LENCO DF-711B User manual

ENGLISH
Digital Photo FrameDigital Photo Frame
Digital Photo FrameDigital Photo Frame
Please read thismanual before operating
User's Manual
DF-711

1
Important Safety Instructions
WARNING:
Do not expose this deviceto water or moisture.
The device should be situatedaway from sources of highheat such
as radiators or stoves.
The device should be connectedto a power supply onlyof the type
described in the operating instructionsor as marked on theunit.
Care should be taken so that objects are not placed on, nor liquids
spilled on or inside the device.
The user should not attempt to service the device beyond those means
described in these operating instructions. All other servicing should be
referred to qualified service personnel.

1. LCD
2. SD/MMC/MS/XD Slot
3. Power DCIN Jack
4. SKIP-BACKWARD( )
5. SKIP-FORWARD( )
6. ROTATE: Use to rotatethe photo .
7. 16:9/4:3: Use to switchamong Wide Screen16:9, AutoZoom
Regular Screen 4:3.
8. SILDE SHOWON/OFF
9. Stand
2
Getting Started
Locating Controls andConnections
9
23
1
45
768

1. Retractable keypad
2. Key holesfor wall mount.
3. Stand screwhole
4. LOCK SLOT: for connection oflockable chain lock.
5. Power on/offindicating LED
6. Screen brightnessadjustment knob
7. POWER ON/OFF
8. USB Slot
9. DC powerinput
3
Getting Started
1223
4
867
59

4
Getting Started
Hang on thewall
1. Insert ascrew into yourdesired spot onthe wall.
2. Place oneof the KEYHOLES ,depending on your desired Frame
orientation, over thescrew and hangthe Frame.
Placing the PhotoFrame
You can place thisPhotoframe on aflat surface or hang it onthe wall.
Place on aflat surface
1. Screw inthe stand tothe stand screwhole on theback of the
Photoframe.
2. Adjustthe stand positionfor vertical orhorizontal placement, tighten
the screw.
Horizontal Vertical
(The photo automaticallyturns 90 degreeas the Photoframeturns 90
degree)

5
Getting Started
Using the Key Pad
Tohide the keypad, simply
push it back.
Touse the keypad, just pull it
out all theway.

6
Getting Started
Memory Cards
1. Insert the memory card into the slot of the Photoframe, making sure that
the metal contacts of the memory card is facing the front of the Frame.
2. To remove, simply pull out the card.
SD/MS/MMC/XD
Metal contacts on
the memory card
Insert the USB into the USBslot on thePhotoframe.
Using Card Reader and USB
USB
Note:
1. If youuse Memory StickPro, a MemoryStick Pro-to- MemoryStick
adaptor must beused otherwise thecard can bestuck in theslot.
2. If yourmemory card isnot listed onthe above, youcan use a
USB - CARDREADER to connectto the Frame.

7
Getting Started
This Photoframe canbe powered byAC throughthe supplied switching
power AC adaptor.
Connect theAC adaptor toyour Photoframe asillustrated below,There
are two inputsockets (DC 12VIN) for acceptingthe plug fromAC adaptor.
Note
Always turn offthe Photoframe beforeconnecting or disconnectingthe
AC cord.
Only use theAC adaptorsupplied with thisplayer. Usinga different type
of adaptor maycause malfunction ordamage to theproduct.
When theAC adaptor isused for prolongedperiod of time,the adaptor
may heat up,this is normaland is nota cause forconcern.
When not usingthe adaptor,unplug it fromthe outlet.
Using the ACAdaptor
To home power outlet
DC IN 12V
Use this DCIN when the
frame is wall-mounted
DC IN 12V

8
Viewing Photos
1. Insert oneend of theACADAPTER into DCIN, and theother end into
an electrical outlet.
2. Slide ON/OFF to the"ON" position. ThePOWER INDICATOR
illuminates.
3. Adjustthe screen brightnessusing the Brightness Adjustment Knob
on the backof the frame.
Note: if thebrightness setting isat the minimum,the screen isdark.
4. Insert yourmemory card intoSD/MMC/MS/xD. Or,insert your USB
stick into USBHOST.Yourphotos appear onthe display with
slideshow.
Note:
If both memorycard and USBare inserted, theFrame plays memorycard.
Compatible image format:JPEG
Viewing Photos

Viewing Photos
9
Youcan view thephoto in threemodes in sequence: 4:3, automaticzoom
and 16:9 (widescreen)modes by repeatedlypressing .
4:3 mode: thephoto is displayedin original size.
Automatic Zoom:the photo iszoomed to fillthe whole screen.Portion
(top and bottom)of the originalphoto will becut off fromthe screen. If
the original photois too small,the automatic zoomwill have noor little
effect.
16:9 mode: thephoto is stretchedto fill 16:9widescreen, this resultsin
image distortion. Somenewer digital cameracan shoot 16:9format,
viewing in 16:9mode will appearnormal.
Youcan rotate yourphotos to viewthem at differentangles.
1. Select yourdesired photo.
2. Repeatedly press to rotate thephoto to yourdesired angle.
Rotating Your Photos
Turning Off/On Slideshow
Viewing in 4:3 ,Automatic Zoomand 16:9 Mode
Press , toturn off andturn on slideshow. Withthe Slideshow turned
off, you canbrowse the photomanually by pressing to view thenext
photo and toview the previousphoto . Withthe Slideshow turnedon,
the photos displayautomatically.

10
Removing and Installing Decorative Frame
Installing Decorative Frame
Removing Decorative Frame
1. Insert thetwo anchor tabson the topof main unitinto the twomatching
holding slots ofthe decorative frame,make sure tabsare fully
inserted.
2. Bring themain unit andthe decorative frametogether, andpress down
the main unituntil the twolock tabs clickedinto place.
1. Simultaneously pressdown the twolock tabs meanwhilepush away the
decorative frame fromthe unit.
2. Separate thedecorative frame fromthe main unit.
Anchor tab
Anchor tab
lock tab
Press
down
Press
down
lock tab

11
Connecting Locks
The Photoframe has areceptacle (slot) to accepta locking cable tokeep
it secure in high-traffic areas, such asin-store product demonstration.

12
Symptom Check
No display
No photos displayedwhile
Memory Card orUSB stick
has been inserted.
1. Make surethe ACPower cord is securely
plugged into anactive ACoutlet.
2. Check Powerswitch is atON position.
3. Check theBrightness Adjustmentknob is
not set atthe minimum.
1. Remove andinsert Memory Cardor USB
and make surethey are properlyinserted
in place.
2. Make surethe image filesare in correct
format (JPEG).
Troubleshooting

13
Specifications
Power Requirements
Power Consumption
Operating TemperatureRange
Input:100~240V AC
Max 8W
+10 C~ +40 C
oo
Operating Voltage
JPEG
IN: 100~240VAC OUT: 12V/1.25A
TFT-LCD Size
Weight Dimensions
Weight and Dimensions
7”TFT-LCD
TFT-LCD
Size
7”
12V DC
SD/MMC/MS/XD card
Resolution
480*3(RGB)*/234
7”
General
Photo Formats
Supported
Compatible
Memory Cards
A.C Adaptor
Display
432g 210(W)x143(D)x40(H)mm
Specifications are subjectto change withoutnotice. While effortshave
been made toensure accuracy,the manufacturer willnot be heldliable
for any inaccuraciesor errors inthe information containedwithin.

If at anytime in thefuture you shouldneed to disposeof
this product pleasenote that: Waste electrical products
should not bedisposed of withhousehold waste.
Please recycle wherefacilities exist. Checkwith your
Local Authorityor retailer forrecycling advice. (Waste
Electrical and ElectronicEquipment Directive)