Ledluks ALVA LED User manual

ALVA LED
Mounting instructions

2
www.ledluks.com
1. Only competent persons are allowed to perform mounting and maintenance. 2. Before installation make sure that there is no
voltage in the network. 3. Use only original parts for repairs or maintenance. 4. Use only fixtures with proper IP protection in wet
rooms. 5. Before servicing, it is obligatory to disconnect the fixture from the network voltage. 6. Manufacturer does not guarantee
for damage caused by incorrect installation and/or use. 7. Any operation performed on the fixture that is not in accordance with
instructions will void manufacturer’s warranty.
Safety notes
Inside the box
Electrical connection
Attention!
ALVA LED
MOUNTING INSTRUCTIONS
MIN 50 mm
MIN 50 mm
DALI
2 DA
3 DA

54
32
1
ALVA LED
MOUNTING INSTRUCTIONS
3
www.ledluks.com
Mounting
Electrical Connection
EM EB and DALI

8
8
4
www.ledluks.com
76
7
7
Sensor
Safety tab
ALVA LED
MOUNTING INSTRUCTIONS
CLICK
Safety tab

5
www.ledluks.com
9
7
Mounting
ALVA LED
MOUNTING INSTRUCTIONS

6
www.ledluks.com
ALVA LED
MOUNTING INSTRUCTIONS

7
www.ledluks.com
ALVA LED
MOUNTING INSTRUCTIONS

8
Ledluks d.o.o.
Mednarodni Prehod 6, Vrtojba
SI-5290 Šempeter pri Gorici
Slovenia, EUROPE
Tel.: [phone]
[email protected]
www.ledluks.com
ALVA LED
MOUNTING INSTRUCTIONS