Leviton 8" User manual

Leviton Fresnels utilize the latest advances in lighting technology to
provide the best quality fixture in the market. This operating guide will help
you to become more familiar with your spotlight. The major components
of the fresnel are:
1 The door assembly — Includes the lens door, accessory clips,
latch mechanism, safety latch and the fresnel lens.
2 The lamp carriage — Includes the lampholder, wiring, reflector and
the lampholder platform and associated parts.
3 The focus system — Includes the focus handle, pinion gear and
associated hardware.
4 The housing — Includes the extruded housing, cool focusing
handles, and simple, rugged design.
PK-93196-10-00-0A
Functions
Lamp Installation
Disconnect the unit from power. Open
the lens door by pulling the top of the
door pivot latch towards you. This will
allow the door to swing open, revealing
a lamp carriage assembly with a
lampholder and reflector mounted to the
platform.
To lamp the theatre fixture, Cat.
No. FR2TH, align the flanges
of the pre focus lamp with the
respective indentations of the
pre focus lampholder. Please
note the lamp flanges are
asymmetrical, and the large
lamp flange must align with
large socket indentation. After
alignment, press lamp down
by the ceramic base and twist
clockwise 90° until lamp locks in
position.
To lamp the television fixture,
Cat. No. FR2TV, release the
locking lever of the bipost
socket so the lever is parallel
to the extruded housing. Insert
the bipost lamp into the socket
until the lamp stops, then lock
the lever to the original position.
The socket should firmly hold
the lamp in position. Be sure
that the lever is completely
closed.
Close the lens door until latch engages.
NOTE
Please do not touch the quartz lamp envelope during installation. If this
occurs, clean the lamp with isopropyl (rubbing) alcohol and lint free,
clean cloth.
These Leviton fresnels are UL listed to 2000 watts. Any usage of higher
wattage lamps is improper usage of the fixture and voids any manufacturing
warranties. Please use only the lamps listed in the charts shown here.
Focusing
The Leviton fresnels have an
extremely wide focusing range, with
spot focus applications to 85' and ten
foot projected diameters at only 8' in
full flood focus. The focus system is
simple to operate and maintain.
The focusing is controlled on the right
side of the fixture, simply turn the
handle clockwise for flood focus and
counter clockwise for spot focus.
Beam Control
The fresnel spotlight is a soft focusing projector that may be framed to reduce
flare or direct the light through Leviton barn doors and top hats. The beam
may be further softened through wire scrims or filters. Color temperature may
be shifted with Leviton dichroic glass filters, or normal color medium.
The Leviton fresnels accept industry standard 10" x 10" accessories, allowing
the fixtures to accept automated color changers, liquid crystal strobe effects
and many other items.
Color
Lee Color Effect Filters are recommended for all filter applications. These
filters are available in over 175 colors, color corrections, and diffusion
selections. Lee Filters are available in both 21" x 4" sheets and 25' x 4' rolls.
Maintenance
Reflector
The reflector may be accessed by
opening the lens door. Remove
lamp to access reflector surface for
cleaning. The Alzak® finish requires
little maintenance, occasionally wipe
with isopropyl (rubbing) alcohol, and a
lint free cloth. Strong alcohol or acidic
cleaners MUST NOT be used.
Lens
The lens will become dirty due to
environmental conditions. To clean,
use a lint-free cloth and rubbing
alcohol. Do not use commercial
lens cleaners. If significant dirt and
grime exist, remove the lens from
the fixture and place lens in clean
water WITHOUT SOAP. Rinse
grime away, clean the reflector
with alcohol.
Focus System
The rack and pinion focus system
can lose tension over long periods of
time by expansion and contraction of
the fixture housing and components,
or the gear itself could move causing
improper fitting against the cast rack.
Both items are easily resolved.
The tension is adjusted by turning
the center screw within the focus
handle while the fixture is aimed 90
degrees down, so the full weight of
the lampholder assembly bears on the
focus gear. Tighten the screw until the
assembly does not move. Do not over
tighten.
The focus gear should interface
smoothly with the rack on the focus
platform. To adjust, aim fixture to a
horizontal axis or place unit on a table.
Remove the focus handle. Loosen but do
not remove the screws on each side of
the focus gear. Reach inside the fixture
and move the socket assembly manually.
Adjust the focus gear so the assembly
is halfway between maximum possible
engagement into the rack and the point
where gears will slip. Tighten the two
screws when focus gear reaches that
point.
The focus assembly will grind against the
rack if engaged too deeply, and gears will
slip if adjustment is too high.
LIMITED TWO YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of
anyone else that this product at the time of its sale by Leviton is free of defects
in materials and workmanship under normal and proper use for two years
from the purchase date. Levitonʼs only obligation is to correct such defects by
repair or replacement, at its option, if within such two year period the product is
returned prepaid, with proof of purchase date, and a description of the problem to
Leviton Manufacturing Co., Inc., Att: Service Department, 20497 SW Teton
Ave., Tualatin, Oregon 97062. All products returned to Leviton-NSI must have
factory authorization for return prior to shipping. The purchaser is responsible
for completing and mailing to Leviton, within 15 days of purchase, the warranty
registration card enclosed with each product. This warranty excludes and
there is disclaimed liability for labor for removal of this product or reinstallation.
This warranty is void if this product is installed improperly or in an improper
environment, overloaded, misused, opened, abused, or altered in any manner,
or is not used under normal operating conditions or not in accordance with any
labels or instructions. There are no other or implied warranties of any kind,
including merchantability and fitness for a particular purpose, but if any implied
warranty is required by the applicable jurisdiction, the duration of any such
implied warranty, including merchantability and fitness for a particular purpose,
is limited to two years. Leviton is not liable for incidental, indirect, special, or
consequential damages, including without limitation, damage to, or loss of use
of, any equipment, lost sales or profits or delay or failure to perform this warranty
obligation. The remedies provided herein are the exclusive remedies under this
warranty, whether based on contract, tort or otherwise.
Part No. Description
000-A2KBD-000 Eight leaf barn door
000-A2KCF-000 Diffusion frame
000-A2KSS-000 Set, single, half/single scrim
000-A00CS-000 Combo stud for flat yoke
000-A2KTH-000 8" Top hat
Accesories
8" Theater Fresnel, Cat. No. FR2TH, with lamp No. 176-194, 2000W
ANSI Code BVW
For field diameter at any distance, multiply that distance by 0.269 for spot
and 1.238 for flood.
Beam Candlepower
Spot 358,000
Flood 37,000
8" Television Fresnel, Cat. No. FR2TV, with lamp No. 176-075, 2000W
ANSI Code CYX
For field diameter at any distance, multiply that distance by 0.265 for spot
and 1.32 for flood.
Beam Candlepower
Spot 358,000
Flood 39,500
Photometric Performance
Part Color Life
Watts No. ANSI Temp. (Hrs.)
2000 176-194 BVW 2000W, 250 hr., 3200°K, 120V
1500 176-193 CWZ 1500W, 325 hr., 3200°K, 120V
1000 176-192 BVV 1000W, 200 hr., 3200°K, 120V
1000 176-191 BVT 1000W, 500 hr., 3050°K, 120V
2000 6994C 2000W, 400 hr., 3200°K, 220/240V
1000 T-16 1000W, 750 hr., 3050°K, 220/240V
1000 T-2 1000W, 200 hr., 3050°K, 220/240V
Recommended Lamps for 8” Theater Fresnel
Part Color Life
Watts No. ANSI Temp. (Hrs.)
2000 176-075 CYX 2000W, 200 hr., 3200°K, 120V
1500 176-157 CXZ 1500W, 300 hr., 3200°K, 120V
1000 176-161 CYV 1000W, 200 hr., 3200°K, 120V
2000 476-055/056 CP41 2000W, 200 hr., 3200°K, 220/240V
650 476-048/049 CP39 650W, 100 hr., 3200°K, 220/240V
Recommended Lamps for 8” Television Fresnel
8" THEATRE AND
TELEVISION FRESNELS
USER GUIDE

Leviton NSI Division Headquarters
20497 SW Teton Avenue, Tualatin, OR 97062
Customer Service Telephone: [phone]
Customer Service Fax: [phone]
Technical Services: 800.959.6004
Leviton Manufacturing Company, Incorporated.
59-25 Little Neck Parkway, Little Neck, NY 11362-2591.
Visit Levitonʼs websites at http://www.nsicorp.com
& http://www.leviton.com
Copyright® 2003. Leviton Manufacturing Company, Inc. All Rights Reserved
Specifications and pricing subject to change at any time.
54
53
50
51
41
52
49
48
47
46
45
44
43
42
41
40
13
12
10
9
2
4
14
15
16
17
18
19
20
22
17
21
7
23
5
11
70
20
24
25
26
26
17
1
3
27
28
29
30
25
31
32
33
34
6
39
38
23
8
36
35
37
23
55
56
57
58 20
59
20
60
61
62
63
64
65
67 66
20
68
68
20
66
67
69
58
57
23
20
59
55
56
20
LAMP HOUSING ASSEMBLY
Ref. Qty. Description Item Number
1 1 Upper right housing
2 1 Upper left housing
3 1 Lower right housing
4 1 Lower left housing
5 1 Top housing
6 1 Focus track
7 1 Front cover
8 1 Rear cover
9 1 Standoff disk N00-HD237-690
10 3 Rivet, 3/16" x 11/16" N00-HD913-400
11 1 Yoke N00-SM281-330
12 1 Washer, flat
13 1 Bolt, hex head, 1/4-20 x 1"
14 1 Screw, pan head, 10-24 x 1"
15 1 Focus handle N00-KN280-950
16 1 Washer, fibre
17 5 Screw, pan head, 8-32 x 3/4”
18 2 Wave washer N00-HD223-440
19 1 Focus gear assembly N01-SM280-570
20 13 K-lock nut, 8-32
21 2 Screw, pan head, 10-24 x 3/4”
22 1 Hinge N00-HD781-900
23 30 Screw, flat head, 8-32 x 1/2"
24 1 Ring terminal
25 1 Green wire
26 2 Washer, internal tooth, #8
27 1 Strain relief
28 1 Sleeving, 32" long
29 1 Black wire
30 1 White wire
31 1 Standoff disk N00-SM237-550
32 3 Rivet, 3/16" x 7/16"
33 1 Pressure disk N00-SM243-380
34 1 T-bolt N00-HD062-000
35 4 Screw, pan head, 6-32 x 3/8" N00-HD020-800
36 1 Light shield
37 2 K-lock nut, 10-24
38 1 Tilt handle N00-HD707-000
39 2 Screw, pan head, 10-24 x 2"
70 1 C-clamp 000-A00CC-000
DOOR ASSEMBLY
Ref. Qty. Description Item Number
40 1 Lens door assembly
41 2 Screw, pan head, 6-32 x 1/2"
42 1 Lock pin
43 1 Latch handle
44 1 Commpression spring
45 1 Safety clip
46 1 Retaining ring
47 1 Knob
48 1 K-lock nut, 6-32
49 1 Latch
50 1 Latch spring
51 1 Washer, flat
52 1 Screw, pan head, 6-32 x 1"
53 1 8" Fresne lens N01-LE020-110
54 4 Lens fastener N00-HD935-730
PLATFORM ASSEMBLY — THEATER FRESNEL
Ref. Qty. Description Item Number
55 4 Screw, pan head, 8-32 x 3/4"
56 1 Screw, pan head, 8-32 x 1/2"
57 1 Lampholder platform
58 4 Carriage assembly guide N00-SM275-250
59 1 Cable clamp
60 1 Mogul prefocus adapter
61 1 Adapter brace
62 1 Mogul prefocus socket N01-SK020-260
63 2 Washer, flat, #10
64 2 Screw, pan head, 10-24 x 1" N00-HD031-320
65 1 Shield
66 1 Reflector mount
67 4 Rivet, 1/8" x 1/4"
68 1 Reflector
PLATFORM ASSEMBLY — TELEVISION FRESNEL
Ref. Qty. Description Item Number
69 1 Lampholder N00-AS282-310
PK-93196-10-00-0A

DOCUMENTATION
LEVITON INSTRUCTION SHEET/MANUAL
SPECIFICATIONS
EC 2/21/05
Helvetica
PK-93196-10-00-0A
Black
Final fold size:
20# White paper
Dull/Smooth finish TopKote
5.5" X 11"
Overall size:
25.75" X 11"
Paper size:
FOLDING DIAGRAM