LenelS2 5000 Series User manual
Quick Installation Guide
LenelS2 Readers - 5000 Series Economy
UTC Fire & Security BV
UTC Fire & Security EMEA
Carrier Fire & Security EMEA
Kelvinstraat 7 6003 DH – Weert,
The Netherlands
Tel: +31 (0)495 58 30 00
Fax: +31 (0)495 55 00 42
Email: cs.edc@carrier.com
For all local contact details, please consult
the Carrier Fire & Security webpage:
https://resecurityproducts.com/en/contact.php
Contact info
Contact info
For all local contact details, please consult the
UTC Fire Security webpage:
Product Warnings and Disclaimers
Quick Installation Guide
LenelS2 Readers - 5000 Series
UTC Fire & Security BV
UTC Fire & Security EMEA
Carrier Fire & Security EMEA
Kelvinstraat 7 6003 DH – Weert,
The Netherlands
Tel: +31 (0)495 58 30 00
Fax: +31 (0)495 55 00 42
Email: cs.edc@carrier.com
For all local contact details, please consult
the Carrier Fire & Security webpage:
https://resecurityproducts.com/en/contact.php
Contact info
Options for the tamper alarm
The reader support both break off and opening protection. If needed the break off protection can be
disabled with the red tray in the accessories bag.
To open the reader: Use the reader opening tool (LNL-RS0000-O1) to avoid any damage to the front
cover and/or mounting plate, remove the front cover from the mounting plate as shown on the picture
to the right.
1. Mount the bracket plate on the wall using supplied
screws.
2. Assemble the tamper alarm switch tray as shown in
the picture.
3. Remove the spring from the reader tamper alarm
switch.
4. Assemble the reader. Tamper alarm will be normal
state as long as the reader is assembled. If the reader
is disassembled the tamper alarm is activated.
Contact info
For all local contact details, please consult the
UTC Fire Security webpage:
Product Warnings and Disclaimers
Quick Installation Guide
LenelS2 Readers - 5000 Series
UTC Fire & Security BV
UTC Fire & Security EMEA
Carrier Fire & Security EMEA
Kelvinstraat 7 6003 DH – Weert,
The Netherlands
Tel: +31 (0)495 58 30 00
Fax: +31 (0)495 55 00 42
Email: cs.edc@carrier.com
For all local contact details, please consult
the Carrier Fire & Security webpage:
https://resecurityproducts.com/en/contact.php
Contact info
Installation guide
Lenel Readers -
5000 Series Slimline
Quick Installation Guide
LenelS2 Readers - 5000 Series
Slimline Economy
BZ
R-LED
G-LED
GND
D0
D1
RXD
TXD
GND
DC+
External Buzzer control
External Red LED control
External Green LED control
Ground
Wiegand Data1
Wiegand Data0
RS232 -
RS232 +
Power supply
Power supply 9 to 12 VDC
x
x
x
-
x
x
-
-
x
x
-
-
-
-
-
-
x
x
x
x
BZ
R-LED
G-LED
GND
D0
D1
RXD
TXD
GND
DC+
P3
Quick Installation Guide
LenelS2 Readers - 5000 Series
Slimline Economy 13.56 MHz
Wiegand / RS232
Quick Installation Guide
LenelS2 Readers - 5000 Series
Slimline Economy 13.56 MHz
OSDP / RS485 Converter
Note: For more information about
OSDP / RS485 converter see Lenel
Reader 5000 Series Slimline
Economy Installation Guide
PIN Description Wiegand RS232
Terminal description
P3
Please note that this is only a quick installation guide.
Information regarding recommendations, measurements and accessories are
available in the full version of the LenelS2 Readers - 5000 Series Economy installation guide.
Please consult table in full installation manual on how the LED-settings will affect
current draw.
Power consumption:
Model Current draw (idle) Current draw (peak)
Slimline Economy 13.56MHz 12 VDC 12 VDC
Wiegand 35 mA 92 mA
OSDP 46 mA 114 mA
Notes
1. Maximum wiegand cable length is 150 meters and requires
a high quality shielded cable with minimum AWG18 dimension
(=0.8231mm2) in an environment free from electrical noise.
A cable with smaller dimension or an installation environment with
electrical disturbances will reduce the maximum cable length.
2. Wiegand requires dedicated wires for external control of Green LED,
Red LED, Buzzer and Keypad backlight.
3. OSDP / RS485 converter connector, supports a wire diameter from
20 to 24 AWG. Requires twisted pair cable.
A
B
GND
DC+
RS485+ / OSDP
RS485 - / OSDP
Power supply
Power supply 9 to 12 VDC
Letter Description
This manual suits for next models
1
Other LenelS2 RFID System manuals
