
this operator’s manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.
1. Main handle
2. Rear safety guard
3. On/off switch
4. Unlock button
5. Battery pack
6. Auxiliary handle
7. Storage compartment
8. Quick release knob
9. Handle support
10. Angle adjustment button
11. Locking sleeve (length adjustment)
12. Telescopic pole
All reference numbers above are used throughout the manual to indicate an action.
13. Tilt adjust pivot point
14. Safety guard
15. Mounting screws (pre-assembled)
16. Cutting device (TrimFast Blades)
17. Flower Guard
18. Air vents
19. Trimmer head
20. Power cord with plug
21. Charger
22. Release button
23. Button for battery capacity
24. Indicator lights (battery pack)
1
23
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 21
22
2324

ASSEMBLY
9
All referenced numbers are indicated on page 7.
Attaching Guard (See fig. 1)
Fig.1
Align the guard (14) with the trimmer head (19).
Secure it by tightening the three mounting screws (15) with a screwdriver (Fig. 1).
WARNING! Never use the product without the guard properly fitted.
/RRVHQWKHTXLFNUHOHDVHNQREDQWLFORFNZLVHDQGUHPRYHLWIURPWKHDX[LOLDU\KDQGOH
$OLJQWKHDX[LOLDU\KDQGOHZLWKWKHKDQGOHVXSSRUW0DNHVXUHWKHVWRUDJHFRPSDUWPHQW
(7) faces upward.
,QVHUWLQWKHTXLFNUHOHDVHDQGWLJKWHQFORFNZLVHE\KDQG
Attaching and Adjusting Auxiliary Handle (See figs. 2-7)
Fig.2 Fig.3

10
ASSEMBLY
$GMXVWWKHDX[LOLDU\KDQGOHWRGHVLUHGSRVLWLRQ
7LJKWHQWKHTXLFNUHOHDVHFORFNZLVHDQGFODPSWKHOHYHUGRZQWRVHFXUHLW)LJ
Attaching or Replacing TrimFast Blade (See figs. 9-11)
Fig.9 Fig.10
Fig.7 Fig.8
3ODFHWKHZLGHUH\HOHWRIFXWWLQJEODGHRYHUWKHPHWDOVWXGDQGILUPO\SXOOXQWLOEODGHLVFRPSOHWHO\
seeded on stud.
5HPRYHLQRSSRVLWHRUGHU
NOTE! Only tighten the quick release knob so that it is possible to clamp the lever down with light
pressure. If the lever cannot be clamped, slightly loosen the quick release knob. If the lever can be
clapped without resistance, tighten the quick release knob.
WARNING!
Always remove the battery prior to changing blades. Failure to do so, can cause serious injury!
Fig.11
Fig.4 Fig.5 Fig.6

11
ASSEMBLY
Store the TrimFast cutting blades in the (16) storage compartment (7) found on the auxiliary
handle (6).
Storage of cutting device (See fig. 12)
NOTE: This kind of trimming blade can be used from two sides. For the first replacemen turn the
blade over and refit it. If both sides of a blade are worn out, replace with a new blade.
3UHVVWKHUHOHDVHEXWWRQRQWKHEDWWHU\SDFNDQGUHPRYHLWIURPWKHSURGXFW)LJ
$OLJQWKHEDWWHU\SDFNWRWKHVORWVDWWKHERWWRPVLGHRIWKHUHDUVDIHW\JXDUGDQGVOLGHLWLQ
until it locks in place (Fig. 14).
Attaching and Removing the Battery Pack (See figs. 13-14)
Fig.12
Fig.13 Fig.14

12
BATTERY CHARGER
BECOME FAMILIAR WITH THE CHARGER
Beforeattemptingtousethischarger,becomefamiliarwithallofitsoperatingfeaturesand
safety requirements.
1. Power cord with plug
2. Charger
(See Figure 6.)
Fig. 6
CHARGING THE BATTERY PACK (See Figure 7.)
WARNING
BATTERY CHARGING PROCEDURE:
1. Align the battery pack (2) to the slots on the
charger (1) and slide it in until it locks in place
2. Connect the charger (1) to the power supply.
3. Allow sufficient charging time (3-5 hours), and then
disconnect the charger from the power supply.
4. Press the release button on the battery pack and
remove battery from charger.
NOTE: It is normal for the battery pack and charger
to become warm (but not hot) during charging process.
If the battery does not charge properly, check to make
sure the electrical outlet is "live".
NOTE: Always charge the battery before storage!
To reduce risk of fire, never leave the battery
connected with the charger for more than 24 hours!
2
2
1
1
,IDQ\SDUWRIWKHFKDUJHULVPLVVLQJRUGDPDJHGGRQRWRSHUDWHLWXQWLOWKHSDUWLVUHSDLUHGRU
replaced. Failure to heed this warning could result in possible serious injury.
Check the voltage! The voltage must comply with the information on the rating label!
Fig. 7

13
B
ATTERY CHARGER
CHARGER INDICATORS
BATTERY LED INDICATORS (SEE FIGS. 17-18)
STARTING AND STOPPING
indicator lights
23
(24)
Low capacity High
Fig. 18
sutatS)22(sthgilrotacidnIlobmyS
red,
blinking
technical
defect
red,
continuous charging
green,
continuous
fully
charged
Fig. 17

14
OPERATIO
N
Intended Use
On/off Switch (See fig. 19)
3UHVVWKHXQORFNEXWWRQRQHLWKHUVLGHDQGKROGLWLQSRVLWLRQ
3UHVVWKHRQRIIVZLWFKWRVZLWFKWKHSURGXFWRQ)LJ
5HOHDVHWKHRQRIIVZLWFKWRVZLWFKWKHSURGXFWRII
This grass trimmer CLGT1018B01 is with rated battery voltage of 18 V . 18LC02-ET
L
designates the respective charger with a charging voltage of 20.8 V .
The product is intended for cutting weed, grass or similar soft vegetation in areas that are hard to
reach, e.g. under bushes, on slopes and edges. It may not be used to work on unusual thick, dry or
wet grass, e.g. pasture grass, or to shred leaves.
This product is intended for private domestic use only, not for any commercial trade use. It must not
be used for any purposes other than those described.
Fig. 19
43
Adjusting Shaft Length (See figs. 20-21)
Adjust the length to suit your height. We recommend always using the product with the pole fully
extended (12).
/RRVHQWKHORFNLQJVOHHYHLQDQDQWLFORFNZLVHGLUHFWLRQ
3XOOWKHWHOHVFRSLFSROHWRGHVLUHGOHQJWK
7LJKWHQWKHORFNLQJVOHHYHLQDFORFNZLVHGLUHFWLRQ
Fig. 20
fully extended
Fig. 21
Retracted

15
OPERATION
Adjust the angle of the trimmer head (19) according to the intended operation.
3XOOWKH$QJOHDGMXVWPHQWEXWWRQEDFNZDUGDQGKROGLWLQSRVLWLRQ)LJ
$GMXVWWRGHVLUHGSRVLWLRQ$GMXVWWRZKHQWULPPLQJJUDVVRQIODWJURXQG)LJ$GMXVWWR
90° or 180° when trimming near edges and walls (Fig. 23, 24).
Adjusting Power Head Angle (See figs. 22-24)
Adjust the trimmer head (19) to a suitable angle (Fig. 25-27). The joint has several snap-in
positions between 0° and 90°.
With guard on ground, place foot on top of guard, adjust tilt by pushing either up or down on the
shaft to tilt.
Power Head Tilt Adjustment (See figs. 25-27)
(QVXUHWKDWWKH$QJOHDGMXVWPHQWEXWWRQVQDSVLQSODFH
Fig. 25 Fig. 26 Fig. 27
0°
90°
WARNING! Always ensure that the Angle adjustment button snaps in place! Only adjust
to indicated angles! Never adjust to any other intermediate position.
Fig. 24, 180°
Fig. 22, initial position 0° Fig. 23, 90°

16
OPERATION
Flower Guard (See figs. 28-29)
Use the yoke to keep distance to obstacles that could be hit by the cutting device.
Ɣ3XVKWKH)ORZHU*XDUGWRLWVRXWHUSRVLWLRQIRURSHUDWLRQXQWLOLWVQDSVLQWRSODFH)LJ
Ɣ3XVKWKH)ORZHU*XDUGWRLWVLQQHUSRVLWLRQDIWHURSHUDWLRQDQGZKHQVWRULQJ)LJ
Ɣ&KHFNWKHSURGXFWLWVEDWWHU\SDFNDQGFKDUJHUDVZHOODVDFFHVVRULHVIRUGDPDJHEHIRUHHDFK
use. Do not use the product if it is damaged or shows wear.
Ɣ'RXEOHFKHFNWKDWDFFHVVRULHVDQGWULPPLQJEODGHVDUHSURSHUO\IL[HG
Ɣ$OZD\VKROGWKHSURGXFWE\LWVKDQGOHV.HHSWKHKDQGOHVGU\WRHQVXUHVDIHVXSSRUW
Ɣ(QVXUHWKDWWKHDLUYHQWVDUHDOZD\VXQREVWUXFWHGDQGFOHDU&OHDQWKHPLIQHFHVVDU\ZLWKDVRIW
brush. Blocked air vents may lead to overheating and damage the product.
Ɣ6ZLWFKWKHSURGXFWRIILPPHGLDWHO\LI\RXDUHGLVWXUEHGZKLOHZRUNLQJE\RWKHUSHRSOHHQWHULQJ
the working area. Always let the product come to complete stop before putting it down.
Ɣ'RQRWRYHUZRUN\RXUVHOI7DNHUHJXODUEUHDNVWRHQVXUH\RXFDQFRQFHQWUDWHRQWKHZRUNDQG
have full control over the product.
General Operation
Trimming
Ɣ'RQRWFXWZHWJUDVVEHFDXVHLWWHQGVWRVWLFNWRWKHFXWWLQJPHDQVDQGJXDUGSUHYHQWVSURSHU
discharge of grass clippings, and could cause you to slip and fall.
Ɣ:DLWXQWLOWKHSURGXFWKDVFRPHWRDVWDQGVWLOOEHIRUHSODFLQJLWGRZQ
Ɣ5HJXODUO\UHPRYHFOLSSLQJVDQGGLUWDURXQGWKHWULPPHUKHDGZLWKDVZLWFKHGRIISURGXFW
Fig. 28, working position Fig. 29 , storing position
WARNING! Adjust the Flower Guard position only when the product is switched off and
the cutting device is at a complete stop!

1
7
O
PERATI
ON
Ɣ3D\DWWHQWLRQZKHQSHUIRUPLQJZRUNFORVHWRWUHHVDQGEXVKHV7KHFXWWLQJGHYLFHFDQGDPDJH
sensitive bark, and damage fence posts.
Ɣ:RUNUK\WKPLFDOO\6WDQGILUPO\ZLWK\RXUIHHWDSDUW&XWIURPULJKWWROHIWVRWKHWULPPLQJVZLOOEH
thrown away from the work area (Fig. 30).
Ɣ'RQRWPRYHWKHSURGXFWWRRIDVWDVWKLVZLOOUHVXOWLQLQHIIHFWLYHFXWWLQJDQGSRVVLEOHGDPDJH
Ɣ&XWUHSHDWHGO\IURPXSDQGGRZQLQOD\HUVZKHQWKHJUDVVLVYHU\KLJK)LJ
Ɣ.HHSWKHWULPPHUKHDGDWDQDQJOHRIDERXWWRWKHJURXQGZKHQWULPPLQJ$YRLGSUHVVLQJLW
against the ground as this can ruin the lawn and damage the product (Fig. 33).
Fig.32Fig.31
Fig.30

18
O
PERATI
O
N
Ɣ$GMXVWWKHWULPPHUKHDGDQJOHZKHQWULPPLQJRQHGJHV
Use the Flower Guard to avoid bringing the cutting device into contact with hard objects such as
walls and curbs. (Fig 35)
Ɣ&DUHIXOO\PDQHXYHUWKHSURGXFWDURXQGREMHFWVVXFKDVWUHHVDQGEXVKHVHQVXULQJLWGRHV
not come into contact with them. Use the Flower Guard to ensure that the cutting device does
not come into contact with sensitive plants (Fig. 34).
NOTE: Let the cutting device do the work. Let it work at its own pace, never
force it into the area to be cut.
Fig. 33
Fig. 34
17
Fig. 35

19
OPERATION
Ɣ6ZLWFKWKHSURGXFWRIIUHPRYHWKHEDWWHU\EDFNDQGOHWLWFRROGRZQ
Ɣ&KHFNFOHDQDQGVWRUHWKHSURGXFWDVGHVFULEHGEHORZ
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents
or disinfectants to clean this product as they might be harmful to its surfaces.
AFTER USE
Ɣ.HHSWKHJXDUGFOHDQDQGIUHHRIGHEULV5HPRYHWULPPLQJV
Ɣ5HSODFHWKHJXDUGZLWKDRQHRIWKHVDPHW\SHZKHQLW¶VZRUQRUVKRZVGDPDJH
Ɣ&OHDQWKHSURGXFWZLWKDGU\FORWK8VHDEUXVKIRUDUHDVWKDWDUHKDUGWRUHDFK
Ɣ,QSDUWLFXODUFOHDQWKHDLUYHQWVDIWHUHYHU\XVHZLWKDFORWKDQGEUXVK
Ɣ5HPRYHVWXEERUQGXVWZLWKKLJKSUHVVXUHDLUPD[EDU
Ɣ&KHFNIRUZRUQRUGDPDJHGSDUWV5HSODFHZRUQSDUWVDVQHFHVVDU\RUFRQWDFWDQDXWKRULVHG
service centre for repair before using the product again.
Ɣ.HHSWKHFXWWLQJGHYLFHFOHDQDQGIUHHRIGHEULV5HPRYHWULPPLQJV
Ɣ5HSODFHWKHFXWWLQJGHYLFHZLWKDRQHRIWKHVDPHW\SHZKHQLW¶VZRUQRUVKRZVGDPDJH
GENERAL CLEANING
CUTTING DEVICE
CHARGER
GUARD
Ɣ,IWKHSRZHUFRUGRIWKHFKDUJHULVGDPDJHGLWPXVWEHUHSODFHGE\WKHPDQXIDFWXUHULWVVHUYLFH
agent or similarly qualified persons in order to avoid a safety hazard.
WARNING! Wear safety gloves when working on the cutting device
and close to it! Use appropriate tools to remove debris e.g. a brush or
wooden stick! Never use your bare hands!

20
Ɣ7KLVSURGXFWGRHVQRWFRQWDLQDQ\SDUWVWKDWFDQEHUHSDLUHGE\WKHFRQVXPHU
Contact a qualified specialist to have it checked and repaired.
MAINTENANCE
REPAIR
Ɣ&OHDQWKHSURGXFWDVGHVFULEHGDERYH
Ɣ6WRUHWKHSURGXFWDQGLWVDFFHVVRULHVLQDGU\IURVWIUHHSODFH
Ɣ$OZD\VVWRUHWKHSURGXFWLQDSODFHWKDWLVLQDFFHVVLEOHWRFKLOGUHQ7KHLGHDOVWRUDJHWHPSHUD
ture is between 50 and 86 degrees F.
Ɣ:HUHFRPPHQGXVLQJWKHRULJLQDOSDFNDJHIRUVWRUDJHRUFRYHULQJWKHSURGXFWZLWKDVXLWDEOH
cloth to protect it against dust.
STORAGE
Ɣ6ZLWFKWKHSURGXFWRIIDQGUHPRYHWKHEDWWHU\SDFNEHIRUHWUDQVSRUWLQJLWDQ\ZKHUH
Ɣ$WWDFKWUDQVSRUWDWLRQJXDUGVLIDSSOLFDEOH
Ɣ$OZD\VFDUU\WKHSURGXFWE\LWVKDQGOHV
Ɣ3URWHFWWKHSURGXFWIURPDQ\KHDY\LPSDFWRUVWURQJYLEUDWLRQVZKLFKPD\RFFXUGXULQJWUDQVSRUWD
tion in vehicles.
Ɣ6HFXUHWKHSURGXFWWRSUHYHQWLWIURPVOLSSLQJRUIDOOLQJRYHU
TRANSPORTATION
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.