LENCO Xemio-768 User manual

1
Model: Xemio-768 / MP-208
Quick Guide
Korte handleiding
Kurzanleitung
Guide rapide
Guía Rápida
For information and support, www.lenco.com
Zie voor informatie en ondersteuning www.lenco.com
Informationen und Helpdesk:www.lenco.com
Pour des informations et une assistance, visitez : www.lenco.com
Para más información y asistencia: www.lenco.com

2
Index
English................................................................................................... 3
Nederlands ........................................................................................... 8
Deutsch............................................................................................... 14
Français............................................................................................... 20
Español................................................................................................ 26

3
English
Quick Guide
1.Controls and Connections
Item
Description
1
TFT LCD Display
2
Button (ON / OFF, Play / Pause, Select / Enter)
3
Button (Previous / Fast-Rewind, Item up)
4
Button (Next / Fast-Forward, item down)
5
M
Button (Call Menu / Submenu)
6
Button (Exit; Back to Previous Menu / Main Menu)
7
USB Micro Connector (PC Connection / Charge)
8
Microphone Position (inside Micro USB port)
9
Memory Card Slot (for Micro SD Card)
10
Earphone Output Jack (3.5mm Stereo)
11
Button (Volume Down)
12
Button (Volume Up)
2. Insert the included Micro SD Memory card before using the player
•If not already switched off, turn off the player and plug in the Micro SD
memory card into players card slot. Now you can connect the player to
your computer (PC/Mac) to copy your favorite music files to the player.
Note that “Disk error!” will be displayed, if no Micro SD card is inserted

4
into the player and the play function is selected.
3. Charging the battery
•Make sure that your computer is turned on. Connect the player to the
computer by using the included USB cable. The computer will detect
and install the driver automatically. Once the installation is complete,
the player will be displayed as device in “My Computer” or for MAC
users on the desktop.
•When connected to a computer, the player will charge automatically. It
will take 2 ~ 3 hours to fully charge the battery. During charging it’s
possible to up- download files to the inserted Micro SD card.
Warning:
Better use the original USB cable delivered with your MP3 player. This
cable is a data and charging cable. Some other USB cables in the market
are charging only cables. If you use a charging only cable to transfer data
from your computer to your player, it will only show the battery symbol
on the screen and will not be detected by your computer as an external
drive; this means that you cannot transfer any files from your computer
to your MP3 player.
Note :
The player contains a built-in temperature monitor sensor. If it detects
that the battery pack temperature is not within acceptable values, it will
control and stop the charging function. The charging function will
automatically restart when the detected battery pack temperature
returns to delete normal limits.
4. Turn ON / OFF the player and use of Main Menu:
•Press and hold the button for 3 seconds to turn the player “ON”,
You will see one of the following Menu screens “Bluetooth / Music /
Movie / Record / Picture / Setup / eBook”
•Select your desired menu function by using the / , and M
button.
•Press the M button to enter the sub menu of that function.
•To return to the previous screen, press the button.
•Adjust the volume level by pressing the / button.
•To turn OFF the player, press and hold the button for 3 seconds.

5
NOTE about the hearing protection function; a display warning pops -up
on the screen, or a beep warning can be heard from the earphone every
time you increase the volume and reach to the default setting level 12
which may exceed 85dB limit. Press the Mbutton to accept the warning
and continue increasing the volume by pressing +.
Bluetooth Audio Transmission
To Turn On the Bluetooth Function:
•From the main menu, choose the Bluetooth function by using /
and buttons, a Bluetooth sub menu appears.
Search and Pair Bluetooth device.
NOTE: Before pairing, please make sure your Bluetooth Receiver Device
supports the Bluetooth A2DP profile.
•Keep the device within a 1 meter range of your Bluetooth receiver
device. Power it On and set it into searching / pairing mode;
•Turn the BT On in “BT Control”menu.
•Then, in the Bluetooth list menu choose “Search Device”by using the
/ and buttons, the device will start searching for
approximately 10 ~ 20 seconds. Devices found will be listed on the
screen.
•Choose your device from the on screen list and choose “Pair /
connect”by using the / and button. Wait a few seconds,
both devices should be paired and a Bluetooth icon “ “ will show on
the display indicating the Bluetooth connection is ok. If the connection
is lost the color of the Bluetooth symbol will change to grey.
•Choose “Folders & songs” in the Music menu list to directly select your
favorite music.
•“The player will switch to the “Now Playing” screen. You now can
select Previous / Next / Play / Pause and adjust volume by using the
/ ,and / buttons.
•To exit the Bluetooth Transmission function, press the button
until you see the main menu icons. Select the Bluetooth menu. Select
‘BT control’ from the list and select ‘Turn BT off’ .