Ledah 11222 User manual
Operating Instructions
Electric Pencil Sharpener
Model: 11222
Before operating this unit, please thoroughly read these instructions
Thankyou for purchasing the 11222
Electric Pencil Sharpener
Specifications
Power source: 220-240V, 50HZ
Current: 1.8A
Thermal switch: 90°C
Dimensions: (H110xW160xL104mm)
Weight: 2.6lbs. (1.2kg)
Parts Identification
How to Use
1. Insert the AC plug into any standard 220-240V AC outlet.
2. Simply insert pencil into the pencil opening and the 11222 will start
sharpening immediately.
Keep the pencil inserted straight to avoid uneven sharpening.
3. At the end of the sharpening cycle, the “AUTO STOP” feature will operate
by automatically stopping the cutter blades away from the pencil.
Note: Some pencils with un-centred lead (pencil defect) will not sharpen
evenly.
4. Pull out the pencil when you feel the end of the sharpening cycle.
5. For smooth trouble-free operation, empty shavings tray frequently.
NOTE: When the shavings tray is removed, the pencil sharpener will not operate.
Please insert the shavings tray prior to use.
Caution
1. To prevent motor damage, remove the pencil from the pencil opening
when point is sharpened.
2. DO NOT insert hard materials such as pens, chalk, crayons or soft
colouring pencils which will damage or clog the cutter blades.
3. If the motor should overheat, a safety device (thermal switch) will
operate to protect the motor from damage. If this should occur, unplug
the power cord and let the unit cool down for approximately 40 minutes.
During this time the thermal switch will cool and reset automatically.
4. The cabinet can be cleaned with a cloth, dampened with a mild soap and
water solution only. Ensure the sharpener is completely dry before
operation.
Distributed in Australia by:
Bantex Pty Ltd
17 Interchange Drive
Eastern Creek NSW 2766
Telephone: 1300 655 667
Email: [email protected]
www.bantex.com.au
Table of contents
