Lematec AS118-2 User manual

AS118-2 SANDBLASTING GUN
USER MANUAL
Body: Plastic ABS
Air Inlet: 1/4” Female
Operating Pressure: 90 PSI. Max to 150 PSI
Air Flow 11 CFM at 100 PSI.
With Gravity and Siphon Feed function
With 10 ft hose
FEATUREFUNCTION
APPLICATION
Air consumption: 7 scfm
Recommended hose size: 3/8"
Air inlet screen: 20 mesh filter
Storage case 600cc (18 Oz) Pe.
Nozzle 5.0m/m steel
Remove Paint / Remove Rust / Remove Tough Stains
Remove Grime /Auto Care / Home Improvement Tool
DIY Projects
WHAT’S INCLUDED
1* Siphon-Feed Sandblaster Combo Handheld Sandblaster
1* 10-ft Hose
INSTRUCTIONS
A
B
C
D
E
F
G
H
1. Air Supply Setup attachment:

CAUTION
1. Do not open the storage cap while blasting. The sandblaster operates in high
pressure and can harm the operator when opened while in operation.
2. Wear protective goggles, gloves, headset and mask before
performing this operation
3. Ensure the air compressor is turned off and all connections are secured
while setting up the sandblaster.
3. Follow the operating instructions
below for proper usage of the
sandblaster.
IMPORTANT
Do not let the siphon hose and tube gap be covered by media in the sand tank.
Otherwise, the suction power will be reduced.
2. Load your preferred abrasive or
sandblasting media.
The type of abrasive to use will depend
on the kind of work and result you want
to achieve.
The AS118-2 Features 2 Operating functions: Gravity-Feed and Siphon-Feed