LENCO XEMIO-106 User manual

Xemio-106/116/126/136
User's Manual
Notice: Thank your for choosing our product! Please read the user's manual
carefully to ensure proper operation.
1

Content
Precautions
System requirement
1. Installation instruction
1.1 Installing the driver
1.2 Installing the battery
2. Connecting/ downloading/ disconnecting
2.1 Connecting a PC
2.2 Downloading MP3 music
2.3 Removing USB device
3. Basic operation
3.1 Buttons and functions
3.2 Power on/off
3.3 Main menu setup
4. MP3 Player Operation
4.1Playing music
4.2 Voice mode
4.2.1 Playing voice
4.2.2 Recording
4.3 Function Setting
4.3.1 Setting EQ mode
4.3.2 Setting play mode
4.3.3 Setting contrast
2

4.3.4 Setting backlight
4. 3.5 Setting power set
4.3.6 Setting recording
4.3.7 Setting language
4.3.8 Exit
4.4 Intro
4.5 About
4.6 Folder function
4.7 Exit
5. A-B loop playing
6. Lock function
Lyric sync
USB mode
FAQ
Technical specifications
3

Precautions
1) Never use the player during driving or operating other vehicles to avoid traffic
accident, which is also restricted by the law in some districts. Even on foot, it is still
dangerous to listen in extremely high volume especially during crossing the street.
Wherever with potential risks, please stop using the player for safety purpose.
2) Please insert the earphone before powering on the player, which can not only
avoid damaging the earphone but keep the player in good condition.
3) Keep the player clean and away from heat source or direct sunlight, dirty, humid or
rainy place.
4) If the surface is dirty, please clean with soft cloth dipped with clean water or soft
abluent. Never clean the case with alcohol or diluents.
5) Never use the player in rather dry environment to avoid static.
6) Never disconnect the player from PC abruptly during downloading, uploading and
formatting to avoid application failure.
7) When the player is used as removable disk, please follow the proper file
download and upload procedures. Our company resumes no responsibility for any
file lost due to improper operation.
4

System requirement
System requirement of MP3 player:
Microsoft Windows 98/2000/Me/XP
Pentium 200MHZ or above.
USB
120MB hard disk space
Mouse installed
CD-ROM drive
5

1. Installation instruction
1.1 Installing driver only for Windows 98 (The driver can be downloaded from our
website: www.lenco-audiovideo.com. This driver is not required for Windows ME
or above)
a. Connect the MP3 Player to the USB port of a PC, "Find new hardware" appears
on the screen, then click "Search latest driver for this device", and then click
"Next".
b. Select "Look in" to select the directory where you unzipped the driver files, and
then click Yes.
c. PC will install the driver for Windows 98 automatically.
1. 2 Installing battery
 Install one #7 1. 5V alkaline battery properly upon indicator on the play.
 Press and hold the  button to power the player on and enter the MP3
standby mode.
2. Connecting and downloading
2.1 Connecting a PC
Before operation, please verify the player is powered off with one end of the USB
cable came with the system inserted into PC and another end into the MP3 player.
2. 2 Downloading MP3 music
 Connect MP3 player to the USB port of a PC
 Download MP3 music to MP3 player.
6

Data transmitting
Notice: If not all the downloaded files can be played, please verify there are not
more than 500 files on the MP3 player. This is the maximum capacity.
2.3 Removing the USB device
 Double click the Safely Remove Hardware icon on the taskbar:
 From the Safely Remove Hardware screen, highlight "USB Mass Storage
Device" item, and then click the "Stop” button. The "Stop Hardware Device" window
appears on the screen as shown in the picture below.
7

 Click “OK”. After the "Safe to Remove Hardware" window appears, the
player can be safely disconnected from the PC.
Notice: Never unplug the USB cable when transmitting data with PC to avoid
damaging the Player. After data transmitting, please do not disconnect the player
from your PC until "Device can now safely be removed" appears. While using USB
function, all other buttons will be nonfunctional.
In case of application lost or I/O error and power on issues caused by improper
operations, please refer to the FAQ.
3. Basic operation
3. 1 Buttons and functions
1) Play/Pause/Stop
2) Menu/Last/Next
3) Hold
4) Earphone
5) (A-B) Repeat/REC
6) Volume+
7) Volume–
8

3.2 Power on/off
From power off mode, press the  button to enter the MP3 standby mode.
Press the button 3 seconds in any mode and the player will save the data and
enter power off mode.
MP3 standby mode
Notice: If the player is powered off while in standby mode or while playing, all the
settings will be lost!
3.3 Main menu setup
 From standby or playing mode, you can press the MENU button to enter the
main menu.
 Push the ׀or ׀button to select: Play music, Voice, Setting, Intro, About,
Folder and Exit; you can press the MENU button to enter the desired submenu.
4. How to use the MP3 player
4.1Playing music
a) From MP3 standby mode, you can press the button to play MP3 music and
press the  button again to pause. To resume playing, please press the
button a third time.
9

Play Pause
b) From play or pause mode, press and hold the button for 2 seconds, the
player will return to the MP3 standby mode, press and hold the button again, it
will repeat step "a)".
c) From MP3 standby or play mode, you can push the ׀or ׀button to select
the previous or next song.
d) From STOP mode, you can push and hold the ׀or׀button to find your
desired music quickly.
e) From PLAY mode, you can press the ׀or׀button to fast backward or
forward in the current song.
f) From PLAY mode, press the V + or V-button to adjust the volume.
g) From MP3 standby, play and pause mode, press and hold the  button for 3
seconds, the player will save the data and enter the power off mode.
4.2. Setting the voice mode
4.2.1 Playing voice
a) From MP3 mode or voice standby mode, you can press the MENU button to enter
the main menu. To enter the playing voice mode, please push the ׀or ׀button to
select Voice and press the  button. You can press the  button to play, and
press this button again to pause. To resume playing, please press this button a third
time.
10