Leuze electronic DCR 248i User manual

Original operating instructions
EN 2017/08 - 50135643 We reserve the right to make technical changes
DCR 248i
Camera-based code reader

© 2017
Leuze electronic GmbH & Co. KG
In der Braike 1
D-73277 Owen / Germany
Phone: [phone]
Fax: [phone]
http://www.leuze.com
Leuze electronic DCR 248i 2

Table of contents
Leuze electronic DCR 248i 3
Table of contents
1 About this document ............................................................................................6
1.1 Used symbols and signal words ............................................................................................. 6
2 Safety .....................................................................................................................8
2.1 Intended use ...........................................................................................................................8
2.2 Foreseeable misuse ............................................................................................................... 8
2.3 Competent persons ................................................................................................................ 9
2.4 Disclaimer ............................................................................................................................... 9
3 Device description ..............................................................................................10
3.1 Device overview....................................................................................................................10
3.1.1 About the DCR200i code reader ......................................................................................10
3.1.2 Performance characteristics..............................................................................................10
3.1.3 Accessories .......................................................................................................................11
3.2 Device construction .............................................................................................................. 12
3.3 Connection technology ......................................................................................................... 13
3.4 Indicators and operational controls....................................................................................... 13
3.4.1 LED indicators ...................................................................................................................14
3.4.2 Bar graph display ..............................................................................................................15
3.4.3 Control buttons ..................................................................................................................16
4 Functions.............................................................................................................17
4.1 Camera operating modes ..................................................................................................... 17
4.1.1 Single trigger mode ...........................................................................................................17
4.1.2 Reading gate control .........................................................................................................17
4.1.3 Burst mode ........................................................................................................................17
4.1.4 Presentation mode ............................................................................................................18
4.1.5 Continuous mode ..............................................................................................................18
4.2 Reference code comparison................................................................................................. 18
4.3 Code quality.......................................................................................................................... 19
4.4 Leuze webConfig tool ........................................................................................................... 20
5 Applications ........................................................................................................21
5.1 Reading of 1D-codes ............................................................................................................ 21
5.2 Reading of 2D-codes ............................................................................................................ 22
5.3 Code reading with polarization filter......................................................................................22
5.4 Code reading with diffusor foil .............................................................................................. 23
6 Mounting..............................................................................................................24
6.1 Determining the mounting position of the code reader ......................................................... 24
6.1.1 Selecting a mounting location ...........................................................................................24
6.1.2 Avoiding total reflection .....................................................................................................25
6.1.3 Determining the reading distance......................................................................................25
6.2 Mounting the code reader..................................................................................................... 28
6.2.1 Mounting with M4 fastening screws ..................................................................................28
6.2.2 Mounting with the BTU320M-D12 mounting system ........................................................28
6.2.3 Mounting with the BT320M mounting bracket ..................................................................29
6.2.4 Mounting with the BTU320M-D12-RL70 mounting bracket.............................................. 29
6.3 Replace housing hood .......................................................................................................... 29
6.4 Attaching the diffusor foil ...................................................................................................... 30

Table of contents
Leuze electronic DCR 248i 4
7 Electrical connection..........................................................................................32
7.1 Overview ............................................................................................................................... 33
7.2 PWR/SWIO – voltage supply / RS232/RS422 / switching inputs/outputs......................... 33
7.3 HOST - Host input / Ethernet / PROFINET........................................................................... 36
7.4 Ethernet star topology........................................................................................................... 36
7.5 Cable lengths and shielding.................................................................................................. 38
7.6 Connecting code reader to fieldbus ...................................................................................... 38
7.7 Connecting code reader to MA150 connection unit............................................................. 38
8 Starting up the device – Basic configuration...................................................40
8.1 Measures to be performed prior to the initial commissioning ............................................... 40
8.2 Starting the device ................................................................................................................ 40
8.3 Setting the communication parameters ................................................................................ 41
8.3.1 Manually setting the IP address ........................................................................................41
8.3.2 Automatically setting the IP address .................................................................................42
8.3.3 Address Link Label............................................................................................................42
8.3.4 Ethernet host communication............................................................................................43
8.3.5 RS232/RS422 communication ........................................................................................44
8.3.6 FTP client ..........................................................................................................................44
8.4 Configuration via configuration codes................................................................................... 44
8.5 Activating device functions ................................................................................................... 44
8.6 Performing further settings ................................................................................................... 46
8.6.1 Decoding and processing the read data............................................................................46
8.6.2 Control of the decoding .....................................................................................................46
8.6.3 Activating camera operating mode....................................................................................47
8.6.4 Control of the switching outputs ........................................................................................47
8.6.5 Optimizing reading performance .......................................................................................47
8.6.6 Transfer configuration data ...............................................................................................48
9 Commissioning – Leuzeelectronic webConfig tool........................................49
9.1 System requirements............................................................................................................ 49
9.2 Start webConfig tool ............................................................................................................. 49
9.3 Short description of the webConfigtool ................................................................................ 50
9.3.1 Change operating mode....................................................................................................51
9.3.2 Menu options of the webConfig tool ..................................................................................51
9.3.3 CONFIGURATION menu ..................................................................................................52
9.3.4 Configuring applications with the wizard ...........................................................................53
10 PROFINET............................................................................................................54
10.1 Overview ............................................................................................................................... 54
10.2 GSDML file............................................................................................................................ 54
10.3 Configuring for the Siemens SIMATIC-S7 control ................................................................ 55
10.4 PROFINET project modules ................................................................................................. 59
10.4.1 Overview of the modules...................................................................................................59
10.4.2 Module10–Activation ......................................................................................................61
10.4.3 Module13–Fragmented result ........................................................................................62
10.4.4 Module16–Fragmented entry .........................................................................................63
10.4.5 Module21–Result data 1 ................................................................................................63
10.4.6 Module22–Result data 2 ................................................................................................64
10.4.7 Module23–Result data 3 ................................................................................................65
10.4.8 Module24–Result data 4 ................................................................................................66
10.4.9 Module25–Result data 5 ................................................................................................67
10.4.10 Module26–Result data 6 ................................................................................................68
10.4.11 Module27–Result data 7 ................................................................................................69
10.4.12 Module28–Result data 8 ................................................................................................70

Table of contents
Leuze electronic DCR 248i 5
10.4.13 Module101–Entry data1 ................................................................................................71
10.4.14 Module102–Entry data2 ................................................................................................73
10.4.15 Module103–Entry data3 ................................................................................................74
10.4.16 Module104–Entry data4 ................................................................................................75
10.4.17 Module105–Entry data5 ................................................................................................77
10.4.18 Module106–Entry data6 ................................................................................................78
10.4.19 Module107–Entry data7 ................................................................................................79
10.4.20 Module108–Entry data8 ................................................................................................81
10.4.21 Module60-Device status and control ..............................................................................82
10.4.22 Module61-Device application status and control............................................................83
10.4.23 Module74–I/O status and control ...................................................................................83
11 Interfaces – Communication..............................................................................87
11.1 Online commands................................................................................................................. 87
11.1.1 Overview of commands and parameters...........................................................................87
11.1.2 General online commands ................................................................................................87
11.1.3 Online commands for system control ................................................................................92
11.2 XML-based communication .................................................................................................. 92
12 Care, maintenance and disposal .......................................................................93
13 Diagnostics and troubleshooting......................................................................94
14 Service and support ...........................................................................................95
14.1 What to do should servicing be required? ............................................................................ 95
15 Technical data .....................................................................................................96
15.1 General specifications .......................................................................................................... 96
15.2 Optical data........................................................................................................................... 97
15.2.1 Reading performance........................................................................................................97
15.2.2 Code specifications ...........................................................................................................97
15.3 Dimensioned drawings ......................................................................................................... 98
15.4 Dimensioned drawings - Accessories................................................................................... 98
16 Order guide and accessories...........................................................................102
16.1 Nomenclature ..................................................................................................................... 102
16.2 Type overview..................................................................................................................... 102
16.3 Optical accessories............................................................................................................. 103
16.4 Cables accessories............................................................................................................. 103
16.5 Other accessories............................................................................................................... 104
17 EC Declaration of Conformity..........................................................................106
18 Appendix............................................................................................................107
18.1 ASCII character set............................................................................................................. 107
18.2 Code samples..................................................................................................................... 110
18.3 Configuration via configuration codes................................................................................. 112
18.4 License terms...................................................................................................................... 113
18.5 Communication examples .................................................................................................. 114

About this document
Leuze electronic DCR 248i 6
1 About this document
1.1 Used symbols and signal words
Tab.1.1: Warning symbols and signal words
Symbol indicating dangers to persons
NOTE Signal word for property damage
Indicates dangers that may result in property damage if the measures for dan-
ger avoidance are not followed.
CAUTION Signal word for minor injuries
Indicates dangers that may result in minor injury if the measures for danger
avoidance are not followed.
Tab.1.2: Other symbols
Symbol for tips
Text passages with this symbol provide you with further information.
Symbol for action steps
Text passages with this symbol instruct you to perform actions.
Tab.1.3: Terms and abbreviations
CMOS Semiconductor process for implementing integrated
circuits
(Complementary Metal-Oxide-Semiconductor)
DCR Camera-based code reader
(Dual Code Reader)
EMC Electromagnetic compatibility
EN European standard
FE Functional earth
FOV Reading field of the code reader (Field of View)
GSDML Generic Station Description Markup Language
IO or I/O Input/Output
IO controller Control that initiates the IO data communication
IO device Decentral PROFINET fieldbus device
IP address Network address, which is based on the Internet
Protocol (IP)
LED LED
(Light Emitting Diode)
MAC address Hardware address of a device in the network
(Media Access Control address)
PCRE Regular expressions for reference code comparison
(Perl Compatible Regular Expressions)
PELV Protective extra low voltage with reliable disconnec-
tion
(Protective Extra Low Voltage)

About this document
Leuze electronic DCR 248i 7
ROI Region of interest of the code reader (Region of In-
terest)
PLC Programmable Logic Control
(corresponds to Programmable Logic Controller
(PLC))
TCP/IP Internet protocol family (Transmission Control Pro-
tocol/Internet Protocol)
UDP Network transmission protocol (User Datagram Pro-
tocol)
UL Underwriters Laboratories

Safety
Leuze electronic DCR 248i 8
2 Safety
This code reader was developed, manufactured and tested in accordance with the applicable safety stan-
dards. It corresponds to the state of the art.
2.1 Intended use
The code readers of the DCR200i series are camera-based code readers for all commonly used bar
codes, stacked codes and DataMatrix codes as well as for codes of the GS1DataBar family.
Areas of application
The code readers of the DCR200i series are especially designed for the following areas of application:
• Packaging systems
• Mounting/handling technology
• Analysis technology
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the device is operated in a
manner not complying with its intended use.
ÄOnly operate the device in accordance with its intended use.
ÄLeuzeelectronicGmbH+Co.KG is not liable for damages caused by improper use.
ÄRead these operating instructions before commissioning the device. Knowledge of the oper-
ating instructions is an element of proper use.
NOTICE
Integrated illumination!
The code readers of the DCR 200i series correspond to the following classification with respect
to the integrated illumination:
ÄIllumination red: risk group0 (exempt group) in acc. with EN62471
NOTICE
Comply with conditions and regulations!
ÄObserve the locally applicable legal regulations and the rules of the employer's liability insur-
ance association.
2.2 Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that use is considered im-
proper use.
In particular, use of the device is not permitted in the following cases:
• in rooms with explosive atmospheres
• in circuits which are relevant to safety
• In food processing
• for medical purposes
NOTICE
Do not modify or otherwise interfere with the device!
ÄDo not carry out modifications or otherwise interfere with the device.
The device must not be tampered with and must not be changed in any way.
ÄThe device may only be opened for exchanging the housing hood.
ÄThere are no user-serviceable parts inside the device.
ÄRepairs must only be performed by Leuze electronic GmbH + Co. KG.

Safety
Leuze electronic DCR 248i 9
2.3 Competent persons
Connection, mounting, commissioning and adjustment of the device must only be carried out by competent
persons.
Prerequisites for competent persons:
• They have a suitable technical education.
• They are familiar with the rules and regulations for occupational safety and safety at work.
• They are familiar with the operating instructions for the device.
• They have been instructed by the responsible person on the mounting and operation of the device.
Certified electricians
Electrical work must be carried out by a certified electrician.
Due to their technical training, knowledge and experience as well as their familiarity with relevant standards
and regulations, certified electricians are able to perform work on electrical systems and independently de-
tect possible dangers.
In Germany, certified electricians must fulfill the requirements of accident-prevention regulations BGV A3
(e.g. electrician foreman). In other countries, there are respective regulations that must be observed.
2.4 Disclaimer
LeuzeelectronicGmbH+Co.KG is not liable in the following cases:
• The device is not being used properly.
• Reasonably foreseeable misuse is not taken into account.
• Mounting and electrical connection are not properly performed.
• Changes (e.g., constructional) are made to the device.

Device description
Leuze electronic DCR 248i 10
3 Device description
3.1 Device overview
3.1.1 About the DCR200i code reader
The code readers of the DCR200i series are camera-based code readers for all commonly used bar
codes, stacked codes and Data Matrix codes (e.g. Code128, EAN8/13, ECC200, QR etc.) as well as for
codes of the GS1DataBar family.
The extensive options for device configuration via control buttons, configuration codes or software enable
adaptation to a multitude of reading tasks. The high resolution in combination with a very high depth of field
as well as the compact design make the device ideal for use in packaging machines.
Code readers of the DCR200i series perform numerous tasks in industrial code reading such as:
• Omnidirectional code reading
• Reading of codes while at a standstill or in motion
• Manual reading by holding up codes
• In packaging machines
• In automatic handling and testing machines
The DCR2xxi code readers are available in several optics models:
• DCR2xxi with HighDensity optics (N-optics)
• DCR2xxi with MediumDensity optics (M optics)
• DCR2xxi with LowDensity optics (F optics)
The DCR2xxi code readers are operated as a “stand-alone” single device with individual IP address in an
Ethernet star topology.
Information on technical data and characteristics: see chapter 15 "Technical data".
3.1.2 Performance characteristics
• Decoding of 1D-, stacked- and 2D-codes
• Maximum depth of field and reading distance of approx. 40mm…360mm
• High object speed and decoding performance of up to 7m/s with 10decodings
• Reference code comparison
• Quality evaluation of 1D bar codes and 2D-codes in accordance with ISO/IEC15415 and ISO/
IEC15416
• Integrated process interfaces RS232, RS422, Ethernet and PROFINET
The MA2xxi modular connection units are available for connecting to other fieldbus systems, e.g.,
PROFIBUS, EtherCAT, etc.
• Four freely programmable switching inputs/outputs for the activation or signaling of states:
• 1 switching input
• 1 switching output
• 2 switching inputs/outputs
• Integrated red LED illumination for illumination of the rectangular read field
• Green feedback LED for direct acknowledgment of whether the read process was successful
• Two control buttons for intuitive operation without PC
• Industrial design: degree of protection IP65 acc. to EN60529
• Diverse mounting options with mounting threads on rear and side surfaces
• Variously coded M12 connections for unique assignment of the connections:
• Voltage supply, RS232/RS422, switching inputs/outputs
• Ethernet/PROFINET connection
• webConfig, a web-based configuration tool for configuration of all device parameters
No additional configuration software necessary