LENCO SCD-39 USB User manual

CD/MP3 PLAYER WITH PLL FM RADIO
AND USB READER
SCD-39 USB


Users guide



Please read and follow these instructions before using your unit.
For information and support, www.lenco.com

1
Dear customer,
Thank you for buying this Lenco product. Quality and usability is our
top priority. In order to let you fully enjoy this product, we have
manufactured this product using high quality standards, materials,
components and care.
SAFETY INSTRUCTIONS
Read carefully before use
CAUTION - RISK OF ELECTRICAL SHOCK - DO NOT
OPEN
CAUTION: TO PREVENTAN ELECTRICAL SHOCK, DO
NOT REMOVE ANY COVER SCREWS. THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REQUESTAQUALIFIED
SERVICE PERSON TO PERFORM SERVICING.
Keep these instructions in mind:
Although this device is manufactured with the utmost care and
checked several times before leaving the factory, it is still
possible that problems may occur, as with all electrical
appliances. If you notice smoke, an excessive build-up of heat or
any other unexpected phenomena, you should disconnect the
plug from the main power socket immediately.
Do not use this device near water.
Clean only with a slightly damp cloth.

2
Do not cover or block any ventilation opening. When placing the
device on a shelf, leave 5 cm (2”) free space around the whole
device.
Install in accordance with the supplied user manual.
Don’t step on or pinch the power cord. Be very careful,
particularly near the plugs and the cable’s exit point. Do not place
heavy items on the power cord, which may damage it. Keep the
entire device out of children’s reach! When playing with the
power cable, they can seriously injure themselves.
Unplug this device during lightning storms or when unused for a
long period.
Keep the device away from heat sources such as radiators,
heaters, stoves, candles and other heat-generating products.
Avoid using the device near strong magnetic fields.
ESD can disturb normal usage of this device. If so, simply reset
and restart the device following the instruction manual. During file
transmission, please handle with care and operate in a static-free
environment.
Never insert an object into the product through the vents or
openings. High voltage flows thru the product and inserting an
object can cause electric shock and/or short circuit internal parts.
For the same reason, do not spill water or liquid on the product.
Do NOT use in wet or moist areas such as bathrooms, steamy
kitchens or near swimming pools.
Do not use this device when condensation may occur.
This device must operate on a power source as specified on the
specification label. If you are not sure of the type of power supply
used in your home, consult your dealer or local power company.

3
The socket outlet must be installed near the equipment and must
be easily accessible.
Do not overload AC outlets or extension cords. Overloading can
cause fire or electric shock.
Devices with Class 1 construction should be connected to a main
socket outlet with a protective earthed connection.
Devices with Class 2 construction do not require a earthed
connection.
Keep away from rodents. Rodents enjoy biting on power cords.
Always hold the plug when pulling it out of the main supply socket.
Do not pull the power cord. This can cause a short circuit.
Avoid placing the device on any surfaces that may be subject to
vibrations or shocks.
When the device is not in use for long periods, unplug the AC
power cable for safety reasons.
To clean the device, use a soft dry cloth. Do NOT use solvents or
petrol based fluids. To remove severe stains, you may use a
damp cloth with dilute detergent.
The supplier is not responsible for damage or lost data caused by
malfunction, misuse, modification of the device or battery
replacement.
WARNING: Prolonged exposure to loud sounds from
personal music players may lead to temporary or permanent
hearing loss.
The USB memory stick should be plugged into the unit
directly. Don’t use an USB extension cable because it can
cause interference resulting in failing of data.

4
OVERVIEW OF THE PLAYER
1. FOLDING HANDLE
2. FM TELESCOPIC
ANTENNA
3. CD DOOR
4. CD DOOR OPEN AREA
5. SKIP/SEARCH DOWN
BUTTON
6. SOURCE BUTTON
7. STANDBY INDICATOR
8. STOP/CH- BUTTON
9. PLAY/PAUSE/CH+
BUTTON
10. LCD DISPLAY
11. ON/STANDBY BUTTON
12. SKIP/SEARCH UP
BUTTON
13. SPEAKERS
14. MEM/MODE/PROG
BUTTON
15. VOLUME - BUTTON
16. USB PORT
17. VOLUME + BUTTON
18. FOLDER/10+ BUTTON
19. BATTERY
COMPARTMENT
20. DC IN JACK
21. PHONE JACK
22. AUX IN JACK
1234
5678 9101112
13 14 15 16 17 18 13
19 20 21 22

5
POWER SUPPLY
BATTERY OPERATION
1. Remove the battery compartment cover gently.
2. Install 6 x 'C' size batteries (UM-2 or equivalent) while observing
the correct polarities.
3. Replace the battery compartment cover.
NOTE:
The AC/DC adapter must be detached from the DC IN jack of the
player for battery operation.
Leaking batteries may damage the battery cabinet and the player
as a whole, so they should be removed from the cabinet when
becoming flat or when the player is not to be played on batteries
for some time.
DC INPUT OPERATION
Plug the supplied adapter to the DC IN jack on the unit and the main
power.
NOTE:
If not any audio signal inputs to the unit in about one hour, the unit
will enter to standby mode automatically (except at FM radio mode).
FM RADIO
TUNING THE FM RADIO
1. The standby indicator will light once connect the main unit to the
main power. Press the ON/STANDBY button to turn the unit on
(the standby indicator will be off).
2. Press the SOURCE button repeatedly to switch the unit to radio
mode if necessary.
3. To launch the auto-searching, press and hold the SKIP/SEARCH

6
DOWN button or SKIP/SEARCH UP button several seconds and
then release it.
4. Press the SKIP/SEARCH DOWN button or SKIP/SEARCH UP
button to tune the radio stations manually.
5. Adjust the volume level to a comfortable listening level via
pressing the VOLUME +/- buttons.
6. Press the ON/STANDBY button to turn off the unit.
NOTE:
The FM telescopic antenna is directional. When you are receiving
an FM broadcast, fully extend the telescopic antenna and rotate it
for the best reception.
STORING YOUR FAVORITE RADIO STATION
1. Tune to your favorite station first; press the MEM/MODE/PROG
button for storing the current station until memory cell number
flashes on the screen.
2. Use the STOP/CH- button or the PLAY/PAUSE/CH+ button to
select the corresponding memory cell among P01-P20.
3. Confirm your selection by pressing the MEM/MODE/PROG
button.
4. During radio playback, press the STOP/CH- button or the
PLAY/PAUSE/CH+ button repeatedly to recall the preset stations.
HANDLING AND MAINTENANCE OF A DISC
Follow the instructions below to handle and
maintain your disc in order that long time and
trouble free performance can possibly be
obtained:
Ensure not to caress the rain bow side of the
HANDLE DISC ONLYAS SHOWN

7
disc; handle the disc by the edge.
Long time exposure to sunshine, high temperatures and humidity
will damage the disc. And keep storage area clean.
Avoid sticking labels on both sides of a disc. Writing with pointed
articles on the disc should be strictly avoided.
Clean the disc wiping the centre and then working out to the edge
with a dry & soft cloth or a disc brush. Avoid any cleansing lotion
or chemical eradicator.
Store them in their cases when they are not to be used.
LOAD A DISC
1. Open the CD door by the Door open area.
2. Load a disc on the disc tray with the label side facing up.
3. Close the CD door.
PLAY A DISC (CD/MP3)
1. Press the ON/STANDBY button to turn the unit on (the standby
indicator will be off).
2. Press the SOURCE button repeatedly to switch to CD mode.
3. Follow the steps above to load a disc.
4. The player begins reading disc immediately.
5. When the disc is successfully read, the playback will start from the
first track automatically.
6. Press the PLAY/PAUSE/CH+ button once to halt music playback,
press the button again to resume the normal playback; press the
STOP/CH- button to cease music playback.
EXTERNAL MEMORY MEDIA OPERATION (USB)
1. Press the ON/STANDBY button to turn the unit on (the standby

8
indicator will be off).
2. Insert an USB to the USB port.
3. Press the SOURCE button repeatedly to switch to USB mode.
4. When the inserted USB is detected and read, the first track will be
played automatically.
5. Press the PLAY/PAUSE/CH+ button to pause or resume the
playback.
6. Press the STOP/CH- button to cease the playback.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY
(CD/MP3/USB)
1. Press once the SKIP/SEARCH UP button in music play to skip to
the next track; press once the SKIP/SEARCH DOWN button in
music play to go back to beginning of the current track, press the
button twice continuously to skip to the previous track.
2. Press and hold the SKIP/SEARCH UP button or the
SKIP/SEARCH DOWN button in music play to search at quick
rate for a specific point to play.
3. Press the FOLDER/10+ button once in play to skip to the track 10
tracks ahead, twice to skip to the track 20 tracks ahead. You can
reach the last track of the disc using this button.
SKIP TO THE PREVIOUS/NEXT FOLDER (MP3/USB)
1. During playback, press and hold the FOLDER/10+ button until the
folder number flashes on the screen.
2. Press the SKIP/SEARCH DOWN button or SKIP/SEARCH UP
button to select the folder you want.
3. Wait several seconds or press the FOLDER/10+ button to confirm,
the playback starts from the selected folder.

9
REPEAT PLAYBACK (CD/MP3/USB)
During playback, press the MEM/MODE/PROG button to repeat play
a single track; press the button twice to repeat play all tracks; press
the button three times to enter the introduction play mode; press the
button four times to enter the random play mode; press the button
five times to exit.
PROGRAMMED PLAY (CD/MP3 DISC/USB)
1. In stop mode, press the MEM/MODE/PROG button once, the
program’s icon shows with a program sequence indication "P01"
first, then a track number flickers on the LCD with the program’s
icon.
2. Select the first track to be programmed using the SKIP/SEARCH
UP button or the SKIP/SEARCH DOWN button, and then press
the MEM/MODE/PROG button again to store and advance to the
next programming step (If there are several folders on the MP3
disc or USB, it is necessary to program folders first and then the
tracks. The method of the folders programming is the same as the
tracks programming.).
3. Repeat the above steps to program more tracks. Amaximum of 20
tracks for CD and 99 tracks for MP3 disc/USB can be
programmed in memory in a preferred order. If the memory is full,
the screen will show “FUL” for indicating.
4. Press the PLAY/PAUSE/CH+ button to begin programmed play in
the preferred order after you are done with programming. The
player stops automatically after all programmed tracks are played.
5. You may press the STOP/CH- button to terminate programmed
playback. In program stop mode, press the PLAY/PAUSE/CH+

10
button to begin the programmed playback with the programming
order identical with the previous one done; press the STOP/CH-
button again to clear the programming.
AUX IN
1. Connect the AUX IN jack on the unit to an audio source, for
example, MP3 player with an audio cable.
2. Power on the unit following the corresponding instructions.
3. Press the SOURCE button repeatedly to switch to AUX mode.
4. Use the native controls on the connected audio device to begin
playing music through the connected unit.
STEREO PHONE JACK
A stereo phone jack has been provided on the back side of the
player so that you can listen without disturbing others. To use this
jack, plug in the headphones/earphones (NOT INCLUDED) and
adjust the volume level to a preferred level.
NOTE: When external headphones/earphones are connected, the
speakers will be muted.
CAUTION: Listening at high power for a long moment could damage
users' ears.

11
SPECIFICATION
Power requirement. AC power adaptor:
Input: AC 100-240V, 50/60Hz
Output: DC 9V, 1A
DC 9V UM-2/"C" x 6pcs (batteries) – not
included
Power consumption: 9W
Dimensions Approx. 232(L) X 227(W) X 112.5(H) mm
Operation temperature +5°C ~ + 35°C
Receiving band FM
Tuning range FM 87.5 - 108 MHz
Playback system Compact Disc Digital Audio System
Output power 1.2W x 2 @10% THD
Speaker impedance 8 ohms
USB USB 2.0 version
Specifications are subject to change without notice.
SERVICE AND SUPPORT
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany 0900-1520530 (Local charges)
The Netherlands 0900-23553626 (Local charges + 1ct p/min)
Belgium 02-6200115 (Local charges)
France 03-81484280 (Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6

12
PM.
When contacting Lenco, you will always be asked for the model and
serial number of your product. The serial number can be found on
the back of the device. Please write down the serial number below:
Model: SCD-39 USB
Serial number:_________________________________
Lenco offers service and warranty in accordance to European law,
which means that in case of repairs (both during and after the
warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs
to Lenco directly.
Important note: If this unit is opened or accessed by a non-official
service center in any way, the warranty expires.
This device is not suitable for professional use. In case of
professional use, all warranty obligations of the manufacturer will be
voided.
This symbol indicates that the relevant electrical
product or battery should not be disposed of as
general household waste in Europe. To ensure the
correct waste treatment of the product and battery,
please dispose them in accordance to any
applicable local laws of requirement for disposal of
electrical equipment or batteries. In so doing, you
will help to conserve natural resources and improve standards of

13
environmental protection in treatment and disposal of electrical
waste (Waste Electrical and Electronic Equipment Directive).
Products with the CE marking comply with the EMC
Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of
the European Community.
®All rights reserved