LAX-MAX LI-E30116BT User manual

USER'S MANUAL
*The picture is only provided for reference. Please refer to the actual unit!
GETTING STARTED
Please read this user 's manual carefully before using the product to make a
correct use of all functions and know well about the system connection and
usage. Please keep this manual in a safe place for future reference.
INTRODUCTION
This Bluetooth® earphone will allow you to listen to your music wirelessly from
your mobile phone, tablet or other Bluetooth®enabled device. It delivers
powerful and clear sound. The built-in microphone will allow you to answer
calls from mobile phone.
WARNING
Prolonged use of earphones at high volume may cause irreparable hearing
loss. We strongly advise you to adjust your listening volume to a reasonable
level. The higher the volume, the more you risk damaging your hearing
quickly.
We also recommend you to use your earphones responsibly! It is dangerous
or even illegal in some areas, to use earphones in situations that require your
full attention, such as driving a car, motorcycle or bicycle, but also as a
pedestrian when crossing the street, etc.
PRECAUTIONS
BLUETOOTH HEADSET

First thank you for buying this Sport Bluetooth®earphone. Please refer to this
Users’ Manual before use to use it properly. The contents stated herein may
be modified from time to time for better service as the product properties and
functions are changed without prior notice. For the sound performances of the
product, never use it in too cold, too hot, too dusty or humid places, especially:
1. Moist or underwater conditions
2. Near the heater or hi-temperature services or solarization
3. Places apt to fall
4. Never disassemble the combination audio; otherwise, it may invalidate the
warranty.
Key description
1: Multi-function button (MFB) : “-”Power on/power off/answer a call/end
a call/reject a call/ pause/play music
2: “+” button: Short press to increase volume; Long press for Next track
3: “-” button: Short press to decrease volume; Long press for Previous
Track
4: Built-in microphone
5 Charging port
FUNCTION OF LED INDICATOR
A. When charging
RED LED is on when the battery is charging.
RED LED is off when battery charge is finished.
B. When using the earphone
RED and BLUE LED blink alternately when the earphone is in pairing mode.
Stand By mode: the LED rapidly flashes BLUE.
Music playback mode: LED flashes slowly in BLUE.
RED LED blinks with sound alert when the battery has low power.
CHARGING BATTERY
The earphone comes with a built in rechargeable battery. Before using it for the first
time we recommend you charge the battery fully. Only use the supplied USB Cord to
charge the earphone. Please charge for 1 hours.

Connect the micro USB connector of the charging cable into the micro USB port on
the side of the earphone. Connect the other end of the USB cable to your computer’s
USB port or to an optional USB wall charger (not included)
The RED LED indicator light is illuminated.
The BLUE LED indicator light on when the earphone is fully charged.
SWITCHING ON / OFF
Switch ON : Press and hold the MFB for 3 seconds, until the LED flashes BLUE. You
will hear a tone voice“du”in the earphone.
Switch OFF: Press and hold the MFB for 3 seconds, until the LED flashes RED. You
will hear a tone voice “du”in the earphone.
PAIRING INSTRUCTIONS
You need to pair the earphone with your Bluetooth® enabled device (smartphone,
tablet, notebook, computer, etc.) before enjoying the music wirelessly with the
earphone.
Enter in pairing mode
Be sure that the earphone is in power off status first, press and hold the MFB for 3-5
seconds, until red and blue led blink alternately. Then release the MFB button, the
unit is now in paring mode. The earphones emit the tone voice“di”it means in
pairing mode.
Pairing the earphones with Bluetooth®devices Make the earphones enter into
pairing mode (please refer to above section)
Place the Bluetooth® Earphone and Bluetooth® device (phone, tablet, music device)
at 1 meter from each other.
Activate the Bluetooth® function on your Bluetooth® device. Please refer to the
manufacturer’s manual for instructions on enabling Bluetooth® on your device.
After searched, select ”CK-BT19” in the device list on the Bluetooth® device.
If a password is asked, enter the “0000” and press ”connect” (only some Bluetooth®
devices will ask for a password)
When the connection is successful, the voice message "connected" is heard from
earphones and BLUE LED will quickly flash a few times when pairing is successful.
Please note pairing mode on the headphone will last for around 3 minutes. If no
devices are paired within around 3 minutes the headphone will automatically return
to standby mode.
If pairing is unsuccessful, turn off the headphone first and then re-pair again
following the above steps.
Re-connecting to Bluetooth®devices

Every time the headphone is switched on, it will connect to the nearest and the last
connected device automatically .
When the headphone is in standby mode and doesn’t connect to any device, short
press the MFB button and it will connect to last connected device automatically.
LISTEN TO MUSIC
LISTEN TO MUSIC
When the headphone is correctly paired with your Bluetooth® device, simply start to
play music on your device and you can enjoy the sound wirelessly in your headphone.
Volume up in music mode: Short press on volume ”+” key. You will hear a beep
tone when the maximum volume level is reached.
Volume down in music mode: Short press on volume ”-” key. You will hear a
beep tone when the minimum volume level is reached.
Go to next song of your playlist: Long press on the Next « + » key.
Go to previous song of your playlist: Long press on the Prev « + » key.
Play/Pause music: Short press on the MFB to pause the music. Short press again
to play again.
HANDS-FREE FUNCTION
You can answer calls from your mobile phone when the headphone is paired with
your mobile phone. If you receive a call when listening to music, your music will
pause automatically and you will hear your telephone ring tone in the headphone.
Answer a call: Short press the multifunction button.
Reject a call : Press and hold the MFB button for 1 seconds until an indication tone
is heard.
End a call: Short press the multifunction button.
Volume up in conversation mode: short press on volume ”+” key. when the
volume has reached the maximum level, you will hear an indication tone.
Volume down in conversation mode: short press on volume ”-” key, when the
volume has reached the minimum level, you will hear an indication tone.
MOBILE DEVICES SUPPORTED
In theory, it can support all equipments with Bluetooth®-enabled phone or music
device that supports Advanced Audio Distribution Profile (A2DP) and Audio Video

Remote Control Profile (AVRCP). In order for Bluetooth® devices to communicate
with one another properly, they must utilize the same Bluetooth® profile. To
determine the profiles supported by your device, please refer to the device's user
guide. Certain Bluetooth features including those listed may not be supported by all
compatible Bluetooth®-enabled devices, and/or the functionality of such features may
be limited in certain devices.
TROUBLESHOOTING
Bluetooth®pair and connection fail
Other cell phone or equipment has been connected before connection, and has not
left yet and Bluetooth®cannot be switched off. When connection feature is employed
again, the Bluetooth®unit will automatically search for this Bluetooth®equipment for
connection. First turn off the Bluetooth®feature of Bluetooth®equipment and the
next Bluetooth equipment can search, pair and connect normally.
The indicator lamp does not turn on and the Bluetooth®unit is not
available
Bluetooth®unit has not operated for a long time, and may come into dormant state,
then press the MFB on the unit for a longer time to re-use it.
Short Bluetooth®connection distance
There is a barrier between the cell phone and Bluetooth®headphone, please clear it
away.
Bluetooth®may be normally connected and played, but sometimes, there
is interrupted
1. There is a barrier between device phone and Bluetooth®headphone, please clear
it away.
2. The distance between the Bluetooth® unit and connected device is too far away,
out of normal connection range. Please put them nearer.
3. The battery of earphones is discharged, please recharge it.
TECHNICAL SPECIFICATIONS
Bluetooth®specifications: v4.2
Working distance: up to 10 meters in open space
Built-in microphone for answering calls from mobile
Built-in rechargeable 90mAh lithium battery - Charging time1 to 2 hours*
Up to 3to4 hours play time and 150 hours standby time
* Battery life & charging time may vary, based on usage & types of devices used
Charging method: Micro USB cable 5V
Box content : Bluetooth®Earphone – Micro USB cable – User manual

RESPECT THE ENVIRONMENT
This product or its battery can not be disposed of with household waste, it
must be returned to a collection point to be recycled. Please check with your
local authorities for details.
ABOUT THIS USER'S MANUAL
We strive to ensure that the information contained in this manual are as accurate as
possible. Changes may be made to the manual or the product without prior
notification. All brands and trademarks mentioned in this manual are the property of
their respective owners.
Warnings