Lenco Stb-100 User manual

STB-100

Set top box with HD DVB-T

User’s Manual

For information and support, www.lenco.eu

- 1 -

Table of Content

1. Main Features ……………………………..……………………………………..4

2. REMOTE CONTROLLER ……………………………………………………...6

3. Welcome Page ………………………………………………………..……..

..8

Installation Gudie

………………………………………………………………8

Program

…………………………………………………………………….……8

5.1

Program Edit

…………………………………………………

…..

……9

5 .1 . 1

Mov e … … ….

… … … … … … … …… … … … … …… … . . … … …

5.1.2

Skip

……………………………………………………………..…….9

5.1.3

Lock

……………………………………………………………..……..9

5.1.4

Delete

……………………………………………………………..……9

5.1.5

Favorite……

…………………………………………………………....10

5.1.6 Rename ……………………………………………………………....10

5.2

EPG

………………………………………………………………..……...10

5.3

Sort

…………………………………………………………………..…….10

5.4

LCN

…………………………………………………………………..…….10

Picture

…………………………………………………………………..……...11

Channel Search

………………………………………………………………..11

7.1

Auto Search

…. ………………………….………………………………….11

7.2

Manual Search..

……………………………………………………………..11

Time

………………………………………………………………………..…..12

Option

……………………………………………………………………..……..12

10.

System

………………………………………………………………………..13

11. USB ………………………………………………………………………….14

11.1

Multimedia

……………………………………………………..……….. 14

11.2

Photo configure

………………………………………………………….15

11.3

Movie configure

………………………………………………………….15

11.4

PVR

configure

……………………………………………………..….. 15

12.

Upgrade by USB

……………………………...……………………..………16

13.

REC

……………………………...……………………………………..………16

14.

PVR Record

………………...…………………………………………..………16

14.1

Full Screen

…………………………………………………………………16

14.2

Delet

……………………………………………………………………..…16

14.3

Renam

……………………………………………………………...……16

Troubleshooting

……………………………...……………………..………18

- 2 -

SAFETY PRECAUTION

CAUTION:

The lightning flash with

arrowhead symbol, within

an equilateral triangle, is

intended to alert the user

to "dangerous voltage"

and to prevent from a risk

of electric shock.

Warning:

To reduce the risk of

electric shock, don't open

the cabinet. Refer

servicing to qualified

personnel only.

The exclamation point

within an equilateral

triangle is intended to

alert the user to important

operating and

maintenance (servicing).

WARNING: Do not use this STB where contact with or immersion in water is a

possibility. Do not use near flower vase, washbowls, kitchen sinks, laundry

tubs, swimming pools, etc.

WARNING: Do not put the candle or lamp stand on the cabinet; otherwise,

there is the danger of fire.

WARNING: The unit should be connected to a power supply only of the type

described in the operating instructions or as marked on the

unit. If you are not

sure of the type of power supply (for example, 120 or

230 V) to your home, consult your local dealer or local power company.

WARNING: This product installs diodes. Do not open the cabinet or touch any

parts in the inner mechanism.

Consult your local dealer for technical service if

the opening is required.

Note: To ensure proper use of this product, please read this User manual

carefully and retain for further reference.

Note: This product installs diodes. Do not open the cabi

net to avoid the unit

direct exposure to radiation.

Unit Cleaning: After the unit power is turned off, you can clean the cabinet,

panel and remote control with a soft cloth lightly moistened with a mild

detergent solution.

Attachments: Never add any

attachments and/or equipment without the

manufacturer consent; as such additions may result in the risk of fire, electric

shock, or other personal injury.

- 3 -

Power-Cord Protection: Place the power-supply cord out of the way, wher

e it

will not be walked on. Please take special attentions to cords at plugs,

convenience receptacles, and the point where they exit from the unit.

Object and Liquid Entry: Never put objects of any kind into this STB through

openings, as they may touch dangerous voltage points or short-

out parts that

could result in a fire or electric shock. Never spill any liquid on the STB.

Note: Moisture may be formed on the lens In the following conditions:



When the unit is suddenly moved from a cold environment or

air-condition room to a warm place.



Immediately after a heater has been turned on.



In a steamy or very humid room.

If the moisture forms inside the unit, it may not operate properly. To correct this

problem, turn on the power and wait about two hours f

or the moisture to

evaporate.

Parts Replacement: When the unit parts need to be replaced, user should

make sure the service technician use the replacement parts specified by the

manufacturer or having the same characteristics as the original part.

Unaut

horized replacement may put the unit In the risk of fire, electric shock or

other hazards.

Safety Check: After all the maintenances and repairs are done, user is required

to request the service technician to conduct the overall safety check to ensure

the machine is In the proper condition.

Packing list

PART QUANTITY

Set top Box 1

Adapter 1

Remote Control 1

Remote Control Battery 2

User Manual 1

Locating: Slots and openings in the cabinet are provided for ventilation to

protect it from overhe

ating. Do not block these openings or allow them to be

blocked by placing the STB on a bed, sofa, or other similar surface, nor should

it be placed over a radiator or heat register.

- 4 -

Preface

Congratulations on your purchase of the set top box, Before operation, please read

this manual thoroughly and keep it well for future reference. This manual will help

you keep abreast with many of the exciting features .

This manual contains important safe measurements and correct operational

information, so please read all the information carefully before use in order to

avoid any damage,

1. Main Features

It’s a set top box with multi-functional full HD HDD player, with the features of

volume delicate and easy to use. It’s a good helper for your entertainment.

DVB-T TV Receiver

Supports Digital Video Broadcasting Terrestrial(DVB-T) reception, Electronic

Program Guide(EPG)

Media-player

Video format: play multifarious video format files, such as: MPEG1,MPEG2

（

MP@ML

）

, MPEG4 ASP@ L5 HD,(DIVX3.0-6.0 )HD, H.264 HD 1080P

Audio format: MPEG-1, MPEG2 (LayerI & II),AC-3, E-AC-3,AAC,HE-AAC

LEVEL2&4, MP3

Picture format: support JPEG, BMP, PNG, TIFF

PVR

Support three recording mode:

EPG Reservation Recording

Manual Reservation Recording

One Button Recording

- 5 -

FRONT PANEL

POWER ON/OFF

USB JACK

Scart cable ,CHANNEL DOWN/CHANNWL UP

REAR PANEL

RF SIGNAL INPUT

,RF SIGNAL OUTPUT

COAXIAL JACK

TV/ SCART

VCR SCART

HDMI

7. DC JACK

- 6 -

How

connect

Please connect TV set and set top box through HDMI cable or Scart cable , in

our rear panel there are 2 Scart connectors and 1 HDMI connector .

Please insert one side of the power adapter into the to DC Jack and the other

side into the AC outlet.

2.Remote Controller

- 7 -

button function button function

power turn on/off the

device fav. my favorite file

mute mute on/off INFO display info

information

number 0-9 channel

number picture 2X8

menu enter the main

menu setup setting information at

TV menu

EXIT exit function AUDIO

Press to change

audio, and choose

EQ mode

p press to

previous page EPG

Press to enter the

Electronic Program

Guide

p press to back

page SUB-T Press to set subtitle

options

CH+ move the

cursor/Channel+ TTX Press to enter TTX

interface

CH- move the

cursor/Channel- play/pause press to play /pause

the file

VOL- move the

cursor/volume -

recording

VOL+ move the

cursor/volume+

Press to stop

recording

OK confirm music press to wake up

back music

Press to fast

forward the

current playback

go to Press to select the

time point

Press to fast

rewind the

current playback

ZOOM

Press to zoom in/out

the image (photo or

video)

COLOR

KEY

FUNCTION

BUTTON Repeat Repeat playing

music, video

- 8 -

3. Welcome Page

When turning the power on for the

first time, the welcome page will be

shown as below:

4. Installation Gudie

(1) Press [CH+/CH-] key to move highlight.

(2) Press [VOL+/VOL-] key to select the

item

(3) Move highlight to [Channel

Search] and press [OK] key to begin

the auto scan.

(4) Press [Exit] key to exit menu.

5. Program

When pressing the [Menu] key to enter the

main menu, which shows as below:

(1) Press [VOL-/VOL+] key to select menu pages among Program, Picture,

Channel Search, Time, Option, System , and USB.

(2) Press [CH-] or [OK] key to enter the “Program Edit”. If Menu Lock is “On”, a

dialogue inquires the password, which is “000000” for default.

(3) Press [Exit] key to go back to main menu.

5.1 Program Edit

When entering the “ALL TV” menu,

which shows as below..

(1) Press [CH+/CH-] key to move the highlight

(2) Press [P /P ] key to execute the Page Up/Page down function.

- 9 -

(3) Press the color key to execute the corresponding functions in “ALL TV”.

5.1.1 Move

(1) Press [CH+/CH-] key to move the highlight

and press [RED] key to make a mark.

There will be a “moving mark” in the right side

of the selected channel as above.

(2) Press [CH+/CH-] key to move the selected

channel to the position that you want to place.

And press [RED] key to confirm your decision.

5.1.2 Skip

(1) Press [CH+/CH-] key to move the highlight and

Press [Green] key to make a “skip mark” in the right

side of the highlighted channel.

(2) After saving and exiting menu, the channel will be

skipped while user change channel in the full screen

5.1.3 Lock

(1) Press [CH+/CH-] key to move the highlight and

press [YELLOW] key to make a “lock mark” can

be seen on the right side of the highlighted channel.

(2) After saving and exiting the menu, the password

dialog will be required while you want to watch the

locked channel.

5.1.4 Delete

Press [CH+/CH-] key to move the highlight and

press [BLUE] key to make a delete dialog then

press [OK] key to delete the channel or [exit]

the key to cancel deleting. After save and exit

“ALL TV” menu, the marked channel will be deleted.

5.1.5 Favorite

(1) Press [CH+/CH-] key to move the highlight

and press the [FAV] key to open the

“Favorite Type” window shown “Disable, Movie,

News ,Sport and Music”.

(2) Press [CH+/CH-] key to move the highlight

among the 4 favorite groups then press [OK] to

- 10 -

make a favorite mark in the left side of the selected Favorite group.

(3) Move the highlight to [Disable] to press [OK] key to cancel the existing

favorite mark.

(4) After marking, pressing [Exit] key to go back to “ALL TV”; there will be a

favorite mark beside the marked channel.

5.1.6 Rename

In “ALL TV” menu, press [CH-/CH+] key to move the

highlight and press [GO TO] key to open the

“Rename” window.

then use the numeric key on the RC to set the TV name.

5.2 EPG

(1) Pressing [CH+/CH-] key to move highlight

and press[OK] key to enter into “Program Guide”

and show EPG information.

(2) Press [Exit] to exit “Program Guide” menu.

5.3 Sort

(1) Press [CH+/CH-] key to move cursor to

“ Sort” then press [VOL-/VOL+] key to change

three kinds of sorting type, “ By LCN,

By service name, By ONID”

(2) press [OK] key to confirm your selection.

5.4 LCN

LCN: To toggle the LCN mode On/Off

6. Picture

Press [MENU] key to display MAIN MENU and

- 11 -

Press [VOL-/VOL+] key to select “ Picture “program

Aspect Ratio

Press [VOL-/VOL+] key to change option item

and press [ OK] key to confirm the selection.

Resolution

Press [VOL-/VOL+] key to change option item

and press [ OK] key to confirm the selection.

TV Format

Press [VOL-/VOL+] key to change option item

and press [ OK] key to confirm the selection

Video Output

Press [VOL-/VOL+] key to change option item

and press [ OK] key to confirm the selection.

7. Channel Search

(1)Press [MENU] key to display MAIN MENU

(2)Press [VOL-/VOL+] key to select

“ Channel Search “program

(3) Press [Exit] key to go back to main menu.

7.1 Auto Search

(1)Press[CH+/CH-] key to option “Auto Search”

(2)Press[OK] enter to “Auto Search” menu and

start scanning

(3) In the “Auto Search” menu, press [Exit] key

to draw back from the scanning

7.2 Manual Search

(1)Press[CH+/CH-] key to option Manual Search”

(2)Press[OK] enter to “Manual Search” menu and

show as below:

(3) Press[VOL-/VOL+] key to option for which country

(4) press[VOL-/VOL+] key to change

- 12 -

“Antenna Power” ON/OFF

(a) If you can scan channel by adjusting “Frequency

Channel” number and press [OK] key to

start scanning

(b)If you scan channel by Frequency(MHz),

“Frequency” and “Bandwidth” are available to adjust.

When you complete your modification,

and press [OK] key, then it will begin to scan.

(5) Press [Exit] key to exit the scanning.

8. Time

(1)Press [MENU] key to display MAIN MENU

(2)Press [VOL-/VOL+] key to select “Time“ program

(3) Press [Exit] key to exit the TIME

Time Offset

Press [VOL-/VOL+] key to change

“AUTO / MANUAL “ type of time offse

Country Region

Press [VOL-/VOL+] key to change

different country region

Time Zone

When the time offset is “manual “,

you can change “GMT+0” value.

Power down after

Press [VOL-/VOL+] key to setup when to

Power down automatically

9. Option

(1)Press [MENU] key to display MAIN MENU

(2)Press [VOL-/VOL+] key to select “Option“

- 13 -

OSD Language

Press [VOL-/VOL+] key to choose the language

Subtitle Language

Press [VOL-/VOL+] key to choose TV subtitle

Language

Audio Language

Press [VOL-/VOL+] key to choose audio language

Digital Audio

Press [VOL-/VOL+] key to choose

digital audio output

PCM/RAM

(3) Press [Exit] key to exit the Opito

10. System

(1)Press [MENU] key to display MAIN MENU

(2)Press [VOL-/VOL+] key to select “System“

Parental Guidance

Press

[CH-/CH+]

key to move cursor and Press [OK]

key to input Password”000000”set the program

parental controlling level

Set password

Press

[CH-/CH+]

key to move cursor and Press [OK]

key to enter the password setting sub menu.

Use the numeric key on the RC to set the new password.

Restore Factory Default

Press [OK] key to enter the sub menu and

Press [OK] key to confirm to restore the default

setting the enter password:”888888” or [EXIT] key

to cancel restore

Information

Press [OK] key to show the system information

(model NO. , SW Version ,HW Version)

- 14 -

11. USB

USB menu will be disabled when the USB

device is unplugged. Media Player List will not

be saved after unplugging USB and/or going to

standby and power off.

NOTE: The USB memory stick should be plug

in the unit directly. USB extension cable should

not be used to avoid failing of data transferring

and interference caused.

(1)Press [MENU] key to display MAIN MENU

(2)Press [VOL-/VOL+] key to select “USB“ program

11.1 Multimedia

(1) Press [CH-/CH+] key to enter the “Multimedia”

(2) Press[VOL-/VOL+] key to select “Music,

Photo, Movie ,PVR “ program

Music

(1)

Press [OK] key to enter “Music”

(2)

Press [CH-/CH+] key to select the music and

Press [OK] key to play the music.

Press [EXIT] key to return up Floder

Photo

(1)

Press [OK] key to enter “Photo”

(2)

Press [CH-/CH+] key to select the Photo and

Press [OK] key to show the picture .

Press [EXIT] key to return up Floder

Movie

(1)

Press [OK] key to enter “Movie”

(2)

Press [CH-/CH+] key to select the movie and

Press [OK] key to play the movie.

Press [EXIT] key to return up Floder

PVR

(1)

Press [OK] key to enter “PVR”

(2)

Press [CH-/CH+] key to select the PVR file and

Press [OK] key to play the PVR .