Lenovo ThinkPad Hard Disk Drive User manual

ThinkPadBluetoothLaser Mouse
UserManual

Aboutthismanual
Thankyouforyourpurchaseof thisBluetoothmouseset. Thistopics covered inthismanualare
listed asfollowing.
(Thismousewillbe soldwithoutdongle.)
Introduction
InstallingandtheBatteries
InstallingandUninstallingtheWIDCOMMBluetoothStack
SettinguptheLaserMouse
UsingtheLaserMouse
UsingtheWIDCOMMBluetoothStack
Troubleshooting

1.Introduction
Features
LaserMouseFeatures
Withscrollwheeland twobuttons、tilt wheel
Powersavingmode
LEDindicator
a. Amber：Lowbattery
b. Flashinggreen: mouseispairing
USBBluetoothDongleFeatures
Bluetoothspecification v1.2andv2.0compliant
Supportsmouse
SupportsadditionalBluetoothdevices
SystemRequirements
Bluetooth/ USB mousesupported computer
Microsoft Windows98/ME/2000/XP orlater

2. InstallingtheBatteries
The mouseneedstwoAA sizebatteries.Followthe stepsbelowtoinstallthe batteries.
1. Press the button and thebatterycoverpopsout.
2.Installtwo"AA"batterieswhileobserving the polarity(+and -)indicatedinside the mouse.
3. Replacethebatterycover

3Installing and Uninstalling the
WIDCOMM Bluetooth Stack
3.1InstallingtheWIDCOMM BluetoothStack
BeforeinstallingtheWIDCOMM Bluetoothstack, plug the USB BluetoothdongleintoaUSB
port of yourcomputer.
1. Insertthe provided InstallationCD inthe CDROMdrive.
2. The installation stack loadsautomatically. Ifnot, click the
Setup.exe inthebinfolderof the CD ROM.
3. The welcomescreen introducesyou tothe installation process. Click Next tocontinue.
4. Read theagreement and select “Iaccepthetermsinthelicenseagreement”. Click Next to
continue.

5.Theprogramwillbeinstalledinthe folderasshown.Click Change toinstallinadifferentlocation.
Click Next tocontinue.
6. Click Install tostart theinstallation. Theinstallationmayneed sometimetocomplete.
7. The following screen appearstoindicatetheinstallation iscomplete.

8. Removethe dongleandplug itback in, the mousewillpairautomatically. Click Finish toexit
the installation.
The followingprompt requiresyou torestart thecomputersothat theBluetoothstack takes
effect. Click Yes torestart yourcomputernowor No torestartlater.
3.2Uninstalling theWIDCOMM BluetoothStack
Followthe stepsbelowtouninstallthe WIDCOMM Bluetoothstack fromyourcomputer.
1. Removethe USB Bluetoothdongle.
2. Click Start>Settings>Control Panel >Add/Remove
Programs.
3. Select WIDCOMMBluetoothSoftware fromthe programlist andclick Remove.
4. The systemstartstoremovethe program, itmaytakesometimetouninstall.
5.When theprogramhasbeen removed, aprompt requiresyou torestart the computer. Click Yes
torestart yourcomputernowor No torestartlater.
4. Setting up theLaserMouse
4.1QuickPairing inWindows
The Bluetoothmousehasbeen set toapre-pairing mode asthe factory default.Forquick pairing, enablethe
pre-pairing mode following the stepsbelow.
1. Plug the USBBluetoothdongleintoaUSBportofyourcomputer.
2. Forthe mouse, press the pairing button atitsbottom.
Pairing button

3. Press the button on thebottomof the USB Bluetoothdongleuntilthe LEDbeginstoflash
onceeverysecond.Thisindicatesthe. Bluetoothdonglehasstarted tosearchfordeviceto
be paired.( Thismousewillbesoldwithout dongle.)
4. Moveyourmousetoensuretheyareconnected.
Enablingthefunction ofUSBmouseinBIOS
If the mousefailedtowork(referto 7Troubleshooting”onpage14 formoreprobable
conditions), check that the USB functionof themousehasbeen enabled intheBIOSsetup.
SomeoldPCsystemsdo not support the USBkeyboard/mousein
BIOS/DOSenvironment.
4.2PairingonWIDCOMM BluetoothStack
Beforeusing the Bluetoothstack formousepairing,installthestack asinstructed in 3Installing
andUninstallingtheWIDCOMMBluetoothStack”.Then followthe stepsbelow.
1.Press the USB Bluetoothdonglebutton untilthefollowing Human InterfaceDevice(HID)screen
appears.

2.Whenthe mouseisconnected, the following confirmation message appears. Click toconfirm
that the correct mouseisconnected.

5Using theLaserMouse
Afterplugginginthe USB Bluetoothdongleandsetting themouseintheBluetoothconnection
environment asdescribedin 4.SettinguptheLaserMouse”, youcan beginusing the mouse
immediately.
5.1Power Statusof theLaser Mouse
The BluetoothmousehasabatterystatusLED.Whenthe batteryrunsout,
the LEDturnsamber. You shouldchange thebatteriesimmediately
.(The top LEDindicateisthe samewithbottomLED)
Toviewmoredetailedinformationonthemousebatterystatus, go tothe Controlpanel>Mouse >
Bluetooth.
LED