Lenovo TAB 2 A10-70 User manual

Lenovo Archer Quick Start Guide
(ANDROID)
* For reference only, please refer to our actual product.
* keyboard is only for Archer Tablet 2-10xx.
The “xx” represent tablet module number, such as: 50F

Printed in China
Learn more
Legal notices
First Edition (August 2014)
© Copyright Lenovo 2014.
For more information about tablet functions and useful manuals, go to
http://support.lenovo.com/. To read this manual on your tablet, please access “User
Guide” from the Browser favorites in your tablet.
Getting support
For support on network service and billing, please contact your wireless network operator.
For instructions on how to use your tablet, go to http://support.lenovo.com/ .
Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries,
or both.
Other company, product, or service names may be trademarks or service marks of others.
252-01467L-A0XUS
FPO

Calculated by 2 hours in normal daily use.
*
Key can not use on Android OS.
1

The Bluetooth Keyboard Cover can be used to control a tablet using distinctive orange
combination keys (for details, see special function keys) .
The keyboard and the tablet can be combined for easy carrying.
Introduction*
Bluetooth Pairing
Turn the keyboard's power switch to power up the keyboard. The keyboard will attempt
to connect to last connected device. The indicator will be blue.
has been set to Bluetooth for more than one second, the keyboard will enter into pairing
mode to pair with the tablet, and the keyboard can be discovered by other devices.
If the pairing is successful, the indicator will turn off.
When LED keep ashing RED, It means battery needs to change, please take battery out
and change battery, please use standard CR-2025L/BN coin battery to prevent damage
of key board.
Battery Change
Step 1 Step 2

Combining with a tablet and folio
When not to use, caefully insert keyboard into folio holder and attached key board to
folio, the magnetic clip will hold the keyboard in posotion. When using the tablet,
open the folio cover to use the standing position.
Status indicator
Flashing red
Flashing blue slowly
Attempting to connect to last connected device. If it
connects successfully, the indicator will turn off after being
on for two seconds.
Flashing blue
quickly
The keyboard is in the pairing mode and can be discovered
by other devices. If the pairing is successful, the indicator
will turn off after being on for two seconds.
23
45
1
6

Connecting to a tablet setup
If the Bluetooth Keyboard Cover has previously connected to the tablet successfully,
it will automatically connect to the tablet via Bluetooth when it is turned on. If the
connection fails, check the tablet to see if Bluetooth is set to ON and then reconnect
using the previous four steps.
Selecting the Preferred Language
After paring with the tablet, please follow the steps and the image below to select your
preferred language.
2. Select the language you want to use.
1. In the tablet setting menu, choose Language & Input
3. In keyboard & Input Methods, select the keyboard language you want to use.
Step1:
discovered by other devices.
Step 2: On the tablet, choose Settings >Bluetooth and set Bluetooth to “On” .
Step 3: A prompt indicating that the keyboard is SEARCHING is displayed in the center
of the tablet screen. If no prompt is displayed, select SEARCH FOR DEVICE
in the upper right corner of the tablet screen.
Step 4: Select Lenovo Archer Keyboard from the list of available devices on the tablet
screen. When the prompt indicating that the has been connected isArcher
displayed, the keyboard has successfully connected to the tablet.
Turn the keyboard's power switch on.
set the pairing switch to the Bluetooth logo for one second or longer.
Archer