LevelOne KVM-0217 User manual

LevelOne
KVM-0217
17” Modularized KVM Console
User Manual
V1.0.0-0708

SAFETY INSTRUCTIONS
1. Please read these safety instructions carefully.
2. Please keep this User Manual for later reference.
3. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed
detergent for cleaning. Use moisture sheet or clothe for cleaning.
4. For pluggable equipment, the socked-outlet shall be installed near the equipment and shall be
easily accessible.
5. Please keep this equipment from humidity.
6. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
7. Do not leave this equipment at temperature above 600C. It may damage the equipment.
8. The opening on the enclosure is for air convection hence the equipment from overheating. DO
NOT COVER THE OPENING.
9. All cautions and warning on the equipment should be noted.
10. If the equipment is not in use for long time, disconnect the equipment from mains to avoid being
damaged by transient over-voltage.
11. Never pour any liquid into ventilation openings; this could cause fire or electrical shock.
12. Never open the equipment. For safety reason, only qualified service personnel should open the
equipment.
13. If one of the following situations arises, get the equipment checked by service personnel.
zThe Power Cord or plug is damaged.
zLiquid has penetrated into the equipment.
zThe equipment has been exposed to moisture.
zThe equipment has not worked well or you can not get it work according to User Manual.
zThe equipment has dropped and damaged.
zThe equipment has obvious signs or breakage.
2

3
INDEX OF CONTENTS
CHAPTER 1 INTRODUCTION................................................................................................ 4
1.1 OVERVIEW............................................................................................................................4
1.2 PACKING LIST.................................................................................................................... 4
CHAPTER 2 INSTALLATION ................................................................................................. 5
2.1 INSTALL CONSOLE TO CABINET..............................................................................................5
2.1.1 Before Installation.........................................................................................................5
2.1.2 Hardware kits contents:................................................................................................5
2.1.3 Installation Step............................................................................................................7
2.1.4 Replace bracket A step (For cabinet depth 828 ~ 1000 mm):......................................9
2.1.5 Replace bracket B and C step (For cabinet depth is 504 ~ 614 mm):........................ 10
2.2 KVM SWITCH MODULE INSTALLATION...................................................................................12
2.3 UNLOAD STEPS ................................................................................................................... 14
2.4 CONNECTING THE CONSOLE AND CONFIGURING THE DISPLAY SETTINGS .............................. 16
2.4.1 Configuring the Display Settings................................................................................. 16
2.4 TURNING ON THE CONSOLE................................................................................................. 16
2.5 TESTING THE CONSOLE....................................................................................................... 16
CHAPTER 3 PANEL CONTROLS AND OSD FUNCTIONS................................................. 18
3.1 AUTO TUNE......................................................................................................................... 18
3.2 BRIGHTNESS....................................................................................................................... 18
3.3 CONTRAST.......................................................................................................................... 18
3.4 COLOR ...............................................................................................................................19
3.5 POSITION............................................................................................................................ 19
3.6 LANGUAGE.......................................................................................................................... 19
3.7 RECALL ..............................................................................................................................20
3.8 EXIT ...................................................................................................................................20
3.9 POWER INDICATOR.............................................................................................................. 20
TECHNICAL SPECIFICATIONS ............................................................................................... 21
KVM-0217 SPECIFICATIONS .....................................................................................................21

4
CHAPTER 1 Introduction
1.1 Overview
Congratulations on your purchase of LevelOne KVM-0217 17-inch modularized KVM console.
The 17-inch large size TFT LCD color display and ultra-low-profile compact industrial keyboard /
touchpad provide the user-friendliest and most reliable environment for server and network
administrators. With the unique modular design, user can easily integrate with KVM switches
and expand the system. *
All these functions are integrated in a 19-inch 1U space with rugged construction design to
achieve ultra space saving and high reliability for high quality industrial network applications.
This user manual tells you how to install your KVM-0217, how to operate the OSD (On Screen
Display) and the specifications. For KVM switch functions, please refer to KCM-0831/1631 user
manual.
* KVM-0217 must co-work with KCM-0831 or KCM-1631, it is not a stand alone device.
For stand alone KVM console, please refer to KVM-0115 or KVM-0117.
1.2 PACKING LIST
The complete KVM-0217 package consists of:
z1U 19” rack mount console
zTwo rail with front and rear bracket
zTwo brackets A. (Needed for rack depth 828 ~ 1000 mm)
zTwo brackets B. (Needed for rack depth 504 ~ 614 mm)
zTwo brackets C. (Needed for rack depth 504 ~ 614 mm)
zPower Adapter
zCD Manual
zQuick Installation Guide
zTwo keys
zScrews
Check to make sure that the unit was not damaged in shipping. If you encounter a problem, contact
your local dealer.
Please read this manual thoroughly, and follow the installation and operation procedures carefully to
prevent any damage to the product, and/or any of the devices that connect to it.

CHAPTER 2 INSTALLATION
2.1 Install Console to Cabinet
2.1.1 Before Installation
1. Before installation, please check all peripherals according to the list. Make sure the whole unit
was not damaged and lost during shipping process. If you encounter any problem, please
contact your local dealer.
2. Before installation, make sure all peripherals and computer have been turned off.
3. The standard brackets are for 614~1000mm (distance means front bracket to rear bracket)
cabinet, contact your dealer if you need longer rear brackets.
4. If your cabinet depth is 828 ~ 1000 mm, please refer to “Replace bracket A step”. If your
cabinet depth is 504 ~ 614 mm, please refer to “Replace bracket B and bracket C step”.
2.1.2 Hardware kits contents:
1. Rail with front and rear bracket x 2 (Please identify the brackets. Right and left sides are different.
For cabinet depth 614 ~ 828 mm)
2. Bracket A x 2 (For cabinet depth 828~1000 mm. Please refer page 5)
3. Bracket B x 2 (For cabinet depth 504 ~614 mm. Please refer page 6)
4. Bracket C x 2 (For cabinet depth 504 ~614 mm. Please refer page 6)
5

5. Screw (length = 6 mm) x 6
6. Screw x 8
7. Key x 2
6

2.1.3 Installation Step
1. Adjust rail until two screws appear.
two screws
rail
2. Loose (Not remove) seven rear screws.
3. Adjust rail to fit your cabinet
4. Install front and rear bracket on cabinet.
7

5. Tight seven rear screws up.
6. Repeat step 1~5 for the other side.
7. Push console into rails. (Be careful rear box loose when take out console from carton.)
8. Unlock and pull rail–lock switch (left and right at the same time) then push console to the end.
unlock
lock
8
rail-lock switch
9. Install three screws (length = 6 mm) in rear of the console. (Both sides)

10. Finish installation as below.
2.1.4 Replace bracket A step (For cabinet depth 828 ~ 1000 mm):
1. Loose (Not remove) seven rear screws.
9
2. Release six screws.
3. Take rear bracket out.
original bracket

4. Adjust rail and input bracket A to rear of the rail then adjust bracket A to fit your cabinet. Install
2~3 screws (don’t tight-up) upon the length you need. One is forbidden.
bracket A
5. Repeat step 1 ~ 4 for the other side.
6. Repeat step 3 ~ 10 of install console to finish installation.
2.1.5 Replace bracket B and C step (For cabinet depth is 504 ~ 614 mm):
1. Remove seven rear screws.
2. Take two original brackets out.
original bracket
original bracket
3. Input bracket B to rear of the rail.
10
bracket B