LEGO 10001/4558 Metroliner User manual

10001/4558 Metroliner
Power Function® or Powered Up®
Upgrade Instruction Manual
Model by The LEGO® Group Instructions by
Instructions distributed by

1
Brick Train Depot is a fan site about LEGO® brand building bricks. This is not a LEGO product. LEGO, and
the LEGO logo are trademarks of The LEGO Group. Brick Train Depot is not afliated with or endorsed
by The LEGO Group. The LEGO Group and Brick Train Depot are not responsible for any loss, injury, or
damage from use or misuse of this product.
By purchasing these instructions, you agree not to sell, reproduce, or distribute these instructions. You also
agree not to sell or distribute the model made from these instructions.
Choking Hazard!
Set will contain small parts. Not intended for children under the age of 3.
These instructions assume you have an existing 10001 or 4558 Metroliner set that you are wanting to
upgrade to either the LEGO® Power Functions® or Powered Up® system. All parts are Old Gray to match
the era of this set.

2

3

4

5
There is a 9V train motor shown here. Please re-
place with the Power Functions® or Powered Up®
motor you intend to use. Run the cable from the
motor through the chassis in this step

6

7

8
Skip this step for Powered Up® installations.

9

10

11
Replace the 2x2 corners with a 4x4
plate for Powered Up® installations.

10001/4558 Metroliner
Power Function® or Powered Up®
Upgrade Instruction Manual
Instructions Produced by
By downloading these instructions, you agree to use them only for personal use. They are not to be reproduced, distributed, or sold to any
third parties. The model made from these instructions is not to be sold.
The instructions are ©2019 Cam’s Brick. The model is ©2002 The LEGO® Group. LEGO® is a trademark of the LEGO Group of companies
which does not sponsor, authorize or endorse this instruction book. The LEGO Group and Brick Train Depot is not responsible for any loss,
injury, or damage from the use or misuse of this product.