LEISUREWIZE Rock Steady User manual

Read and understand these instructions before fitting these mirrors and
retain for future reference!
Pair of Rock Steady
Towing Mirrors
LWACC34 Manual AW.qxp_Layout 1 16/04/2019 14:00 Page 2

Fitting Instructions.
Please check there are
2 Rock Steady Mirrors (1x
Flat & 1x Convex) in handy
storage bags with all straps,
fittings and lanyards
(attached to the mirrors
arm) are included
for each mirror.
To keep the mirror from
being lost when in use, a
handy lanyard has been
included on the mirror arm.
Place the lanyard over the
mirror and pull to secure.
1
Ensure the securing straps
are threaded correctly as
shown opposite. If required
additional protection pads
are included for securing
the mirror.
2
LWACC34 Manual AW.qxp_Layout 1 16/04/2019 14:00 Page 3

Place the clips on the mirror
arms over the back of the
mirror securing the clips
under the top rim of the
vehicle mirror and secure in
place with the pinch screws.
3
The mirror arm can then be
adjusted along its length,
when the arm is in the
desired position, secure in
place with the pinch screws
as shown opposite.
4
Pass the rubber securing
straps around the back of
the mirror and secure the
clip on the bottom rim of
the mirror, use the stretch
of the rubber strap to get
tight fit to keep the
mirrors secure.
5
LWACC34 Manual AW.qxp_Layout 1 16/04/2019 14:00 Page 4

Streetwize Accessories:
Unit 1, Royce Trading Estate, Ashburton Road West,
Trafford Park, Manchester M17 1RY
Sales enquiries: [email protected]
Technical enquiries: [email protected]
www.streetwizeaccessories.com
It is recommended that the
convex mirror (magnified) is
placed on the passenger side
and the flat mirror on the
drivers side. If necessary the
mirrors can be swapped for left
hand drive cars, by removing
the screw on the arm near the
ball joint and swapping the
mirrors around. The ball joint
on the rear of the mirror allows
you to easily position the
mirror at any angle.
6Mirror can
rotate 360°
LWACC34 Manual AW.qxp_Layout 1 16/04/2019 14:01 Page 1