Leica Geosystems CM1950 Owner's manual
CM1950
Cryostat
Supplemental Sheet to the Instructions for Use CM1950 1v8 Rev. I
English
Revision C
Always keep this document with the instrument.
Read carefully before working with the instrument.
Version 1.1, Revision C - 07.2018
3
CM1950
Supplemental sheet to Instructions for Use CM1950 1v8 Rev. I
1
1. Supplemental sheet to Instructions for Use CM1950 1v8 Rev. I
Additional description to Chapter 12.3 Replacing the UVC lamp
Note
For the CM1950, two different variants of the connection piece inside the instrument and the UVC-
Lamp are available. The user needs to check which variant is built-in in the instrument prior to the
exchange of the UVC-Lamp with a new one.
The procedure to exchange the UVC-Lamp is similar with both variants.
Identifying the built-in variant and matching UVC lamp
LVariant 1: Connection piece with 2-pin inlet (→Fig. 1-1), UVC lamp 2-pin (→Fig. 1-2)
1
2
Fig. 1
LVariant 2: Connection piece with 4-pin inlet (→Fig. 2-1), UVC lamp 4-pin (→Fig. 2-2)
1
2
Fig. 2
4Version 1.1, Revision C
Supplemental sheet to Instructions for Use CM1950 1v8 Rev. I
1
Additional information to Chapter 12.3 Replacing the UVC lamp
New Fig. 95
Fig. 3
UV fluorescent tube - 2-pin
Order No. 14 0477 43192
New Fig. 96
Fig. 4
UV fluorescent tube - 4-pin
Order No. 14 0471 57385
www.LeicaBiosystems.com
Version 1.1, Revision C - 07.2018
Leica Biosystems Nussloch GmbH
Heidelberger Str. 17 - 19
D-69226 Nussloch
Germany
Tel.: +49 - (0) 6224 - 143 0
Fax: +49 - (0) 6224 - 143 268
Web: www.LeicaBiosystems.com
