USER’S MANUAL
Cautions
Keep loose clothing, fingers, hair, jewelry and other foreign objects away,
Do not insert anything into the machine other than laminating films and suggested items.
Always unplug the unit when not in use to prevent accidents.
Don’t operate the unit with a damaged power supply cord.
Safety Instructions
Your safety as well as the safety of others is important. In this manual as well
as on the product are important safety instructions. Please read and retain
these instructions.
Read all instructions before use. Save these instructions for late use.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning, if needed the housing can
be cleaned with a cloth dampened with a mild soap and water solution.
This machine is not a toy, keep children and pets away at all times as
serious injury may result.
The object to be laminated CANNOT be metal objects(iron, aluminium, copper, etc.)
Please do not insert anything into the machine other than laminating films and
suggested items, the machine is only to be used for laminating.
Never disassemble repair, or redesign the machine on your own, when necessary,
please contact specialist for repairs.
Always turn off and unplug the machine when sensing a strange order or when the
machine is not in use.
To reduce the risk of electric shock, if the appliance has polarized CE approved
plug(one blade is wider than the other),this plug will fit in a polarized outlet only one way,
if the plug does not fit fully in the outlet, reverse the plug ,if it still does not fit, contact a
qualified electrician to install the proper outlet. Please do not change the plug in any
way if the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or similarly qualified person in order to avoid a hazard.
Never use the machine near a stove or in a humid environment, do not touch the
plug with wet hands or immerse the base in any liquid.
Prevent possible damage of the plug and power cord and never drag or twist
them, do not operate after the machine malfunctions or with damaged power
cord and plug.
The socket-outlet shall be installed near the equipment and shall be
easily accessible.
For indoor use only.
For office use only.
BE SURE THE 2 POSITIONS SWITCH IS IN THE ‘OFF’ POSITION BEFORE
PLUGGING IN THE LAMINATOR.
Functions
This machine can be used with warm laminating films. The items being laminated can
be cards, documents, pictures, paper etc. but must be no thicker than 100mic.
Operation
1. Insert the power plug into an electrical socket.
2. Push the ON/OFF switch on ”ON” position. A red indicator will light up and the
motor will start up, but the green indicator light will NOT light up
3. Wait 3 minutes for the machine to warm up. Once it has reached the required
temperature, a green indicator will light up
4. Put the item being laminated into a laminating pouch leaving a 3mm-6mm border
from the sealed end of the pouch
5. Insert them together into the entrance of the laminator, closed side first. They will
be laminated automatically.
Remarks
In order to avoid creasing, please DO NOT insert the open side of the film into the
laminator first. Please follow the guide lines in front of the entrance when inserting to
make sure that your film is inserted directly into the entrance.
When finished laminating
When the film exits after being laminated, it may be very hot and soft. Handle the
laminated pouch with care, Pressing the item with a book or other heavy objects may
help make it flat and smooth.
Care And Cleaning
