Lennox Hearth Products VISION Elite Series User manual

Transform a drafty metal or masonry fireplace into
an efficient, clean-burning source of heat that delivers
a gorgeous on-demand fire.
ELITE™ SERIES gAS FIREPLACE INSERTS

■ Finally, there’s an easy and attractive solution to the drafty metal or masonry fireplace. Elite™Series gas inserts from
Lennox fit perfectly into almost any traditional fireplace opening to instantly transform it into a warm and mesmerizing
centerpiece. Each model features finely detailed split oak-style log sets, glowing ember beds and a fully adjustable
flame that dances with vibrancy and realism. To keep you cozy and warm, Elite gas inserts can heat up to a 2,000 sq. ft.
room by combining up to 35,000 BTU/hr, 89% efficiency, and a variable speed, heat-activated blower that can be
controlled from the unit, a thermostat or an optional remote control. And to help you customize the look of the insert to fit
your room décor, there are attractive style and accessory options available. ■
EDVI30 shown with optional bay window, brushed stainless steel louver kit and medium surround kit.
2

LOUVERLESS
Shown with Style View™doors
and flat surround.
BAY WINDOW
Shown with bay front door kit, louver kit,
beveled surround and hearth riser.
Elite™Series gas inserts from Lennox can be customized in a variety of styles. Choose a louverless look, a bay
window front or a traditional louvered design to meet your specific installation requirement and achieve
the appearance you desire. Each style also offers a variety of optional accessories so you can get the look
that best reflects your taste.
Style and accessory options
REQUIRED ACCESSORIES
Bay Door and Louver Kits
Charcoal Gold
Brushed stainless steel
REQUIRED ACCESSORIES
Style View™Doors
Charcoal Textured iron
Satin pewter and charcoal Satin pewter
NOTE: Charcoal Bay Door and
Louver Kit is standard. Also
shown are gold and brushed
stainless steel kits with
optional bay window trim.
NOTE: A flat or beveled surround can be used with each
door or louver option. This applies to all Louverless,
Bay Window and Traditional styles.
3

3 4
5 6
STANDARD FEATURES
a. Heat-activated blower
with variable speed control
conveniently located on
the surround
b. Split oak-style ceramic log set
features realistic detail for
an authentic look
c. Realistic dancing flames,
glowing logs and embers
Standing pilot millivolt
system – does not require
electricity, so even if the
power goes out, the fireplace
can be lit to provide a
source of heat.
All backed by the Lennox
20-year limited warranty
STANDARD FEATURES (FOR ALL STYLES)
TRADITIONAL LOUVERS
Shown with flat louver kit,
twin pane door kit and beveled surround.
OPTIONAL ACCESSORIES (FOR ALL STYLES)
OPTIONAL ACCESSORIES
1. Brickaded Interior Kit
2. Hearth Riser Kit
3. Remote Control
4. Thermostat
5. Flat Surround
recommended for irregular-
shaped openings and inside fit
installations (trimmable and
provided unpainted)
6. Beveled Surround
recommended for outside
fit installations
NOTE: A flat or beveled
surround can be used with
each door or louver option.
4
REQUIRED ACCESSORIES
OPTIONAL ACCESSORIES
Twin Pane Door Kit
Charcoal
Flat Louver Kits
Charcoal
Brushed stainless steel
Gold
1 2
b ca

5
MINIMUM CLEARANCE TO COMBUSTIBLES
MODEL ADJACENT WALL INSERT TO MANTEL FLOOR MINIMUM*
EDVI25 8" minimum 12" to 15-1/2" minimum** 0" to non-combustible
EBVI25 8" minimum 12" to 15-1/2" minimum** 0" to non-combustible
EDVI30 8" minimum 12" to 18" minimum** 0" to non-combustible
EBVI30 8" minimum 12" to 18" minimum** 0" to non-combustible
EDVI35 8" minimum 12" to 18" minimum** 0" to non-combustible
* Requires up to 16" hearth extension from fireplace face. If hearth is elevated 7" min.,
no hearth extension is required. Refer to owner’s manual.
** Minimum mantel height from top of louvers varies depending on mantel projection.
Please refer to owner’s manual.
MINIMUM FIREPLACE OPENINg
MODEL FRONT WIDTH (A) HEIGHT (B) DEPTH (C) BACK WIDTH (D)
EDVI25 27" 19" 14-1/2" 23-1/4"
EBVI25 27" 19" 14-1/2" 23-1/4"
EDVI30 26-1/2" 22" 14" 22-1/2"
EBVI30 26-1/2" 21" 14" 22-1/2"
EDVI35 32-1/4" 25" 17" 25"
A
B
D
C
SPECIFICATIONS
MODEL GAS BTU/HR ENERGUIDE STEADY STATE
*
EDVI25 NG 25,000 65% 86%
LP 25,000 66% 89%
EBVI25 NG 25,000 64% 79%
LP 25,000 68% 81%
EDVI30 NG 30,000 69% 87%
LP 28,000 70% 89%
EBVI30 NG 30,000 62% 83%
LP 28,000 60% 82%
EDVI35 NG 35,000 66% 86%
LP 34,000 70% 88%
*Based on maximum vent configuration.
DIRECT-VENT AND B-VENT OPTIONS
Elite™Series gas inserts are available in two venting
configurations. Direct-vent models receive 100% of their
combustion air from outside of the home for greater
efficiency and are ideal for airtight homes. We also offer
B-vent inserts that draw combustion air from inside the
home so they require less chimney flue space for ducting.
Both systems feature ceramic glass panels that seal the
combustion area for efficiency and safe indoor air quality.
DIrEcT-VENT
Draws combustion air from
outside and returns combustion
exhaust back to the outside of
the house.
B-VENT
Draws combustion air from
inside the home and vents
combustion exhaust to
the outdoors.
Outside Exhaust
Outside Intake
Warm Air Out
Sealed
Combustion Area
Ceramic Glass
Ceramic Fiber
Log Set
Cool
Room Air In Air Blower
Outside Exhaust
B-vent
Warm Air Out
Sealed
Combustion Area
Ceramic Glass
Ceramic Fiber
Log Set
Cool
Room Air In Air Blower
Typical Fireplace
Front View
Side View

DIMENSIONS
DIRECT-VENT INSERTS
EDVI25 EDVI30 EDVI35
A26-5/8" ( 676 mm ) 25-15/16" ( 659 mm ) 32-1/4" ( 814 mm )
B20-1/2" ( 521 mm ) 22-1/4" ( 578 mm ) 24-1/4” ( 614 mm )
C13-3/8" ( 356 mm ) 13-3/8" ( 341 mm ) 16-7/8" ( 427 mm )
Beveled Surround
Small 41-1/16" ( 1043 mm ) 40-1/4" ( 1022 mm ) N/A
DMedium 44-1/8" ( 1121 mm ) 45-3/4" ( 1162 mm ) 48-1/16" ( 1221 mm )
Large N/A 49-1/4" ( 1251 mm ) N/A
Small 26-1/16" ( 662 mm ) 27-1/2" ( 699 mm ) N/A
EMedium 27-5/8" ( 702 mm ) 30-1/4" ( 768 mm ) 34-1/16" ( 865 mm )
Large N/A 30" ( 762 mm ) N/A
Flat Surround*
D 48" ( 1219 mm ) 48" ( 1219 mm ) 50" ( 1270 mm )
E 34" ( 834 mm ) 34" ( 834 mm ) 40" ( 1016 mm )
F19-1/2" ( 483 mm ) 20-7/8" ( 530 mm ) 26-11/16" ( 678 mm )
G1-15/16" ( 49 mm ) 1-15/16" ( 46 mm ) 1-15/16" ( 46 mm )
H see note** 9-15/16" ( 252 mm ) 9-7/8" ( 251 mm )
I1-1/4" ( 32 mm ) 1-9/16" ( 37 mm ) 1-5/8" ( 41 mm )
J17-1/4" ( 438 mm ) 20-1/4" ( 514 mm ) 24" ( 610 mm )
K15-1/2" ( 405 mm ) 15-1/4" ( 387 mm ) 18-3/4" ( 467 mm )
L 10-7/8" ( 276 mm ) 11-3/16" ( 284 mm ) 15-5/8" ( 397 mm )
M24-7/8" ( 632 mm ) 23-1/4" ( 591 mm ) 29-7/16" ( 748 mm )
B-VENT INSERTS
EBVI25 EBVI30
A26-1/2" ( 675 mm ) 26-1/16" ( 662 mm )
B20-1/2" ( 520 mm ) 22-3/8" ( 568 mm )
C13-5/8" ( 340 mm ) 13-5/8" ( 340 mm )
Beveled Surround
Small 41-1/16" ( 1043 mm ) 40-1/4" ( 1022 mm )
DMedium 44-1/8" ( 1121 mm ) 45-3/4" ( 1162 mm )
Large N/A 49-1/4" ( 1251 mm )
Small 26-1/16" ( 662 mm ) 27-1/2" ( 699 mm )
EMedium 27-5/8" ( 702 mm ) 30-1/4" ( 768 mm )
Large N/A 30" ( 762 mm )
Flat Surround*
D 48" ( 1219 mm ) 48" ( 1219 mm )
E 34" ( 834 mm ) 34" ( 834 mm )
F19-3/8" ( 493 mm ) 20-7/8" ( 530 mm )
G1-15/16" ( 49 mm ) 1-15/16" ( 46 mm )
H11-1/4" ( 282 mm ) 11-1/4" ( 292 mm )
I1-1/4" ( 31 mm ) 1" ( 25 mm )
J17-5/16" ( 439 mm ) 20-1/8" ( 508 mm )
K15-1/4" ( 388 mm ) 15-5/8" ( 384 mm )
L 10-7/8" ( 276 mm ) 12-3/8" ( 314 mm )
M 24-7/8" ( 632 mm ) 23-3/4" ( 595 mm )
* The flat surround is provided unpainted and is designed to be custom
trimmed by your installer to fit the shape and dimensions of an inside
fit installation. Paint after trimming. See installation instructions for
complete information.
** Air inlet = 10-9/16
" ( 268 mm ) and
Exhaust outlet = 9-5/8
" ( 224 mm )
© Lennox Industries Inc. 2007
Visit us at www.lennox.com, or contact us at 1-800-9-LENNOX.
Products You can count on
Lennox is committed to providing you with high-quality products.
A qualified dealer can help you find the right product to give you
years of comfort and enjoyment.
NOTE: Diagrams, illustrations and photographs are not to scale –
consult installation instructions. Product designs, materials,
dimensions, specifications, colors and prices subject to change or
discontinuance without notice. Square-foot heating capacities are
approximations only. Local conditions, such as elevation, wind, vent
configuration and choice of fuel will affect the overall appearance of
the fire and heating performance. Performance can also vary with
home design and insulation, ceiling heights, climate, accessories
chosen, appliance location and how the appliance is operated.
Approved to U.S. and Canadian safety and performance standards
– ANSI Z21.88/CSA 2.33-M98 vented gas fireplace heaters.
785127M Rev. 10 3/07
PC49175