Leupold RX-FullDraw 3 User manual

Surface texture, color, size, and shape of the target all affect
reflectivity, which in turn affects the maximum range of the
instrument. As a rule of thumb, brightly colored targets are much
more reflective than darker targets. Tan game coats are more
reflective (and thus provide a more solid reading) than a black roof.
A shiny surface is more reflective than a dull surface. Smaller targets
are more difficult to range than larger targets. Light conditions, haze,
fog, rain, and other environmental conditions can all affect ranging
performance. Any factor which degrades air clarity will reduce the
maximum effective range. The sun generates infrared energy that
can degrade ranging performance in bright conditions or when
ranging towards the sun.
RX-FullDraw 3 Specifications
The RX-FullDraw 3 digital laser rangefinder provides useful modes
to tailor performance to the conditions you experience in the field.
Model features are identified below.
Operation
User Manual
RX-FullDraw 3 Features at a Glance
• Laser Radiation: FDA Class 1 / IEC Class 3R
• Measurement Range:
6 yds – 1300 yds
• Measuring Time: Less than 1 second
• Auto Power Off after 5 seconds
(45 seconds if Trophy Scale is
enabled)
• Power: 3V Lithium CR2 battery
• Battery Life: At least 5,000 actuations
• Accuracy: +/- .5 yard/meter to 125 yards/
meters
• The RX-FullDraw 3 is waterproof
How the RX-FullDraw 3 Works
The RX-FullDraw 3 is a top-quality 6x23mm monocular that
incorporates the additional benefit of a state-of-the-art laser
rangefinder capable of measuring the distance of a deer-sized animal
from 6 yards to 900 yards, a tree from 6 yards to 1100 yards, and a
reflective target from 6 yards to 1300 yards. The rangefinder emits
a series of invisible, infrared energy pulses that are reflected off the
selected target back to the optical unit. State-of-the-art circuitry and
precision computing circuits are used to calculate the distance by
measuring the time it takes for each pulse to travel from the RX-
FullDraw 3 to the object and back.
Safety Precautions
The Leupold RX-FullDraw 3 6x23mm rangefinder employs
an eye-safe FDA Class 1 and IEC Class 3R laser in its
operation. Even so, there are a few precautions that are
important to remember:
RX-FullDraw™3
Digital Archery Rangefinder
Introduction
Congratulations! You have purchased a Leupold RX-FullDraw 3 digital
archery rangefinder that has been designed by Leupold’s engineers
and designers to be the best archery rangefinder in its category, and
to provide you with years of solid performance in the field. Following
are detailed instructions regarding the proper use and employment
of your RX rangefinder. To ensure top performance for the life of the
product, please read these instructions before operating your RX-
FullDraw 3 rangefinder.
Your new Leupold RX rangefinder is a, rangefinding device that
incorporates advanced digital electronics. The Digitally eNhanced
Accuracy (DNA) engine incorporates additional signal processing
techniques to generate better ranging distance with more accurate
rangefinding. The RX-FullDraw 3 features include an ergonomic,
waterproof body design.
Measuring Distance with the RX-FullDraw 3
Measurement of distance with the RX-FullDraw 3 is a very simple
operation:
• View the object of interest through the monocular
• Depress the POWER button to power up the unit
• Align the reticle over the object being viewed
• Depress the POWER button again – this will cause the laser
to activate
• Read the distance as shown in the image field
Continuous Measurement of a Moving Target/ Scan
Mode:
• Follow the instructions for “Measuring distance…” as explained
previously
• Once the target has been measured, continue to hold down the
POWER button and follow the object as it moves
• The distance will automatically update as long as the POWER
button is continuously depressed
• This procedure can also be used to obtain the range of multiple
animals or objects; simply move the reticle from one target to
another while holding down the POWER button
Clearing the Last Distance Obtained:
The last range reading does not need to be cleared before reading
another object’s distance. Simply aim at the new object using the
reticle, depress the POWER button and hold until the new range
reading is displayed.
Following is a reference table listing the ranges of the RX-FullDraw 3
model under different conditions:
• When you see the display through the eyepiece, please be aware
that the product is active and emitting an
invisible laser and the laser aperture should
not be pointed toward anyone
• The unit will produce an audible click
when activated to notify the user that the
rangefinder is emitting an invisible laser
• Do not depress the POWER button while
aiming at a human eye or while looking into the optics from the
objective side
• Do not leave the rangefinder within the reach of small children
• Do not take the product apart as it has a self-protection device in
the electronic control module and may cause an electric shock
• Do not attempt to use any power source other than a 3V Lithium
CR2 battery — the RX-FullDraw 3 rangefinder is designed to
prohibit accessing any other external power supply
• Read this instruction manual in its entirety before using this
rangefinder. If the product is used in a manner not specified by
the manufacturer, the protection provided by the equipment may
be impaired
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous laser radiation exposure
POWER
FOCUS
MODE
BATTERY
MAXIMUM RANGE
CONDITION RX-FullDraw 3
Reflective Target (yd/m)
1300/1189
Trees (yd/m)
1100/1006
Deer (yd/m)
900/823
RX-FullDraw
Magnification
6×
TBR (BOW Mode to 175 Yards)
Yes
Trophy Scale
Yes
Yards / Meters Mode
Yes
Last Target Mode
Yes
Scan Mode
Yes
Battery Life >5,000 Actuations
Weight
7.0 oz
Dimensions (Inches) 4.2 x 3.0 x 1.6
Battery Status Indicator
Yes
Warranty
2 Years
Waterproof
Yes
Accuracy +/- .5 Yard @ <125 yds.
Yes
in
cm
M
Y
L
O
S
B
O
W
R
F
L
L
A
S
T
T
G
T
*Display shown with all possible characters visible
Y
B
O
W
Battery Power Status Indicator
To determine your battery’s power level, look for the following
indicators:
FULL – A full battery bar indicates your battery is at or
near peak capacity.
HALF – A half-full bar indicates your battery has reached
half-capacity.
LOW – If the battery bar is empty, yet there is still data
displayed above the bar, the battery is nearing the end of its
life and should be replaced.
NO POWER – If the battery bar is empty, and there is no
data displayed above the bar, your battery is dead and you
must replace it. The battery status bar will flash and the unit
will shut down when no power remains.
Digitally eNhanced Accuracy
CLASS 3R LASER PRODUCT INVISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
This product complies with IEC
60825-1: 2014-05 Ed. 3.0 and complies with FDA performance standards
for laser products except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
P
o
:<5.14mW. λ:895-915nm. t
W
:20-60ns.
LEUPOLD & STEVENS, Inc,
14400 NW Greenbrier Parkway, Beaverton, OR 97006

Surface texture, color, size, and shape of the target all affect
reflectivity, which in turn affects the maximum range of the
instrument. As a rule of thumb, brightly colored targets are much
more reflective than darker targets. Tan game coats are more
reflective (and thus provide a more solid reading) than a black roof.
A shiny surface is more reflective than a dull surface. Smaller targets
are more difficult to range than larger targets. Light conditions, haze,
fog, rain, and other environmental conditions can all affect ranging
performance. Any factor which degrades air clarity will reduce the
maximum effective range. The sun generates infrared energy that
can degrade ranging performance in bright conditions or when
ranging towards the sun.
RX-FullDraw 3 Specifications
The RX-FullDraw 3 digital laser rangefinder provides useful modes
to tailor performance to the conditions you experience in the field.
Model features are identified below.
Operation
User Manual
RX-FullDraw 3 Features at a Glance
• Laser Radiation: FDA Class 1 / IEC Class 3R
• Measurement Range:
6 yds – 1300 yds
• Measuring Time: Less than 1 second
• Auto Power Off after 5 seconds
(45 seconds if Trophy Scale is
enabled)
• Power: 3V Lithium CR2 battery
• Battery Life: At least 5,000 actuations
• Accuracy: +/- .5 yard/meter to 125 yards/
meters
• The RX-FullDraw 3 is waterproof
How the RX-FullDraw 3 Works
The RX-FullDraw 3 is a top-quality 6x23mm monocular that
incorporates the additional benefit of a state-of-the-art laser
rangefinder capable of measuring the distance of a deer-sized animal
from 6 yards to 900 yards, a tree from 6 yards to 1100 yards, and a
reflective target from 6 yards to 1300 yards. The rangefinder emits
a series of invisible, infrared energy pulses that are reflected off the
selected target back to the optical unit. State-of-the-art circuitry and
precision computing circuits are used to calculate the distance by
measuring the time it takes for each pulse to travel from the RX-
FullDraw 3 to the object and back.
Safety Precautions
The Leupold RX-FullDraw 3 6x23mm rangefinder employs
an eye-safe FDA Class 1 and IEC Class 3R laser in its
operation. Even so, there are a few precautions that are
important to remember:
RX-FullDraw™3
Digital Archery Rangefinder
Introduction
Congratulations! You have purchased a Leupold RX-FullDraw 3 digital
archery rangefinder that has been designed by Leupold’s engineers
and designers to be the best archery rangefinder in its category, and
to provide you with years of solid performance in the field. Following
are detailed instructions regarding the proper use and employment
of your RX rangefinder. To ensure top performance for the life of the
product, please read these instructions before operating your RX-
FullDraw 3 rangefinder.
Your new Leupold RX rangefinder is a, rangefinding device that
incorporates advanced digital electronics. The Digitally eNhanced
Accuracy (DNA) engine incorporates additional signal processing
techniques to generate better ranging distance with more accurate
rangefinding. The RX-FullDraw 3 features include an ergonomic,
waterproof body design.
Measuring Distance with the RX-FullDraw 3
Measurement of distance with the RX-FullDraw 3 is a very simple
operation:
• View the object of interest through the monocular
• Depress the POWER button to power up the unit
• Align the reticle over the object being viewed
• Depress the POWER button again – this will cause the laser
to activate
• Read the distance as shown in the image field
Continuous Measurement of a Moving Target/ Scan
Mode:
• Follow the instructions for “Measuring distance…” as explained
previously
• Once the target has been measured, continue to hold down the
POWER button and follow the object as it moves
• The distance will automatically update as long as the POWER
button is continuously depressed
• This procedure can also be used to obtain the range of multiple
animals or objects; simply move the reticle from one target to
another while holding down the POWER button
Clearing the Last Distance Obtained:
The last range reading does not need to be cleared before reading
another object’s distance. Simply aim at the new object using the
reticle, depress the POWER button and hold until the new range
reading is displayed.
Following is a reference table listing the ranges of the RX-FullDraw 3
model under different conditions:
• When you see the display through the eyepiece, please be aware
that the product is active and emitting an
invisible laser and the laser aperture should
not be pointed toward anyone
• The unit will produce an audible click
when activated to notify the user that the
rangefinder is emitting an invisible laser
• Do not depress the POWER button while
aiming at a human eye or while looking into the optics from the
objective side
• Do not leave the rangefinder within the reach of small children
• Do not take the product apart as it has a self-protection device in
the electronic control module and may cause an electric shock
• Do not attempt to use any power source other than a 3V Lithium
CR2 battery — the RX-FullDraw 3 rangefinder is designed to
prohibit accessing any other external power supply
• Read this instruction manual in its entirety before using this
rangefinder. If the product is used in a manner not specified by
the manufacturer, the protection provided by the equipment may
be impaired
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous laser radiation exposure
POWER
FOCUS
MODE
BATTERY
MAXIMUM RANGE
CONDITION RX-FullDraw 3
Reflective Target (yd/m)
1300/1189
Trees (yd/m)
1100/1006
Deer (yd/m)
900/823
RX-FullDraw
Magnification
6×
TBR (BOW Mode to 175 Yards)
Yes
Trophy Scale
Yes
Yards / Meters Mode
Yes
Last Target Mode
Yes
Scan Mode
Yes
Battery Life >5,000 Actuations
Weight
7.0 oz
Dimensions (Inches) 4.2 x 3.0 x 1.6
Battery Status Indicator
Yes
Warranty
2 Years
Waterproof
Yes
Accuracy +/- .5 Yard @ <125 yds.
Yes
in
cm
M
Y
L
O
S
B
O
W
R
F
L
L
A
S
T
T
G
T
*Display shown with all possible characters visible
Y
B
O
W
Battery Power Status Indicator
To determine your battery’s power level, look for the following
indicators:
FULL – A full battery bar indicates your battery is at or
near peak capacity.
HALF – A half-full bar indicates your battery has reached
half-capacity.
LOW – If the battery bar is empty, yet there is still data
displayed above the bar, the battery is nearing the end of its
life and should be replaced.
NO POWER – If the battery bar is empty, and there is no
data displayed above the bar, your battery is dead and you
must replace it. The battery status bar will flash and the unit
will shut down when no power remains.
Digitally eNhanced Accuracy
CLASS 3R LASER PRODUCT INVISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
This product complies with IEC
60825-1: 2014-05 Ed. 3.0 and complies with FDA performance standards
for laser products except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
P
o
:<5.14mW. λ:895-915nm. t
W
:20-60ns.
LEUPOLD & STEVENS, Inc,
14400 NW Greenbrier Parkway, Beaverton, OR 97006

Surface texture, color, size, and shape of the target all affect
reflectivity, which in turn affects the maximum range of the
instrument. As a rule of thumb, brightly colored targets are much
more reflective than darker targets. Tan game coats are more
reflective (and thus provide a more solid reading) than a black roof.
A shiny surface is more reflective than a dull surface. Smaller targets
are more difficult to range than larger targets. Light conditions, haze,
fog, rain, and other environmental conditions can all affect ranging
performance. Any factor which degrades air clarity will reduce the
maximum effective range. The sun generates infrared energy that
can degrade ranging performance in bright conditions or when
ranging towards the sun.
RX-FullDraw 3 Specifications
The RX-FullDraw 3 digital laser rangefinder provides useful modes
to tailor performance to the conditions you experience in the field.
Model features are identified below.
Operation
User Manual
RX-FullDraw 3 Features at a Glance
• Laser Radiation: FDA Class 1 / IEC Class 3R
• Measurement Range:
6 yds – 1300 yds
• Measuring Time: Less than 1 second
• Auto Power Off after 5 seconds
(45 seconds if Trophy Scale is
enabled)
• Power: 3V Lithium CR2 battery
• Battery Life: At least 5,000 actuations
• Accuracy: +/- .5 yard/meter to 125 yards/
meters
• The RX-FullDraw 3 is waterproof
How the RX-FullDraw 3 Works
The RX-FullDraw 3 is a top-quality 6x23mm monocular that
incorporates the additional benefit of a state-of-the-art laser
rangefinder capable of measuring the distance of a deer-sized animal
from 6 yards to 900 yards, a tree from 6 yards to 1100 yards, and a
reflective target from 6 yards to 1300 yards. The rangefinder emits
a series of invisible, infrared energy pulses that are reflected off the
selected target back to the optical unit. State-of-the-art circuitry and
precision computing circuits are used to calculate the distance by
measuring the time it takes for each pulse to travel from the RX-
FullDraw 3 to the object and back.
Safety Precautions
The Leupold RX-FullDraw 3 6x23mm rangefinder employs
an eye-safe FDA Class 1 and IEC Class 3R laser in its
operation. Even so, there are a few precautions that are
important to remember:
RX-FullDraw™3
Digital Archery Rangefinder
Introduction
Congratulations! You have purchased a Leupold RX-FullDraw 3 digital
archery rangefinder that has been designed by Leupold’s engineers
and designers to be the best archery rangefinder in its category, and
to provide you with years of solid performance in the field. Following
are detailed instructions regarding the proper use and employment
of your RX rangefinder. To ensure top performance for the life of the
product, please read these instructions before operating your RX-
FullDraw 3 rangefinder.
Your new Leupold RX rangefinder is a, rangefinding device that
incorporates advanced digital electronics. The Digitally eNhanced
Accuracy (DNA) engine incorporates additional signal processing
techniques to generate better ranging distance with more accurate
rangefinding. The RX-FullDraw 3 features include an ergonomic,
waterproof body design.
Measuring Distance with the RX-FullDraw 3
Measurement of distance with the RX-FullDraw 3 is a very simple
operation:
• View the object of interest through the monocular
• Depress the POWER button to power up the unit
• Align the reticle over the object being viewed
• Depress the POWER button again – this will cause the laser
to activate
• Read the distance as shown in the image field
Continuous Measurement of a Moving Target/ Scan
Mode:
• Follow the instructions for “Measuring distance…” as explained
previously
• Once the target has been measured, continue to hold down the
POWER button and follow the object as it moves
• The distance will automatically update as long as the POWER
button is continuously depressed
• This procedure can also be used to obtain the range of multiple
animals or objects; simply move the reticle from one target to
another while holding down the POWER button
Clearing the Last Distance Obtained:
The last range reading does not need to be cleared before reading
another object’s distance. Simply aim at the new object using the
reticle, depress the POWER button and hold until the new range
reading is displayed.
Following is a reference table listing the ranges of the RX-FullDraw 3
model under different conditions:
• When you see the display through the eyepiece, please be aware
that the product is active and emitting an
invisible laser and the laser aperture should
not be pointed toward anyone
• The unit will produce an audible click
when activated to notify the user that the
rangefinder is emitting an invisible laser
• Do not depress the POWER button while
aiming at a human eye or while looking into the optics from the
objective side
• Do not leave the rangefinder within the reach of small children
• Do not take the product apart as it has a self-protection device in
the electronic control module and may cause an electric shock
• Do not attempt to use any power source other than a 3V Lithium
CR2 battery — the RX-FullDraw 3 rangefinder is designed to
prohibit accessing any other external power supply
• Read this instruction manual in its entirety before using this
rangefinder. If the product is used in a manner not specified by
the manufacturer, the protection provided by the equipment may
be impaired
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous laser radiation exposure
POWER
FOCUS
MODE
BATTERY
MAXIMUM RANGE
CONDITION RX-FullDraw 3
Reflective Target (yd/m)
1300/1189
Trees (yd/m)
1100/1006
Deer (yd/m)
900/823
RX-FullDraw
Magnification
6×
TBR (BOW Mode to 175 Yards)
Yes
Trophy Scale
Yes
Yards / Meters Mode
Yes
Last Target Mode
Yes
Scan Mode
Yes
Battery Life >5,000 Actuations
Weight
7.0 oz
Dimensions (Inches) 4.2 x 3.0 x 1.6
Battery Status Indicator
Yes
Warranty
2 Years
Waterproof
Yes
Accuracy +/- .5 Yard @ <125 yds.
Yes
in
cm
M
Y
L
O
S
B
O
W
R
F
L
L
A
S
T
T
G
T
*Display shown with all possible characters visible
Y
B
O
W
Battery Power Status Indicator
To determine your battery’s power level, look for the following
indicators:
FULL – A full battery bar indicates your battery is at or
near peak capacity.
HALF – A half-full bar indicates your battery has reached
half-capacity.
LOW – If the battery bar is empty, yet there is still data
displayed above the bar, the battery is nearing the end of its
life and should be replaced.
NO POWER – If the battery bar is empty, and there is no
data displayed above the bar, your battery is dead and you
must replace it. The battery status bar will flash and the unit
will shut down when no power remains.
Digitally eNhanced Accuracy
CLASS 3R LASER PRODUCT INVISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
This product complies with IEC
60825-1: 2014-05 Ed. 3.0 and complies with FDA performance standards
for laser products except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
P
o
:<5.14mW. λ:895-915nm. t
W
:20-60ns.
LEUPOLD & STEVENS, Inc,
14400 NW Greenbrier Parkway, Beaverton, OR 97006

Surface texture, color, size, and shape of the target all affect
reflectivity, which in turn affects the maximum range of the
instrument. As a rule of thumb, brightly colored targets are much
more reflective than darker targets. Tan game coats are more
reflective (and thus provide a more solid reading) than a black roof.
A shiny surface is more reflective than a dull surface. Smaller targets
are more difficult to range than larger targets. Light conditions, haze,
fog, rain, and other environmental conditions can all affect ranging
performance. Any factor which degrades air clarity will reduce the
maximum effective range. The sun generates infrared energy that
can degrade ranging performance in bright conditions or when
ranging towards the sun.
RX-FullDraw 3 Specifications
The RX-FullDraw 3 digital laser rangefinder provides useful modes
to tailor performance to the conditions you experience in the field.
Model features are identified below.
Operation
User Manual
RX-FullDraw 3 Features at a Glance
• Laser Radiation: FDA Class 1 / IEC Class 3R
• Measurement Range:
6 yds – 1300 yds
• Measuring Time: Less than 1 second
• Auto Power Off after 5 seconds
(45 seconds if Trophy Scale is
enabled)
• Power: 3V Lithium CR2 battery
• Battery Life: At least 5,000 actuations
• Accuracy: +/- .5 yard/meter to 125 yards/
meters
• The RX-FullDraw 3 is waterproof
How the RX-FullDraw 3 Works
The RX-FullDraw 3 is a top-quality 6x23mm monocular that
incorporates the additional benefit of a state-of-the-art laser
rangefinder capable of measuring the distance of a deer-sized animal
from 6 yards to 900 yards, a tree from 6 yards to 1100 yards, and a
reflective target from 6 yards to 1300 yards. The rangefinder emits
a series of invisible, infrared energy pulses that are reflected off the
selected target back to the optical unit. State-of-the-art circuitry and
precision computing circuits are used to calculate the distance by
measuring the time it takes for each pulse to travel from the RX-
FullDraw 3 to the object and back.
Safety Precautions
The Leupold RX-FullDraw 3 6x23mm rangefinder employs
an eye-safe FDA Class 1 and IEC Class 3R laser in its
operation. Even so, there are a few precautions that are
important to remember:
RX-FullDraw™3
Digital Archery Rangefinder
Introduction
Congratulations! You have purchased a Leupold RX-FullDraw 3 digital
archery rangefinder that has been designed by Leupold’s engineers
and designers to be the best archery rangefinder in its category, and
to provide you with years of solid performance in the field. Following
are detailed instructions regarding the proper use and employment
of your RX rangefinder. To ensure top performance for the life of the
product, please read these instructions before operating your RX-
FullDraw 3 rangefinder.
Your new Leupold RX rangefinder is a, rangefinding device that
incorporates advanced digital electronics. The Digitally eNhanced
Accuracy (DNA) engine incorporates additional signal processing
techniques to generate better ranging distance with more accurate
rangefinding. The RX-FullDraw 3 features include an ergonomic,
waterproof body design.
Measuring Distance with the RX-FullDraw 3
Measurement of distance with the RX-FullDraw 3 is a very simple
operation:
• View the object of interest through the monocular
• Depress the POWER button to power up the unit
• Align the reticle over the object being viewed
• Depress the POWER button again – this will cause the laser
to activate
• Read the distance as shown in the image field
Continuous Measurement of a Moving Target/ Scan
Mode:
• Follow the instructions for “Measuring distance…” as explained
previously
• Once the target has been measured, continue to hold down the
POWER button and follow the object as it moves
• The distance will automatically update as long as the POWER
button is continuously depressed
• This procedure can also be used to obtain the range of multiple
animals or objects; simply move the reticle from one target to
another while holding down the POWER button
Clearing the Last Distance Obtained:
The last range reading does not need to be cleared before reading
another object’s distance. Simply aim at the new object using the
reticle, depress the POWER button and hold until the new range
reading is displayed.
Following is a reference table listing the ranges of the RX-FullDraw 3
model under different conditions:
• When you see the display through the eyepiece, please be aware
that the product is active and emitting an
invisible laser and the laser aperture should
not be pointed toward anyone
• The unit will produce an audible click
when activated to notify the user that the
rangefinder is emitting an invisible laser
• Do not depress the POWER button while
aiming at a human eye or while looking into the optics from the
objective side
• Do not leave the rangefinder within the reach of small children
• Do not take the product apart as it has a self-protection device in
the electronic control module and may cause an electric shock
• Do not attempt to use any power source other than a 3V Lithium
CR2 battery — the RX-FullDraw 3 rangefinder is designed to
prohibit accessing any other external power supply
• Read this instruction manual in its entirety before using this
rangefinder. If the product is used in a manner not specified by
the manufacturer, the protection provided by the equipment may
be impaired
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous laser radiation exposure
POWER
FOCUS
MODE
BATTERY
MAXIMUM RANGE
CONDITION RX-FullDraw 3
Reflective Target (yd/m)
1300/1189
Trees (yd/m)
1100/1006
Deer (yd/m)
900/823
RX-FullDraw
Magnification
6×
TBR (BOW Mode to 175 Yards)
Yes
Trophy Scale
Yes
Yards / Meters Mode
Yes
Last Target Mode
Yes
Scan Mode
Yes
Battery Life >5,000 Actuations
Weight
7.0 oz
Dimensions (Inches) 4.2 x 3.0 x 1.6
Battery Status Indicator
Yes
Warranty
2 Years
Waterproof
Yes
Accuracy +/- .5 Yard @ <125 yds.
Yes
in
cm
M
Y
L
O
S
B
O
W
R
F
L
L
A
S
T
T
G
T
*Display shown with all possible characters visible
Y
B
O
W
Battery Power Status Indicator
To determine your battery’s power level, look for the following
indicators:
FULL – A full battery bar indicates your battery is at or
near peak capacity.
HALF – A half-full bar indicates your battery has reached
half-capacity.
LOW – If the battery bar is empty, yet there is still data
displayed above the bar, the battery is nearing the end of its
life and should be replaced.
NO POWER – If the battery bar is empty, and there is no
data displayed above the bar, your battery is dead and you
must replace it. The battery status bar will flash and the unit
will shut down when no power remains.
Digitally eNhanced Accuracy
CLASS 3R LASER PRODUCT INVISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
This product complies with IEC
60825-1: 2014-05 Ed. 3.0 and complies with FDA performance standards
for laser products except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
P
o
:<5.14mW. λ:895-915nm. t
W
:20-60ns.
LEUPOLD & STEVENS, Inc,
14400 NW Greenbrier Parkway, Beaverton, OR 97006

Surface texture, color, size, and shape of the target all affect
reflectivity, which in turn affects the maximum range of the
instrument. As a rule of thumb, brightly colored targets are much
more reflective than darker targets. Tan game coats are more
reflective (and thus provide a more solid reading) than a black roof.
A shiny surface is more reflective than a dull surface. Smaller targets
are more difficult to range than larger targets. Light conditions, haze,
fog, rain, and other environmental conditions can all affect ranging
performance. Any factor which degrades air clarity will reduce the
maximum effective range. The sun generates infrared energy that
can degrade ranging performance in bright conditions or when
ranging towards the sun.
RX-FullDraw 3 Specifications
The RX-FullDraw 3 digital laser rangefinder provides useful modes
to tailor performance to the conditions you experience in the field.
Model features are identified below.
Operation
User Manual
RX-FullDraw 3 Features at a Glance
• Laser Radiation: FDA Class 1 / IEC Class 3R
• Measurement Range:
6 yds – 1300 yds
• Measuring Time: Less than 1 second
• Auto Power Off after 5 seconds
(45 seconds if Trophy Scale is
enabled)
• Power: 3V Lithium CR2 battery
• Battery Life: At least 5,000 actuations
• Accuracy: +/- .5 yard/meter to 125 yards/
meters
• The RX-FullDraw 3 is waterproof
How the RX-FullDraw 3 Works
The RX-FullDraw 3 is a top-quality 6x23mm monocular that
incorporates the additional benefit of a state-of-the-art laser
rangefinder capable of measuring the distance of a deer-sized animal
from 6 yards to 900 yards, a tree from 6 yards to 1100 yards, and a
reflective target from 6 yards to 1300 yards. The rangefinder emits
a series of invisible, infrared energy pulses that are reflected off the
selected target back to the optical unit. State-of-the-art circuitry and
precision computing circuits are used to calculate the distance by
measuring the time it takes for each pulse to travel from the RX-
FullDraw 3 to the object and back.
Safety Precautions
The Leupold RX-FullDraw 3 6x23mm rangefinder employs
an eye-safe FDA Class 1 and IEC Class 3R laser in its
operation. Even so, there are a few precautions that are
important to remember:
RX-FullDraw™3
Digital Archery Rangefinder
Introduction
Congratulations! You have purchased a Leupold RX-FullDraw 3 digital
archery rangefinder that has been designed by Leupold’s engineers
and designers to be the best archery rangefinder in its category, and
to provide you with years of solid performance in the field. Following
are detailed instructions regarding the proper use and employment
of your RX rangefinder. To ensure top performance for the life of the
product, please read these instructions before operating your RX-
FullDraw 3 rangefinder.
Your new Leupold RX rangefinder is a, rangefinding device that
incorporates advanced digital electronics. The Digitally eNhanced
Accuracy (DNA) engine incorporates additional signal processing
techniques to generate better ranging distance with more accurate
rangefinding. The RX-FullDraw 3 features include an ergonomic,
waterproof body design.
Measuring Distance with the RX-FullDraw 3
Measurement of distance with the RX-FullDraw 3 is a very simple
operation:
• View the object of interest through the monocular
• Depress the POWER button to power up the unit
• Align the reticle over the object being viewed
• Depress the POWER button again – this will cause the laser
to activate
• Read the distance as shown in the image field
Continuous Measurement of a Moving Target/ Scan
Mode:
• Follow the instructions for “Measuring distance…” as explained
previously
• Once the target has been measured, continue to hold down the
POWER button and follow the object as it moves
• The distance will automatically update as long as the POWER
button is continuously depressed
• This procedure can also be used to obtain the range of multiple
animals or objects; simply move the reticle from one target to
another while holding down the POWER button
Clearing the Last Distance Obtained:
The last range reading does not need to be cleared before reading
another object’s distance. Simply aim at the new object using the
reticle, depress the POWER button and hold until the new range
reading is displayed.
Following is a reference table listing the ranges of the RX-FullDraw 3
model under different conditions:
• When you see the display through the eyepiece, please be aware
that the product is active and emitting an
invisible laser and the laser aperture should
not be pointed toward anyone
• The unit will produce an audible click
when activated to notify the user that the
rangefinder is emitting an invisible laser
• Do not depress the POWER button while
aiming at a human eye or while looking into the optics from the
objective side
• Do not leave the rangefinder within the reach of small children
• Do not take the product apart as it has a self-protection device in
the electronic control module and may cause an electric shock
• Do not attempt to use any power source other than a 3V Lithium
CR2 battery — the RX-FullDraw 3 rangefinder is designed to
prohibit accessing any other external power supply
• Read this instruction manual in its entirety before using this
rangefinder. If the product is used in a manner not specified by
the manufacturer, the protection provided by the equipment may
be impaired
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous laser radiation exposure
POWER
FOCUS
MODE
BATTERY
MAXIMUM RANGE
CONDITION RX-FullDraw 3
Reflective Target (yd/m)
1300/1189
Trees (yd/m)
1100/1006
Deer (yd/m)
900/823
RX-FullDraw
Magnification
6×
TBR (BOW Mode to 175 Yards)
Yes
Trophy Scale
Yes
Yards / Meters Mode
Yes
Last Target Mode
Yes
Scan Mode
Yes
Battery Life >5,000 Actuations
Weight
7.0 oz
Dimensions (Inches) 4.2 x 3.0 x 1.6
Battery Status Indicator
Yes
Warranty
2 Years
Waterproof
Yes
Accuracy +/- .5 Yard @ <125 yds.
Yes
in
cm
M
Y
L
O
S
B
O
W
R
F
L
L
A
S
T
T
G
T
*Display shown with all possible characters visible
Y
B
O
W
Battery Power Status Indicator
To determine your battery’s power level, look for the following
indicators:
FULL – A full battery bar indicates your battery is at or
near peak capacity.
HALF – A half-full bar indicates your battery has reached
half-capacity.
LOW – If the battery bar is empty, yet there is still data
displayed above the bar, the battery is nearing the end of its
life and should be replaced.
NO POWER – If the battery bar is empty, and there is no
data displayed above the bar, your battery is dead and you
must replace it. The battery status bar will flash and the unit
will shut down when no power remains.
Digitally eNhanced Accuracy
CLASS 3R LASER PRODUCT INVISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
This product complies with IEC
60825-1: 2014-05 Ed. 3.0 and complies with FDA performance standards
for laser products except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
P
o
:<5.14mW. λ:895-915nm. t
W
:20-60ns.
LEUPOLD & STEVENS, Inc,
14400 NW Greenbrier Parkway, Beaverton, OR 97006

Leupold & Stevens, Inc.
PO Box 688 Beaverton, Oregon 97075-0688
www.leupold.com
1-800-LEUPOLD (538-7653)
Part #174736 Artwork #174751B
BOW Mode
Your RX-FullDraw 3 always operates in BOW
mode utilizing Leupold’s legendary True Ballistic
Range (TBR) to provide the equivalent horizontal
range (level fire range) for arrows. TBR is a
marriage of laser ranging, an inclinometer, and an
advanced computerized ballistics program. The result is distance
measurements accurate within a yard, no matter the angle at which
the laser is fired. Arrows travel in a ballistic arc, yet conventional
rangefinders only provide a linear distance to your target. TBR
delivers the ballistic equivalent range to the target, accounting for
the effects of inclines or declines on the path of your arrow. The
displayed range represents the ballistically equivalent horizontal
distance to the target if the target is 175 yards or less. If the target
is farther than 175 yards (160 meters), the LOS icon will flash while
BOW remains displayed, and the resulting distance will be the Line Of
Sight distance only.
Most importantly, using your RX-FullDraw 3 effectively means to
Practice, Practice, Practice. Anytime you handle a bow or firearm,
you are ultimately responsible for your projectile.
Quick Set Menu
When you initially push the Power button, the unit is ready for ranging.
To enter the Quick Set Menu, press and hold the MODE button for at
least 1 second.
To manipulate a function, press and release the MODE button until
that function is displayed, then use the POWER button to change the
setting. If this is the last function to be changed, you can allow the
rangefinder to sit idle for 30 seconds which will cause an automatic
power-off, saving all selections. If additional functions require
manipulation, simply press and release MODE to continue through
the Quick Set Menu. Pressing and holding MODE for 1 second at
any time will save all changes, exit the Quick Set Menu, and prepare
the rangefinder for immediate use.
Note: Activating certain modes automatically disables other modes.
For example activating the yards mode will automatically deactivate
the meters mode.
Unit Output
This mode is used to choose between yards and meters
as the preferred unit of measure.
To choose between yards and meters, navigate
through the Quick Set Menu by pressing the
MODE button until “Unit” is shown in the upper
display. Press and release the POWER button to
alternate between yards and meters.
M
Y
Familiar reticle to shooters from riflescopes; draws eye to the center, easy to see, does
not cover the target in the center where aiming is most critical.
Reticle
with Plus Point™
Plus PointTM: Ideal for varmints and other small
targets. Small open center avoids coverage of very
small or distant targets.
Plus Point™
Reticle
without Plus Point™
Cleaning/Maintenance
Blow away dust or debris on lenses, or use a soft lens brush (such
as the one found on the Leupold LensPen). To remove fingerprints,
water spots or tougher dirt, use a soft cotton cloth or the cleaning end
of the Leupold LensPen. A lens tissue with lens cleaning fluid may
be used for more stubborn dirt. Always apply cleaning fluid to the
cleaning cloth, never directly to the lens.
To insert a new battery, remove battery cover (shown in diagram) and
remove exhausted battery. Insert new CR-2 battery, negative terminal
first, into the battery compartment. Close battery cover.
To focus the digital laser rangefinder, turn the eyepiece left or right
(you will feel and hear the clicking of the diopter, indicating a change
to the focus has been made) until crisp focus is achieved.
RX-FullDraw 3 is waterproof.
The RX-FullDraw 3 includes a lanyard and is equipped with a lanyard
attachment for added security in the field.
Helpful Hints for Using the RX FullDraw 3
Rangefinder does not provide range.
• Make sure that the POWER button is being depressed (as
opposed to MODE button)
• Make sure that nothing, such as your hand or finger, is
blocking the lenses — as this could interfere with the
emission and reception of the laser pulses
• Make sure unit is held steadily while depressing the
POWER button
• Make sure the target is at least 6 yards away
• Target may be beyond maximum distance
BY PARCEL SERVICE:
Leupold Product Service
14400 NW Greenbrier Parkway
Beaverton, OR 97006-5791
USA
BY POSTAL SERVICE:
Leupold Product Service
P.O. Box 688
Beaverton, OR 97075-0688
USA
For product questions, consult the Leupold Web site at:
leupold.com or call (800) LEUPOLD (538-7653).
Register your product at: Leupold.com/account/login
LEUPOLD, GOLDEN RING, MARK 4, the Golden Ring design, the circle-L reticle logo
design, and various other marks are registered trademarks of Leupold & Stevens,
Inc. All marks, including corporate logos and emblems, are subject to Leupold’s
rights and may not be used in connection with any product or service that is not
Leupold’s, or in any manner that disparages or discredits Leupold, or in a manner
likely to cause confusion.
Certain other trademarks used in connection with Leupold products and services
are the property of their respective owners, and are used with permission. BOONE
AND CROCKETT CLUB and BOONE AND CROCKETT are registered trademarks of
the Boone and Crockett Club. RMEF and ROCKY MOUNTAIN ELK FOUNDATION are
registered trademarks of the Rocky Mountain Elk Foundation. ADVANTAGE TIMBER
and ADVANTAGE TIMBER HD are trademarks or registered trademarks of Jordan
Outdoor Enterprises Ltd. MOSSY OAK BREAK-UP, MOSSY OAK BRUSH, MOSSY
OAK OBSESSION, and MOSSY OAK TREESTAND are trademarks or registered
trademarks of HAAS Outdoors, Inc. A.R.M.S. is a registered trademark of Atlantic
Research Marketing Systems, Inc.
We reserve the right to make design and/or material modifications without prior
notice.
Copyright © 2017 Leupold & Stevens, Inc. All rights reserved.
Trophy ScaleTM
The RX-FullDraw 3 lets you instantly and accurately judge the width
and/or height of a target using Trophy Scale. To be used properly, you
must enter the width/height measurement you would like to use as a
baseline. To set the Trophy Scale, enter the Quick
Set Menu and activate Trophy Scale. Once Trophy
Scale has been activated, press MODE to enter the
Trophy Scale value set-up. At this point, the Trophy
Scale value will be flashing; pressing POWER will
increase the Trophy Scale value two inches/5 cm,
at a time. The Trophy Scale value will begin at 10”/25 cm, for the
initial set-up, or the last saved value for subsequent changes, and will
progress up to 60”/150 cm. The next press of the POWER button
will reset the numbers to 10”/25 cm again. Press MODE or wait for
the power to “time out” to save the baseline measurement.
Once the baseline Trophy Scale value has been saved, the Trophy
Scale bracketing system will automatically adjust to changing
distances to the target, displaying a single mark on the left, and two
marks on the right. To use Trophy Scale, place the left edge of the
target on the left mark, the two marks on the right will represent
a range of widths; for example, the closest of the right marks may
represent a width of 21” and the farther mark may represent a width
of 29”. If the target brackets perfectly between the left mark and the
closer right mark, it measures 21”, if the target brackets perfectly
between the left mark and the farthest right mark, it measures
29”. If the target falls between the two right marks, it measures
approximately 25”. To measure height, the same marks are used,
but the RX-FullDraw 3 rangefinder must be held on its side. It is
important to note that distance may limit the sizes available as a
baseline measurement; small measurements may be limited at long
distances and large measurements may be limited at short distances.
Trophy Scale measurements are for reference only and may not be
exact.
Last Target Mode
This mode is used to display the distance to the
farthest object when more than one object may be
read. Multiple objects will often return an average
distance. Last Target Mode ensures an accurate
reading on the farthest object being ranged.
To activate Last Target mode, navigate through the
Quick Set Menu by pressing and releasing the MODE
button until the Last Target icon is shown in the left
portion of the display. Press and release the POWER
button to turn Last Target on/off.
3 Selectable Reticles
This mode allows you to choose any one of the 3 preloaded reticles
as the primary aiming point for the RX-FullDraw 3 digital laser
rangefinders. To select a reticle, press Mode repeatedly until the
in
Y
L
O
S
B
O
W
L
A
S
T
T
G
T
R
F
L
B
O
W
L
A
S
T
T
G
T
L
A
S
T
T
G
T
Warranty/Repair
The Leupold Electronics Warranty covers any defects in materials and
workmanship in the electronic components of RX, GX, and PinCaddie
Rangefinders, Vendetta Archery Rangefinders, Leupold Thermal
Optics, and other Leupold electronic products. This warranty lasts for
two-years from the date of purchase. For complete warranty details
visit leupold.com/leupold-core/leupold-dna/lifetime-guarantee.
In the event of a need for service or repair, please contact Leupold
Product Service at: leupold.com
in
Y
L
O
S
B
O
W
R
F
L
L
A
S
T
T
G
T
current reticle is blinking. Press POWER repeatedly to scroll through
the available reticles, then press MODE when the preferred reticle is
shown. The reticle choices are as follows:

Leupold & Stevens, Inc.
PO Box 688 Beaverton, Oregon 97075-0688
www.leupold.com
1-800-LEUPOLD (538-7653)
Part #174736 Artwork #174751B
BOW Mode
Your RX-FullDraw 3 always operates in BOW
mode utilizing Leupold’s legendary True Ballistic
Range (TBR) to provide the equivalent horizontal
range (level fire range) for arrows. TBR is a
marriage of laser ranging, an inclinometer, and an
advanced computerized ballistics program. The result is distance
measurements accurate within a yard, no matter the angle at which
the laser is fired. Arrows travel in a ballistic arc, yet conventional
rangefinders only provide a linear distance to your target. TBR
delivers the ballistic equivalent range to the target, accounting for
the effects of inclines or declines on the path of your arrow. The
displayed range represents the ballistically equivalent horizontal
distance to the target if the target is 175 yards or less. If the target
is farther than 175 yards (160 meters), the LOS icon will flash while
BOW remains displayed, and the resulting distance will be the Line Of
Sight distance only.
Most importantly, using your RX-FullDraw 3 effectively means to
Practice, Practice, Practice. Anytime you handle a bow or firearm,
you are ultimately responsible for your projectile.
Quick Set Menu
When you initially push the Power button, the unit is ready for ranging.
To enter the Quick Set Menu, press and hold the MODE button for at
least 1 second.
To manipulate a function, press and release the MODE button until
that function is displayed, then use the POWER button to change the
setting. If this is the last function to be changed, you can allow the
rangefinder to sit idle for 30 seconds which will cause an automatic
power-off, saving all selections. If additional functions require
manipulation, simply press and release MODE to continue through
the Quick Set Menu. Pressing and holding MODE for 1 second at
any time will save all changes, exit the Quick Set Menu, and prepare
the rangefinder for immediate use.
Note: Activating certain modes automatically disables other modes.
For example activating the yards mode will automatically deactivate
the meters mode.
Unit Output
This mode is used to choose between yards and meters
as the preferred unit of measure.
To choose between yards and meters, navigate
through the Quick Set Menu by pressing the
MODE button until “Unit” is shown in the upper
display. Press and release the POWER button to
alternate between yards and meters.
M
Y
Familiar reticle to shooters from riflescopes; draws eye to the center, easy to see, does
not cover the target in the center where aiming is most critical.
Reticle
with Plus Point™
Plus PointTM: Ideal for varmints and other small
targets. Small open center avoids coverage of very
small or distant targets.
Plus Point™
Reticle
without Plus Point™
Cleaning/Maintenance
Blow away dust or debris on lenses, or use a soft lens brush (such
as the one found on the Leupold LensPen). To remove fingerprints,
water spots or tougher dirt, use a soft cotton cloth or the cleaning end
of the Leupold LensPen. A lens tissue with lens cleaning fluid may
be used for more stubborn dirt. Always apply cleaning fluid to the
cleaning cloth, never directly to the lens.
To insert a new battery, remove battery cover (shown in diagram) and
remove exhausted battery. Insert new CR-2 battery, negative terminal
first, into the battery compartment. Close battery cover.
To focus the digital laser rangefinder, turn the eyepiece left or right
(you will feel and hear the clicking of the diopter, indicating a change
to the focus has been made) until crisp focus is achieved.
RX-FullDraw 3 is waterproof.
The RX-FullDraw 3 includes a lanyard and is equipped with a lanyard
attachment for added security in the field.
Helpful Hints for Using the RX FullDraw 3
Rangefinder does not provide range.
• Make sure that the POWER button is being depressed (as
opposed to MODE button)
• Make sure that nothing, such as your hand or finger, is
blocking the lenses — as this could interfere with the
emission and reception of the laser pulses
• Make sure unit is held steadily while depressing the
POWER button
• Make sure the target is at least 6 yards away
• Target may be beyond maximum distance
BY PARCEL SERVICE:
Leupold Product Service
14400 NW Greenbrier Parkway
Beaverton, OR 97006-5791
USA
BY POSTAL SERVICE:
Leupold Product Service
P.O. Box 688
Beaverton, OR 97075-0688
USA
For product questions, consult the Leupold Web site at:
leupold.com or call (800) LEUPOLD (538-7653).
Register your product at: Leupold.com/account/login
LEUPOLD, GOLDEN RING, MARK 4, the Golden Ring design, the circle-L reticle logo
design, and various other marks are registered trademarks of Leupold & Stevens,
Inc. All marks, including corporate logos and emblems, are subject to Leupold’s
rights and may not be used in connection with any product or service that is not
Leupold’s, or in any manner that disparages or discredits Leupold, or in a manner
likely to cause confusion.
Certain other trademarks used in connection with Leupold products and services
are the property of their respective owners, and are used with permission. BOONE
AND CROCKETT CLUB and BOONE AND CROCKETT are registered trademarks of
the Boone and Crockett Club. RMEF and ROCKY MOUNTAIN ELK FOUNDATION are
registered trademarks of the Rocky Mountain Elk Foundation. ADVANTAGE TIMBER
and ADVANTAGE TIMBER HD are trademarks or registered trademarks of Jordan
Outdoor Enterprises Ltd. MOSSY OAK BREAK-UP, MOSSY OAK BRUSH, MOSSY
OAK OBSESSION, and MOSSY OAK TREESTAND are trademarks or registered
trademarks of HAAS Outdoors, Inc. A.R.M.S. is a registered trademark of Atlantic
Research Marketing Systems, Inc.
We reserve the right to make design and/or material modifications without prior
notice.
Copyright © 2017 Leupold & Stevens, Inc. All rights reserved.
Trophy ScaleTM
The RX-FullDraw 3 lets you instantly and accurately judge the width
and/or height of a target using Trophy Scale. To be used properly, you
must enter the width/height measurement you would like to use as a
baseline. To set the Trophy Scale, enter the Quick
Set Menu and activate Trophy Scale. Once Trophy
Scale has been activated, press MODE to enter the
Trophy Scale value set-up. At this point, the Trophy
Scale value will be flashing; pressing POWER will
increase the Trophy Scale value two inches/5 cm,
at a time. The Trophy Scale value will begin at 10”/25 cm, for the
initial set-up, or the last saved value for subsequent changes, and will
progress up to 60”/150 cm. The next press of the POWER button
will reset the numbers to 10”/25 cm again. Press MODE or wait for
the power to “time out” to save the baseline measurement.
Once the baseline Trophy Scale value has been saved, the Trophy
Scale bracketing system will automatically adjust to changing
distances to the target, displaying a single mark on the left, and two
marks on the right. To use Trophy Scale, place the left edge of the
target on the left mark, the two marks on the right will represent
a range of widths; for example, the closest of the right marks may
represent a width of 21” and the farther mark may represent a width
of 29”. If the target brackets perfectly between the left mark and the
closer right mark, it measures 21”, if the target brackets perfectly
between the left mark and the farthest right mark, it measures
29”. If the target falls between the two right marks, it measures
approximately 25”. To measure height, the same marks are used,
but the RX-FullDraw 3 rangefinder must be held on its side. It is
important to note that distance may limit the sizes available as a
baseline measurement; small measurements may be limited at long
distances and large measurements may be limited at short distances.
Trophy Scale measurements are for reference only and may not be
exact.
Last Target Mode
This mode is used to display the distance to the
farthest object when more than one object may be
read. Multiple objects will often return an average
distance. Last Target Mode ensures an accurate
reading on the farthest object being ranged.
To activate Last Target mode, navigate through the
Quick Set Menu by pressing and releasing the MODE
button until the Last Target icon is shown in the left
portion of the display. Press and release the POWER
button to turn Last Target on/off.
3 Selectable Reticles
This mode allows you to choose any one of the 3 preloaded reticles
as the primary aiming point for the RX-FullDraw 3 digital laser
rangefinders. To select a reticle, press Mode repeatedly until the
in
Y
L
O
S
B
O
W
L
A
S
T
T
G
T
R
F
L
B
O
W
L
A
S
T
T
G
T
L
A
S
T
T
G
T
Warranty/Repair
The Leupold Electronics Warranty covers any defects in materials and
workmanship in the electronic components of RX, GX, and PinCaddie
Rangefinders, Vendetta Archery Rangefinders, Leupold Thermal
Optics, and other Leupold electronic products. This warranty lasts for
two-years from the date of purchase. For complete warranty details
visit leupold.com/leupold-core/leupold-dna/lifetime-guarantee.
In the event of a need for service or repair, please contact Leupold
Product Service at: leupold.com
in
Y
L
O
S
B
O
W
R
F
L
L
A
S
T
T
G
T
current reticle is blinking. Press POWER repeatedly to scroll through
the available reticles, then press MODE when the preferred reticle is
shown. The reticle choices are as follows:

Leupold & Stevens, Inc.
PO Box 688 Beaverton, Oregon 97075-0688
www.leupold.com
1-800-LEUPOLD (538-7653)
Part #174736 Artwork #174751B
BOW Mode
Your RX-FullDraw 3 always operates in BOW
mode utilizing Leupold’s legendary True Ballistic
Range (TBR) to provide the equivalent horizontal
range (level fire range) for arrows. TBR is a
marriage of laser ranging, an inclinometer, and an
advanced computerized ballistics program. The result is distance
measurements accurate within a yard, no matter the angle at which
the laser is fired. Arrows travel in a ballistic arc, yet conventional
rangefinders only provide a linear distance to your target. TBR
delivers the ballistic equivalent range to the target, accounting for
the effects of inclines or declines on the path of your arrow. The
displayed range represents the ballistically equivalent horizontal
distance to the target if the target is 175 yards or less. If the target
is farther than 175 yards (160 meters), the LOS icon will flash while
BOW remains displayed, and the resulting distance will be the Line Of
Sight distance only.
Most importantly, using your RX-FullDraw 3 effectively means to
Practice, Practice, Practice. Anytime you handle a bow or firearm,
you are ultimately responsible for your projectile.
Quick Set Menu
When you initially push the Power button, the unit is ready for ranging.
To enter the Quick Set Menu, press and hold the MODE button for at
least 1 second.
To manipulate a function, press and release the MODE button until
that function is displayed, then use the POWER button to change the
setting. If this is the last function to be changed, you can allow the
rangefinder to sit idle for 30 seconds which will cause an automatic
power-off, saving all selections. If additional functions require
manipulation, simply press and release MODE to continue through
the Quick Set Menu. Pressing and holding MODE for 1 second at
any time will save all changes, exit the Quick Set Menu, and prepare
the rangefinder for immediate use.
Note: Activating certain modes automatically disables other modes.
For example activating the yards mode will automatically deactivate
the meters mode.
Unit Output
This mode is used to choose between yards and meters
as the preferred unit of measure.
To choose between yards and meters, navigate
through the Quick Set Menu by pressing the
MODE button until “Unit” is shown in the upper
display. Press and release the POWER button to
alternate between yards and meters.
M
Y
Familiar reticle to shooters from riflescopes; draws eye to the center, easy to see, does
not cover the target in the center where aiming is most critical.
Reticle
with Plus Point™
Plus PointTM: Ideal for varmints and other small
targets. Small open center avoids coverage of very
small or distant targets.
Plus Point™
Reticle
without Plus Point™
Cleaning/Maintenance
Blow away dust or debris on lenses, or use a soft lens brush (such
as the one found on the Leupold LensPen). To remove fingerprints,
water spots or tougher dirt, use a soft cotton cloth or the cleaning end
of the Leupold LensPen. A lens tissue with lens cleaning fluid may
be used for more stubborn dirt. Always apply cleaning fluid to the
cleaning cloth, never directly to the lens.
To insert a new battery, remove battery cover (shown in diagram) and
remove exhausted battery. Insert new CR-2 battery, negative terminal
first, into the battery compartment. Close battery cover.
To focus the digital laser rangefinder, turn the eyepiece left or right
(you will feel and hear the clicking of the diopter, indicating a change
to the focus has been made) until crisp focus is achieved.
RX-FullDraw 3 is waterproof.
The RX-FullDraw 3 includes a lanyard and is equipped with a lanyard
attachment for added security in the field.
Helpful Hints for Using the RX FullDraw 3
Rangefinder does not provide range.
• Make sure that the POWER button is being depressed (as
opposed to MODE button)
• Make sure that nothing, such as your hand or finger, is
blocking the lenses — as this could interfere with the
emission and reception of the laser pulses
• Make sure unit is held steadily while depressing the
POWER button
• Make sure the target is at least 6 yards away
• Target may be beyond maximum distance
BY PARCEL SERVICE:
Leupold Product Service
14400 NW Greenbrier Parkway
Beaverton, OR 97006-5791
USA
BY POSTAL SERVICE:
Leupold Product Service
P.O. Box 688
Beaverton, OR 97075-0688
USA
For product questions, consult the Leupold Web site at:
leupold.com or call (800) LEUPOLD (538-7653).
Register your product at: Leupold.com/account/login
LEUPOLD, GOLDEN RING, MARK 4, the Golden Ring design, the circle-L reticle logo
design, and various other marks are registered trademarks of Leupold & Stevens,
Inc. All marks, including corporate logos and emblems, are subject to Leupold’s
rights and may not be used in connection with any product or service that is not
Leupold’s, or in any manner that disparages or discredits Leupold, or in a manner
likely to cause confusion.
Certain other trademarks used in connection with Leupold products and services
are the property of their respective owners, and are used with permission. BOONE
AND CROCKETT CLUB and BOONE AND CROCKETT are registered trademarks of
the Boone and Crockett Club. RMEF and ROCKY MOUNTAIN ELK FOUNDATION are
registered trademarks of the Rocky Mountain Elk Foundation. ADVANTAGE TIMBER
and ADVANTAGE TIMBER HD are trademarks or registered trademarks of Jordan
Outdoor Enterprises Ltd. MOSSY OAK BREAK-UP, MOSSY OAK BRUSH, MOSSY
OAK OBSESSION, and MOSSY OAK TREESTAND are trademarks or registered
trademarks of HAAS Outdoors, Inc. A.R.M.S. is a registered trademark of Atlantic
Research Marketing Systems, Inc.
We reserve the right to make design and/or material modifications without prior
notice.
Copyright © 2017 Leupold & Stevens, Inc. All rights reserved.
Trophy ScaleTM
The RX-FullDraw 3 lets you instantly and accurately judge the width
and/or height of a target using Trophy Scale. To be used properly, you
must enter the width/height measurement you would like to use as a
baseline. To set the Trophy Scale, enter the Quick
Set Menu and activate Trophy Scale. Once Trophy
Scale has been activated, press MODE to enter the
Trophy Scale value set-up. At this point, the Trophy
Scale value will be flashing; pressing POWER will
increase the Trophy Scale value two inches/5 cm,
at a time. The Trophy Scale value will begin at 10”/25 cm, for the
initial set-up, or the last saved value for subsequent changes, and will
progress up to 60”/150 cm. The next press of the POWER button
will reset the numbers to 10”/25 cm again. Press MODE or wait for
the power to “time out” to save the baseline measurement.
Once the baseline Trophy Scale value has been saved, the Trophy
Scale bracketing system will automatically adjust to changing
distances to the target, displaying a single mark on the left, and two
marks on the right. To use Trophy Scale, place the left edge of the
target on the left mark, the two marks on the right will represent
a range of widths; for example, the closest of the right marks may
represent a width of 21” and the farther mark may represent a width
of 29”. If the target brackets perfectly between the left mark and the
closer right mark, it measures 21”, if the target brackets perfectly
between the left mark and the farthest right mark, it measures
29”. If the target falls between the two right marks, it measures
approximately 25”. To measure height, the same marks are used,
but the RX-FullDraw 3 rangefinder must be held on its side. It is
important to note that distance may limit the sizes available as a
baseline measurement; small measurements may be limited at long
distances and large measurements may be limited at short distances.
Trophy Scale measurements are for reference only and may not be
exact.
Last Target Mode
This mode is used to display the distance to the
farthest object when more than one object may be
read. Multiple objects will often return an average
distance. Last Target Mode ensures an accurate
reading on the farthest object being ranged.
To activate Last Target mode, navigate through the
Quick Set Menu by pressing and releasing the MODE
button until the Last Target icon is shown in the left
portion of the display. Press and release the POWER
button to turn Last Target on/off.
3 Selectable Reticles
This mode allows you to choose any one of the 3 preloaded reticles
as the primary aiming point for the RX-FullDraw 3 digital laser
rangefinders. To select a reticle, press Mode repeatedly until the
in
Y
L
O
S
B
O
W
L
A
S
T
T
G
T
R
F
L
B
O
W
L
A
S
T
T
G
T
L
A
S
T
T
G
T
Warranty/Repair
The Leupold Electronics Warranty covers any defects in materials and
workmanship in the electronic components of RX, GX, and PinCaddie
Rangefinders, Vendetta Archery Rangefinders, Leupold Thermal
Optics, and other Leupold electronic products. This warranty lasts for
two-years from the date of purchase. For complete warranty details
visit leupold.com/leupold-core/leupold-dna/lifetime-guarantee.
In the event of a need for service or repair, please contact Leupold
Product Service at: leupold.com
in
Y
L
O
S
B
O
W
R
F
L
L
A
S
T
T
G
T
current reticle is blinking. Press POWER repeatedly to scroll through
the available reticles, then press MODE when the preferred reticle is
shown. The reticle choices are as follows:

Leupold & Stevens, Inc.
PO Box 688 Beaverton, Oregon 97075-0688
www.leupold.com
1-800-LEUPOLD (538-7653)
Part #174736 Artwork #174751B
BOW Mode
Your RX-FullDraw 3 always operates in BOW
mode utilizing Leupold’s legendary True Ballistic
Range (TBR) to provide the equivalent horizontal
range (level fire range) for arrows. TBR is a
marriage of laser ranging, an inclinometer, and an
advanced computerized ballistics program. The result is distance
measurements accurate within a yard, no matter the angle at which
the laser is fired. Arrows travel in a ballistic arc, yet conventional
rangefinders only provide a linear distance to your target. TBR
delivers the ballistic equivalent range to the target, accounting for
the effects of inclines or declines on the path of your arrow. The
displayed range represents the ballistically equivalent horizontal
distance to the target if the target is 175 yards or less. If the target
is farther than 175 yards (160 meters), the LOS icon will flash while
BOW remains displayed, and the resulting distance will be the Line Of
Sight distance only.
Most importantly, using your RX-FullDraw 3 effectively means to
Practice, Practice, Practice. Anytime you handle a bow or firearm,
you are ultimately responsible for your projectile.
Quick Set Menu
When you initially push the Power button, the unit is ready for ranging.
To enter the Quick Set Menu, press and hold the MODE button for at
least 1 second.
To manipulate a function, press and release the MODE button until
that function is displayed, then use the POWER button to change the
setting. If this is the last function to be changed, you can allow the
rangefinder to sit idle for 30 seconds which will cause an automatic
power-off, saving all selections. If additional functions require
manipulation, simply press and release MODE to continue through
the Quick Set Menu. Pressing and holding MODE for 1 second at
any time will save all changes, exit the Quick Set Menu, and prepare
the rangefinder for immediate use.
Note: Activating certain modes automatically disables other modes.
For example activating the yards mode will automatically deactivate
the meters mode.
Unit Output
This mode is used to choose between yards and meters
as the preferred unit of measure.
To choose between yards and meters, navigate
through the Quick Set Menu by pressing the
MODE button until “Unit” is shown in the upper
display. Press and release the POWER button to
alternate between yards and meters.
M
Y
Familiar reticle to shooters from riflescopes; draws eye to the center, easy to see, does
not cover the target in the center where aiming is most critical.
Reticle
with Plus Point™
Plus PointTM: Ideal for varmints and other small
targets. Small open center avoids coverage of very
small or distant targets.
Plus Point™
Reticle
without Plus Point™
Cleaning/Maintenance
Blow away dust or debris on lenses, or use a soft lens brush (such
as the one found on the Leupold LensPen). To remove fingerprints,
water spots or tougher dirt, use a soft cotton cloth or the cleaning end
of the Leupold LensPen. A lens tissue with lens cleaning fluid may
be used for more stubborn dirt. Always apply cleaning fluid to the
cleaning cloth, never directly to the lens.
To insert a new battery, remove battery cover (shown in diagram) and
remove exhausted battery. Insert new CR-2 battery, negative terminal
first, into the battery compartment. Close battery cover.
To focus the digital laser rangefinder, turn the eyepiece left or right
(you will feel and hear the clicking of the diopter, indicating a change
to the focus has been made) until crisp focus is achieved.
RX-FullDraw 3 is waterproof.
The RX-FullDraw 3 includes a lanyard and is equipped with a lanyard
attachment for added security in the field.
Helpful Hints for Using the RX FullDraw 3
Rangefinder does not provide range.
• Make sure that the POWER button is being depressed (as
opposed to MODE button)
• Make sure that nothing, such as your hand or finger, is
blocking the lenses — as this could interfere with the
emission and reception of the laser pulses
• Make sure unit is held steadily while depressing the
POWER button
• Make sure the target is at least 6 yards away
• Target may be beyond maximum distance
BY PARCEL SERVICE:
Leupold Product Service
14400 NW Greenbrier Parkway
Beaverton, OR 97006-5791
USA
BY POSTAL SERVICE:
Leupold Product Service
P.O. Box 688
Beaverton, OR 97075-0688
USA
For product questions, consult the Leupold Web site at:
leupold.com or call (800) LEUPOLD (538-7653).
Register your product at: Leupold.com/account/login
LEUPOLD, GOLDEN RING, MARK 4, the Golden Ring design, the circle-L reticle logo
design, and various other marks are registered trademarks of Leupold & Stevens,
Inc. All marks, including corporate logos and emblems, are subject to Leupold’s
rights and may not be used in connection with any product or service that is not
Leupold’s, or in any manner that disparages or discredits Leupold, or in a manner
likely to cause confusion.
Certain other trademarks used in connection with Leupold products and services
are the property of their respective owners, and are used with permission. BOONE
AND CROCKETT CLUB and BOONE AND CROCKETT are registered trademarks of
the Boone and Crockett Club. RMEF and ROCKY MOUNTAIN ELK FOUNDATION are
registered trademarks of the Rocky Mountain Elk Foundation. ADVANTAGE TIMBER
and ADVANTAGE TIMBER HD are trademarks or registered trademarks of Jordan
Outdoor Enterprises Ltd. MOSSY OAK BREAK-UP, MOSSY OAK BRUSH, MOSSY
OAK OBSESSION, and MOSSY OAK TREESTAND are trademarks or registered
trademarks of HAAS Outdoors, Inc. A.R.M.S. is a registered trademark of Atlantic
Research Marketing Systems, Inc.
We reserve the right to make design and/or material modifications without prior
notice.
Copyright © 2017 Leupold & Stevens, Inc. All rights reserved.
Trophy ScaleTM
The RX-FullDraw 3 lets you instantly and accurately judge the width
and/or height of a target using Trophy Scale. To be used properly, you
must enter the width/height measurement you would like to use as a
baseline. To set the Trophy Scale, enter the Quick
Set Menu and activate Trophy Scale. Once Trophy
Scale has been activated, press MODE to enter the
Trophy Scale value set-up. At this point, the Trophy
Scale value will be flashing; pressing POWER will
increase the Trophy Scale value two inches/5 cm,
at a time. The Trophy Scale value will begin at 10”/25 cm, for the
initial set-up, or the last saved value for subsequent changes, and will
progress up to 60”/150 cm. The next press of the POWER button
will reset the numbers to 10”/25 cm again. Press MODE or wait for
the power to “time out” to save the baseline measurement.
Once the baseline Trophy Scale value has been saved, the Trophy
Scale bracketing system will automatically adjust to changing
distances to the target, displaying a single mark on the left, and two
marks on the right. To use Trophy Scale, place the left edge of the
target on the left mark, the two marks on the right will represent
a range of widths; for example, the closest of the right marks may
represent a width of 21” and the farther mark may represent a width
of 29”. If the target brackets perfectly between the left mark and the
closer right mark, it measures 21”, if the target brackets perfectly
between the left mark and the farthest right mark, it measures
29”. If the target falls between the two right marks, it measures
approximately 25”. To measure height, the same marks are used,
but the RX-FullDraw 3 rangefinder must be held on its side. It is
important to note that distance may limit the sizes available as a
baseline measurement; small measurements may be limited at long
distances and large measurements may be limited at short distances.
Trophy Scale measurements are for reference only and may not be
exact.
Last Target Mode
This mode is used to display the distance to the
farthest object when more than one object may be
read. Multiple objects will often return an average
distance. Last Target Mode ensures an accurate
reading on the farthest object being ranged.
To activate Last Target mode, navigate through the
Quick Set Menu by pressing and releasing the MODE
button until the Last Target icon is shown in the left
portion of the display. Press and release the POWER
button to turn Last Target on/off.
3 Selectable Reticles
This mode allows you to choose any one of the 3 preloaded reticles
as the primary aiming point for the RX-FullDraw 3 digital laser
rangefinders. To select a reticle, press Mode repeatedly until the
in
Y
L
O
S
B
O
W
L
A
S
T
T
G
T
R
F
L
B
O
W
L
A
S
T
T
G
T
L
A
S
T
T
G
T
Warranty/Repair
The Leupold Electronics Warranty covers any defects in materials and
workmanship in the electronic components of RX, GX, and PinCaddie
Rangefinders, Vendetta Archery Rangefinders, Leupold Thermal
Optics, and other Leupold electronic products. This warranty lasts for
two-years from the date of purchase. For complete warranty details
visit leupold.com/leupold-core/leupold-dna/lifetime-guarantee.
In the event of a need for service or repair, please contact Leupold
Product Service at: leupold.com
in
Y
L
O
S
B
O
W
R
F
L
L
A
S
T
T
G
T
current reticle is blinking. Press POWER repeatedly to scroll through
the available reticles, then press MODE when the preferred reticle is
shown. The reticle choices are as follows: