LENCO SCR-97 USB User manual

PORTABLE STEREO FM RADIO WITH
CD/MP3/USB-PLAYER AND CASSETTE
SCR-97 USB
INSTRUCTION MANUAL
For information and support, www.lenco.eu

WARNING
CLASS 1 LASER PRODUCT
This product contains a low power laser device.
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
PRECAUTIONS
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
• Do not use the unit in places which are extremely hot, cold, dusty, or humid.
• Placetheunitonaatandevensurface.
• Donotrestricttheairowoftheunitbyplacingitinaplacewithpoorairow,bycoveringitwithacloth, 
 orbyplacingitonacarpet.
ON SAFETY
• WhenconnectinganddisconnectingtheACcord,griptheplugandnotthecorditself.Pullingthecordmaydamage
it and create hazard.
• Whenyouarenotgoingtousetheunitforalongperiodoftime,disconnecttheACpowercord.
ON AC VOLTAGE
• Beforeuse,checkthattheratedvoltageofyourunitmatchesyourlocalvoltage.
ON CONDENSATION
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the CD player.
• When there is condensation inside the unit, the unit may not function normally.
• Letitstandfor1to2hoursbeforeturningthepoweron,orgraduallyheattheroomupanddrytheunitbeforeuse.
* Ensureaminimumdistanceof5cmaroundtheapparatusforsufcientventilation.
* Ensurethattheventilationisnotimpededbycoveringtheventilationopeningswithitems,suchasnewspapers,
table-cloths, curtains, etc..
* Donotplacenakedamesources,suchaslightedcandlesontheapparatus.
* Take attention to the environmental aspects of battery disposal.
* Use the apparatus only in moderate climates.
* Donotexposetheapparatustodrippingorsplashing.
* Donotplaceobjectslledwithliquids,suchasvases,ontheapparatus.
• Mainsplugisusedasthedisconnectdevice.Itshallremainreadilyoperableandshouldnotbeobstructedduring
 intendeduse.Tobecompletelydisconnectedtheapparatusfromsupplymains,themainsplugoftheapparatusshall
be disconnected from the mains socket outlet completely.
Should any trouble occur, disconnect the AC power cord and refer servicing to qualied personnel.
Warning: Do not touch the lens.
DO NOT THROW BATTERIES IN FIRE !
ATTENTION : To reduce the risk
of electric shock, do not remove the
cover. There are no user serviceable
partsinsidetheunit.Referallservicing
toqualiedpersonnel.
The exclamation point within
thetriangleisawarningsign
alertingtheuserofimportant
instructions accompanying
the product.
The lightening flash
with arrowhead symbol
within the triangle is a
warning sign alerting
the user of "dangerous
voltage" inside the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Incaseofmalfunctionduetoelectrostaticdischarge,theapparatushastoberesetbydisconnectingitfrommainssupply.
THE MARKING PLATE IS LOCATED AT THE BACK OF ENCLOSURE OF THE APPARATUS.

1. VOLUME CONTROL
2. FUNCTION SWITCH
3. CARRYING HANDLE
4. CASSETTE PAUSE
5. CASSETTE STOP/EJECT
6. CASSETTE F.FWD
7. CD OPEN BUTTON
8. CD DOOR
9. CASSETTE REWIND
10. CASSETTE PLAY
11. CASSETTE RECORD
12. FM STEREO
13. DIAL SCALE
14. MODE SWITCH
15. CD DISPLAY
16. TUNING CONTROL
17. SPEAKER
18. CD NEXT BUTTON
19. PLAY/PAUSE BUTTON
20. CD BACK BUTTON
21. CASSETTE DOOR
22. CD PROG/CLK-ADJ./
PLAY MODE BUTTON
23. CD STOP /CD/
USB BUTTON
24. POWER BUTTON
25. PHONES JACK
26. TELESCOPIC ANTENNA
27. BATTERY COMPARTMENT
28. AC SOCKET
29. USB PORT
GB 1
LOCATION OF CONTROLS
USING HOUSE CURRENT
Beforeuse,checkthattheratedvoltage
ofyourunitmatchesyourlocalvoltage.
Note:Plugisusedasthedisconnectdevice.
The disconnect device shall remain readily
operable.
USING BATTERIES
Disconnect the AC power cord from the AC inlet of the
unit. Battery power is cut automatically by the cord while
it is connected.
InserteightUM-2(sizeC)batteries.
battery door
When the volume decrease, or the sound distorts, replace
all of the batteries with new ones.
To AC socket
To AC outlet
POWER SUPPLY

GB 2
ADJUSTING THE SOUND
WHEN RECORDING
The VOLUME control may be adjusted with no effect on
therecordedsignal.
FOR PRIVATE LISTENING
Plug in headphones (ø3.5 mm stereo mini-plug) to the
PHONES jack.
When headphones are plugged in, the speakers are
automatically disconnected.
TO ADJUST THE VOLUME
MIN. MAX.
VOLUME
TURN ON / OFF THE SYSTEM
POWER
Press the POWER button to turn the audio on.
TochangetheaudiomodebetweenCD,USBDISK,RADIOandTAPE,settheFUNCTIONswitchwhilethepowerison.
The audio mode is displayed.
TurnofftheunitbypressingthePOWERbutton.
The current time is shown on the display.
The clock is displayed on LCD display at standby mode.on LCD display at standby mode.
1. Press the PROGRAM / CLOCK-ADJ. button,
2. Press the NEXT or BACK to select 12 hours or 24 hours display.
3. PressthePROGRAM/CLOCK-ADJ.button,the hour digit ash.thehourdigitash.
4. PresstheNEXTorBACKtoadjusthourdigit.
5. PressthePROGRAM/CLOCK-ADJ.button,theminutedigitash.
6. PresstheNEXTorBACKtoadjustminutedigit.
7. PressthePROGRAM/CLOCK-ADJ.buttonagain,
the correct time is shown on display.
CLOCK ADJUSTMENT
CLOCK-ADJ.
LCD display
LISTENING TO THE RADIO
2 . Set to RADIO
FUNCTION
RADIO
1 . Turn on the unit by
 pressingthePOWERbutton.
POWER
CD display
3 . Select a MODE. MODE
FM ST. FM MONO
4 . Tune in to a station.
5 . Adjust the sound.
VOLUME
MIN. MAX.
TUNING
FOR BETTER RECEPTION
FM NOTE :
1. FMstereoLEDindicatorlightsifreceiveFMstereobroardcastandtheMODEswitch
set on "FM STEREO".
2. WhentoomuchnoiseisheardduringFMSTEREOreception,setMODEswitchtoFMmono.
AFTER LISTENING
TurnofftheunitbypressingthePOWERbutton.
Unit will be automatically off after 4.5 hours without further operation.

GB 3
6. Press the PLAY/PAUSE button.
Track number "01" & the symbol " " & "CD"
 willbeshownduringnormalcompactdiscplayback.
Track number "001", the symbol " " & "MP3"
 willbeshownduringMP3playback.
Track number "001", the symbol " " & "WMA "
 willbeshownduringWMAplayback.
Track number "001", the symbol " " & "USB"
 willbeshownduringUSBplayback.
COMPACT DISC PLAYBACK
2 . Set to CD
3. OpenthedischolderbypushingtheCDdoor
open button.
4. Insertadiscwiththelabelsidefacingup.
5 . Close the disc holder.
The disc will rotate and
the total tracks of the disc
will show on the display.
FUNCTION
CD/USB
MP3 display
CD display
USB display
WMA display
1 . Turn on the unit by
 pressingthe
POWER button.
POWER
MP3 display
CD display
USB display
WMA display
TO INTERRUPT PLAYBACK
Press the Play/Pause button and the symbol " " will
beashed.Pressthebuttonagaintoresumeplayback.
TO STOP PLAYBACK
Press the STOP / CD/USB button and the display
shows the total tracks of the disc.
TO SKIP TO THE BEGINNING OF A TRACK
• Presseitheroneoftheskipbuttonsaccordingtothedesiredskipdirection.
• Play/back resumes from the selected track.
• Whenthebuttonispressedonceduringplay,theprevioustrackstartsagain.
• Whenthebuttonispressedonceduringplay,thenexttrackplays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keeptheorbuttonpressedduringplayback,
 andreleasethebuttonassoonasyourecognisethe
 desiredpassage.ThennormalCDplaybackwillresumefromthispoint.
CD display
PLAY/PAUSE
REPEAT , REPEAT FOLDER , REPEAT ALL AND MIX PLAYBACK
PressPLAYMODEbuttonduringCDplayback.
CDplayswithasingletrackrepeat,
all tracks repeat or randomly. PLAY MODE
Unitwillbeautomaticallyoffafter30minswithoutanyoperation(instopmode/CDdooropen).

GB 4
PROGRAMMED PLAYBACK
PROGRAMMED PLAYBACK
FOR NORMAL COMPACT DISC PLAYBACK
Programmedplaybackenablestracksonadisctobeplayedin
thedesiredorder.Upto20trackscanbeprogrammed.
1. Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select
the desired track number.
3. Pressthe"PROGRAM"buttonagaintomemorize
the track.
4. Repeat steps 2 and 3 until all desired tracks are
 programmed.
5. Press the " PLAY/PAUSE " button to start.
" " , " PROG " & track number are shown on the
CD display.
6. Pressthe"STOP"buttononcetostopprogrammed
playback.
7. Press the " PLAY/PAUSE " button to resume
 programmedplayback.
8. Open the CD door, turn off the
CD player or press the
" STOP " button twice to clear
 theprogrammedmemory.
Note :
Programmingcanonlybe
made when the player
is in stop mode.
FOR MP3 / WMA / USB PLAYBACK
Programmed playback enables folders/albums or tracks on a
disc to be played in the desired order. Up to 20 folders/albums
ortrackscanbeprogrammed.
1. Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select
the desired track number.
3. Repeat steps 2 and 3 until all desired folders or tracks
 areprogrammed.
4. Press the " PLAY/PAUSE " button to start.
" ", " PROG " and " MP3 / WMA / USB " & track
number are shown on the CD display.
5. Pressthe"STOP"buttononcetostopprogrammed
playback.
6. Press the" PLAY/PAUSE " button to resume
 programmedplayback.
7. Open the CD door, turn off the CD player or press
 the"STOP"buttontwicetocleartheprogrammed
memory.
Note :
Programmingcanonlybe
made when the player is
in stop mode.
MP3 / WMA / USB
display
" PROGRAM "
CD display
" PROGRAM "
Note on CD-R/RW discs
- Becauseofnon-standardizedformatdenition/
production of CD-R/RW,
 playbackqualityandperformancearenotguaranteed.
- ManufacturerisnotresponsiblefortheplayabilityofCD-R/RWduetorecordingconditions,
 suchasPCperformance,writingsoftware,mediaability,etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- ItisrecommendedtorecordonlyaudiolesonCD-R/RWdiscsforeasyreading.
FOR MP3 / WMA / USB PLAYBACK
ModesequenceREPEAT>>REPEATFOLDER>>
REPEATALL>>MIX>>CLEAR.
DuringRepeat1mode,
display shows
DuringRepeat2mode,
display shows
DuringRepeat3mode,
display shows
DuringMixmode,
display shows
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT >> REPEATALL >> MIX >>
CLEAR.
DuringRepeat1mode,
display shows
DuringRepeat2mode,
display shows
DuringMixmode,
display shows CD display
MP3 / WMA / USB display
USB OPERATION
1. Set to USB.
2. Connect USB disk or MP3 player into the USB port.
3. Press the STOP / CD / USB button and
display will show total track & "USB".
4. Press the PLAY/PAUSE button to start playback.
note: USB connector does not support connection with USB extension cable and
 itisnotdesignedforcommunicationwithcomputerdirectly.
Manufacturer is not responsible for the playability of USB disk or MP3 player
 duetorecordingcondition,capacity,interfacecompatibility,etc.
 Duetodifferentformats,someUSBdisksorMP3playersmaytakelongertimetoberead.
USB stick is direct connected or with a cable with max. 0,5 m length.
Unitwillbeautomaticallyoffafter30minswithoutanyoperation(instopmode).
STOP / CD / USB
USB display
FUNCTION
CD/USB

GB 5
RECORDING
USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.
1 . Insert the cassette tape.
2 . Press the PAUSE button.
PAUSE
4 . Prepare to play the source to be recorded and play it.
Recording from the radioRecording from a CD
FUNCTION
CD/USB
FUNCTION
RADIO
PLAY THE CD/USB TUNE INTO A STATION
3 . Press the RECORD button.
RECORD
5 . Press the PAUSE button.
TO STOP RECORDING
Press the STOP / EJECT button.
TO INTERRUPT RECORDING
Press the PAUSE button.
Toresumerecording,pressthePAUSEbuttonagain.
TO ERASE A RECORDED TAPE
1. Set the FUNCTION selector to TAPE.
2. Insertatapewiththesideyouwanttoerasefacingyou.
3. PresstheRECORDbuttontostarterasing.
PAUSE
TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
Toresumeplay,pressthePAUSEbuttonagain.
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/EJECT
buttontostopwindingatthedesiredposition.
PLAY
3 . Press the PLAY button.
TAPE PLAYBACK
1 . Set to TAPE FUNCTION
TAPE
2 . Insert the cassette.
Unit will be automatically off after 4.5 hours
without further operation.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly wiping
with a soft cloth.
IMPORTANT NOTE
If an abnormal display indication or an operating problem occurs,
disconnect the AC power cord and remove the batteries. Wait at least 5
seconds, then reconnect the AC power cord or reinstall the batteries.
WARNING
ShouldtheCDdoorbeopenedbeforethereadingoftheCDcompleted,a
jammingnoisemayoccur.ThisisresolvedbyclosingtheCDdoor.
CLEANING THE TAPE HEADS
Tomaintainoptimumsoundquality,cleantheplayback/
recordheads(a),erasurehead (b), pinch rollers (c),
andcapstans(d)regularly(every10hoursofuse).Use
a cotton swab lightly moistened with cleaning uid or
denatured alcohol.
c d a b
CLEANING CD
If the CD skips or will not play , the disc may need
cleaning.Beforeplaying,wipethedisc
from the centre out with a
cleaningcloth.Afterplaying,
store the disc in its case.
MAINTENANCE
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow several
times on the lens and remove the dust
withthebrush.Fingerprintsmaybe
removed with a cotton swab moistened
with alcohol.

CASSETTE SECTION
Track format: 2 track stereo
Recordingsystem: ACbias
Erasingsystem: Magneticerase6poles
Tape speed: 4.75 cm / sec.
F.F.&REWtime: 170sec.(F-60tapes)
Frequencyresponse: 125Hz-8000Hz(Normaltape)
CD SECTION
Channels: 2 channels
S / N ratio: 60 dB
Wow & Flutter: undetectable
Samplingfrequency: 44.1kHz8xoversampling
Quantization: 1 bit DA converter
Pickuplightsource: Semi-conductorlaser
Pickupwavelength 790mm
RADIO SECTION
Tuningranges: FM87.5-108MHz
Antennas: FM Rod antenna
GENERAL
Outputpower: 1.2W+1.2W(RMS)
Power consumption: 13W
Speaker: 3" 8 OHM
Phones jack: 3.5MM
Power source: AC : 230V~50Hz
 DC:12V(8x1.5VLR14/"C"/UM2)
Dimensions: 288(L)x238(D)x155(H)mm
Weight 2.2KGS
Duetocontinuingimprovement,thefeaturesandthedesignaresubjecttochangewithoutnotice.
Where to place the item :
Today’sfurnitureiscoatedwithawidevarietyoflacquersandsynthetic-coatingsthataretreatedwithanextensiverangeofcleaningproducts.
Therefore, the possibility that some of these substances contain components that react adversely to the rubber feet of the item and soften
them,cannotbecompletelyexcluded.Therubberfeetoftheappliancecancausediscoloringtofurnituresurfaces.Ifnecessary,placethe
appliance on a non-slide surface.
Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany  0900-1520530  (Localcharges)
TheNetherlands  0900-23553626  (Localcharges+1ctp/min)
Belgium  02-6200115  (Localcharges)
France  03-81484280  (Localcharges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
WhencontactingLenco,youwillalwaysbeaskedforthemodelandserialnumberofyourproduct.Theserialnumbercanbefoundontheback
of the device. Please write down the serial number below:
Model: SCR-97 USB
Serial number: _________________________________
LencooffersserviceandwarrantyinaccordancetoEuropeanlaw,whichmeansthatincaseofrepairs(bothduringandafterthewarranty
period)youshouldcontactyourlocaldealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note:
Ifthisunitisopenedoraccessedbyanon-ofcialservicecenterinanyway,thewarrantyexpires.
Thisdeviceisnotsuitableforprofessionaluse.Incaseofprofessionaluse,allwarrantyobligationsofthemanufacturerwillbevoided.
GB 6
SPECIFICATIONS
If at any time in the future you should need to dispose of this product please note that: Waste electrical products
should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local
Authorityorretailerforrecyclingadvice.(WasteElectricalandElectronicEquipmentDirective)