LEDLITE LTSL5R User manual
User Instructions
Please read these instructions and retain them for future reference.
Important information
3h/5h/8h Timer Function
3H
5H
8H
Capacity: 4.0Ah
CCT Changeable
WW / CW / DL
Body Colour: Black
Lampshade: Frosted
Battery Voltage: 4.2V Aluminium + PC
IP Rating: IP65 Direct Sunlight
6 Hours Charging
0 0
-20 C ~ +45 C Lasts 3-5 Rainy Days
Ternary Lithium Battery Power: 5W
Specifications:
Installation Accessories Available:
● LTSLSPK - Spike for LTSL5 Solar Lights
● LTSLPT - Post Top Base Plate for LTSL5 Solar Lights
● LTSLWB - Wall Bracket for LTSL5 Solar Lights
● LTSLEXT - Extension Pole for LTSL5 Solar Lights
LTSL5R
5W LED Outdoor Round Solar Lights
Remote control functions:
1. Open the package, inspect the product and install it carefully.
If any damage is found, please keep the package and return the damaged product.
2. Please read the specifications and parameters in the instructions before installation.
3. Please tighten the solar light and accessories before use.
4. Important: Turn the switch on before use (Fig. 1)
Fig. 1
Working Principle
Fig. 2
● The solar panel charges the battery on sunny days.
● The charging and discharging process is controlled intelligently
without manual operation.
On time can be modified using the remote control (3H/5H/8H)●
● The CCT can be change by pressing the button on the solar lights
or by remote control. See Fig.2 for modes.
● Automatic lighting control (when no timer is set):
▪ 100% brightness from 1H to 4H
▪ 50% brightness from 5H to 8H
▪ 30% brightness from 9H to 12H
Change CCT
Turn ON Button
Turn OFF Button
Night Time Light 3 hours
Night Time Light 5 hours
Night Time Light 8 hours
Dimensions: 65mm
245mm
65mm
70mm
108mm
230mm
150mm
100mm
65mm
245mm
205mm
106mm
LTSL5R LTSLSPK LTSLPT LTSLWB LTSLEXT
PLEASE NOTE: THE PERFORMANCE OF THE LIGHTS MAY BE
AFFECTED BY POOR WEATHER CONDITIONS.
DURING WINTER MONTHS LIGHT DURATION WILL BE REDUCED.
Daylight
Warm white
Cool white
Off
Installation Methods
1. Using LTSLSPK Spike and
LTSLEXT Extension Pole
3. Using LTSLPT Post Top Base
2. Using LTSLWB Wall Bracket
4. Using LTSLPT Post Top Base
Plate and LTSLEXT Extension
Poles
Screw the spike & extension
pole together
Add more extension poles if
necessary
Press Button to adjust CCT
and assemble the solar light. Push the spike in to the ground
1 2
3 4
Mark the position and drill the
fixing holes
Use screws to fix the solar
light tight onto the wall
Press the button and adjust the
colour temperature
Assemble the solar light on
the wall bracket
1 2
3 4
Rotate the small pillar and
assemble the base
Fix the post top base
tightly onto a flat surface
Press the button and adjust the
colour temperature
Assemble the solar light on
the post top base
1 2
3 4
Rotate the small pillar and
assemble the base
Fix the base tightly onto
a flat surface
1 2
Press the button and adjust the
colour temperature
Screw the extension poles
and solar light onto the base
3 4
