LENCO Alecto HeeHee User manual

“Bring your favorite cuddly toy alive!”
USER GUIDE

- 1 -
Read the manual
Always scan the QR code inside the packaging artwork of the product HeeHee to go to the latest
Safety requirements
- Don’t attempt to repair or modify any electrical or mechanical functions of this product, this will
declare the warranty as void.
- Replacement of the battery is not possible. Please do not attempt to change these batteries yourself. In-
stead, contact our customer support for repair or replacement information or engage a professional to service
or replace the battery.
- Althought the product is waterproof IPX4, please try to keep the product away from any liquids.
- Disposal of the product into re or a hot oven, or mechanical crush or cutting may damage the included
battery and may result in an explosion.
- Leaving the product with included battery in an extremely high temperature surrounding environment may
result in an explosion or the leakage of ammable liquid or gas.
- Subject the product with included battery to extremely low air pressure may result in an explosion or the
leakage of ammable liquid or gas.
- The battery charger used with the toy should be regularly examined for potential hazard, such as damage
to the cable or cord, plug, enclosure of other parts and that in the event of such damage the toy must not be
used until that damage had been properly removed.
- This toy contains battery that is non-replaceable, only use the supplied USB cable.
- The toy is only to be connected to equipment bearing either of the following symbols or
General information
- For safety reasons, there is a sound limitation set on HeeHee. It is not possible to exceed this.
- Phone calls do not come in via HeeHee.
- Explanation of the colors of the lights
O󰀨 = no connection or battery completely empty
Blue fast blinking = searching for Bluetooth connection
Blue blinking slowly = connected to Bluetooth
Red blinking = low battery
- Press and hold HeeHee button for 3 seconds = on/o󰀨 (once connected, HeeHee remains in phone memory
unless disconnected).
Pressing button HeeHee 3 times in quick succession = disconnect Bluetooth connection between HeeHee
and smartphone immediately.
- Compatible Android versions: 5.0 or higher
- Compatible iOS versions: 10 or higher
version of this product’s user manual. Carefully read this user manual and follow all instructions including the
‘Help’ information. If you still can’t get out, please contact our customer care service. Always keep this in-
struction manual cause it contains important information!

- 2-
CONTENT
Read the manual.............................................................................................................................
Safety requirements..........................................................................................................................
General information........................................................................................................................
How to install ? / How to use ?........................................................................................................
1. Download the HeeHee APP....................................................................................................
2. Allow the APP your Location, Microphone, Files and Media..................................................
3. How to connect HeeHee to your smartphone ?.......................................................................
4. Go back to the HeeHee APP...................................................................................................
5. Overview of the HeeHee device.............................................................................................
6. How to attach HeeHee to your cuddle toy ?...........................................................................
7. Charging and turning HeeHee ON/OFF..................................................................................
8. How to use the App HeeHee ?...............................................................................................
Help.................................................................................................................................................
Disposal of the old device...............................................................................................................
CE marking....................................................................................................................................
Declaration of conformity..............................................................................................................
Connection/installation:
- If HeeHee does not want to connect with Bluetooth, only Hee(BLE) visible, then check if GPS location is
‘on’.
- Only one HeeHee can be connected per smartphone. Because the HeeHee connects to the phone via
BlueTooth, it is otherwise not possible to pass di󰀨erent signals to the HeeHee.
- While installing the app, it is important that you give permission to all rights: location, photos/media, microp-
hone, storage, phone, call lists.
1
1
1
4
4
4
4
5
5
5
6
6
8
9
9
9

- 3-
How to install the QR code

- 4-
How to install ? / How to use ?
1. Download the HeeHee APP
A special smartphone APP is required to use HeeHee.
Download the ‘HeeHee Talk’ APP from the banner below or search in the
Google Play Store / App Store to the application ‘HeeHee Talk’.
2. Tap and hold the HeeHee APP and allow the APP HeeHee your Location, Microphone, Files and media
3. How to connect HeeHee to your smartphone ?
First open the HeeHee APP and click ‘OK’ in the pop-up.
Turn on the HeeHee button by pressing the power button
(see paragraph ‘5. Overview’) for 5 seconds.
Android users:
In Bluetooth settings turn the Bluetooth ‘ON’ and
select ‘HeeHee’
iPhone users:
In Bluetooth settings turn the Bluetooth ‘ON’ and
select ‘HeeHee’
Note: Don’t select ‘Hee(BLE)’
CLICK
HeeHee Talk
Use the QR code
to download the app
and follow the instructions on page 3.
HeeHee Talk
Select Remove Uninstall
1 2 3
Allowed
ALLOWED
NOT ALLOWED
Call logs, Files and media, Location, Microphone and
Phone
Privacy
Installed
Notications
Permissions
Files and media
Microphone
Location
App info
HeeHee Talk HeeHee Talk
HOLD
TAP
TAP
Media
ALLOW
THOSE
3
Bluetooth
On
Make sure the device you want to connect
to is in pairing mode. Your phone (XXXX) is
currently visible to nearby devices.
Available devices
Hee(BLE)
HeeHee
XXXXXX
ON
SELECT

- 5-
4. Go back to the HeeHee APP
Always wait for the pop-up
“Successful” to appear in the APP.
Select your preferred language in
the settings; EN English, NL Dutch,
FR French, DE German
You can also check in the settings
of the APP if the HeeHee is
connected correctly.
5. Overview of the HeeHee device
6. How to attach HeeHee to your cuddle toy ?
Accessories needed:
- Your favorite cuddle toy
- Velcro tape: 1 hook and 3 loops.
- Needle and thread
The hard side of the Velcro is called the hook.
1. Stick the hard side with the glued side to the back side of button HeeHee.
The soft side of the Velcro is called the loop.
Secure the soft side without glue to the cuddle toy by sewing it with needle and
thread. If you have a cuddle toy with hard plastic parts, you can also attach the
Velcro by sticking it with the glued soft part.
Tip: It’s possible to attach button HeeHee to more than 1 cuddle toy because of the 3 included soft sides.
Speaker
LED Microphone
Attachment hook
for safety pin
Power ON-OFF
Play/pauze
USB-C
Charging port
Not Connected

- 6-
7. Charging and turning HeeHee ON/OFF
8. How to use the App HeeHee ?
Charging time: appr. 3 hours
Usage time:
- Constantly connected with Bluetooth (for example when crying detection is
activated): 6 to 7 hours
-
Note:
-Battery saving after 30 minutes of no use in the APP, then Bluetooth connection
will be broken.
Long press
for 5 seconds
to turn ON/OFF
Use original
USB-C cable
to charge
HOLD
Sidenote:
Adults can also use the HeeHee to let the cuddly toy speak to their loved ones.
You can use it for a marriage proposal / making up after a ght or use it for a surprise event.
Battery related:
- If the battery is low, and in ‘Settings’ the Battery low push notication is activated, you’ll receive a pop-up in the
app every minute.
- HeeHee battery charging takes about 3 hours. Red light o󰀨 and connected to power = battery charged.
- It is possible to use HeeHee as normal when it is connected to power.
MENU PHRASES

- 7-
PLAYLIST IMITATION
CRY DETECTION
SONGS
TIMER
STORIES
MICROPHONE SETTINGS
Songs are played through APP,
not through the HeeHee locally.
It is not possible to change the
le name of a playlist. If you
want to change the playlist
name you need to create a
new playlist.
The imitation function on Hee-
Hee only works within Bluetooth
range.
- VOX levels explain in
manual 1-Low to 6-High 2.
- When the HeeHee is
outside 10 meters from
the smartphone (or if there
is Bluetooth connection),
you will not receive a push
notication in case of cry
detection.
- Limited memory on
HeeHee itself. Outside
Bluetooth range, the timer/
cry detection
function, extra recorded
songs/voices cannot be
played.
- Due to limited memory on
the HeeHee itself, it is not
possible to play recorded
songs or texts outside the
Bluetooth range.
Due to a limited
memory on the
HeeHee itself, it is
not possible to play
recorded songs or
texts outside of the
Bluetooth range.
Outside Bluetooth
range, the microp-
hone function does
not work properly.
Microphone then
falters.

- 8-
Help
Can’t connect to HeeHee ?
• Is HeeHee turned on?
Press and hold the power button on the frontside of HeeHee for ve seconds to turn the
power on. If HeeHee is almost out of battery, you’ll see a red light, please charge it using the provided
charging cable. If the light won’t turn on, the battery is completely empty. You rst need to charge the
HeeHee before you can use it.
• Are you close enough to HeeHee?
Make sure you are within 10 meters (without any obstacles) from HeeHee to connect with Bluetooth.
• Is HeeHee connected to another smartphone?
HeeHee can only be connected to one smartphone at a time. Disconnect HeeHee from the
paired smartphone and try again.
• Is your smartphone connected to other Bluetooth devices?
Please make sure that your smartphone is not connected to any other device via Bluetooth.
Even in case you were able to pair HeeHee to your smartphone while being connected to
another Bluetooth device, HeeHee may not function properly. Please disconnect all Bluetooth
devices before pairing with HeeHee.
• Are you near a microwave or other equipment that emits electromagnetic waves?
Please use HeeHee away from equipment that emits electromagnetic waves.
“HeeHee” doesn’t show up on my smartphone Bluetooth device selection screen.
• Please try the following:
- Open “Settings” on you smartphone. Disable Bluetooth and then try turning it on again.
- Turn o󰀨 the HeeHee device and try returning it on again.
Cannot operate APP even though smartphone and HeeHee device are properly paired.
• Is your smartphone paired with any Bluetooth device other that HeeHee?
Even in case you were able to pair HeeHee to your smartphone while being connected to
another Bluetooth device, HeeHee may not function properly. Please disconnect all Bluetooth
devices before pairing with HeeHee.
HeeHee can’t be turned on.
• Press and hold the power button for 5 seconds.
Press and hold the power button at the backside of HeeHee for ve seconds to turn on the
power.
• Is HeeHee fully charged?
- Please fully charge HeeHee using the provided charging cable.
- HeeHee may be broken. Please contact Alecto customer service: [email protected]

- 9-
The app keeps terminating abnormally.
•The problem may be due to insu󰀩cient memory on your smartphone. Please close other apps that are
running or restart your smartphone and see if there is an improvement. Refer to your smartphone manual
for operating instructions.
I’m changing my smartphone and want to transfer HeeHee data to my new phone.
• It’s not possible to transfer data from HeeHee to your smartphone or computer.
For malfunctions and repairs
Please contact Alecto customer service: [email protected]
Customer support
E-mail: [email protected]
Disposal of the old device
This symbol indicates that the relevant electrical product or battery should not be disposed of as
general household waste in Europe. To ensure the correct waste treatment of the product and battery,
please dispose them in accordance to any applicable local laws of requirement for disposal of electrical
equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of
environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic
Equipment Directive).
CE Marking
This product is in compliance with the essential EU directive requirements.
DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type Alecto HeeHee is in compliance with directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://DOC.hesdo.com/HeeHee_DOC.pdf

www.alectobaby.com v1.0
Commaxx B.V.
Wiebachstraat 37
6466NG Kerkrade
The Netherlands