Levoit LV-PUR131S User manual

Smart True HEPA Air Purifier
Model: LV-PUR131S
Questions or Concerns?
Please contact us at [email protected].
USER MANUAL
Powered by
EN DE

2
Package Contents
Specifications
Safety Information
Getting to Know Your Air Purifier
Controls
Getting Started
VeSync App Setup
Using Your Air Purifier
About the Filters
Care & Maintenance
Troubleshooting
VeSync App Troubleshooting
Warranty Information
Customer Support
3
3
4
5
6
7
8
8
10
11
14
16
17
17
Note: Your air purifier is compatible with
the VeSync app for performing many smart
home functions. For full details on using
the VeSync app with your air purifier, scan
the QR code to see the extended digital
manual.
You can also type the following link into a
web browser:
www.levoit.com/lvpur131s/downloads
Table of Contents
EN
DE Inhaltsverzeichnis
Lieferumfang
Technische Daten
Sicherheitshinweise
Ihr Luftreiniger
Bedienungstasten
Erste Schritte
Einrichten der VeSync-App
Der Gebrauch Ihres Luftreinigers
Die Filter
Pflege und Wartung
Problemlösung
VeSync App Problembehebung
bei Fehlern
Garantie
Kundendienst
18
18
19
21
22
23
24
24
26
27
31
33
34
34
Hinweis: Ihr Luftreiniger ist kompatibel mit
der VeSync-Haustechnik-App. Für weitere
Informationen zum Gebrauch der VeSync-
App mit Ihrem Luftreiniger scannen Sie
den QR-Code, um das ausführliche digitale
Handbuch abzurufen.
Oder geben Sie den folgenden Link in Ihren
Webbrowser ein:
www.levoit.com/lvpur131s/downloads

3
EN
Power Supply AC 220–240V,
50/60Hz
Rated Power 40W
Eective Range ≤ 48 m² / 516 ft²
Operating
Conditions
-10°–40°C / 14°–104°F
Noise Level 23–52dB
Clean Air
Delivery Rate
(CADR)
230 m³/h / 135 CFM
Standby Power < 0.8W
Dimensions 37.1 x 18.3 x 47 cm /
14.6 x 7.2 x 18.5 in
Weight 5.21 kg / 11.49 lb
Package Contents Specifications
English
User Manual
Smart True HEPA Air Purifier
Model: LV-PUR131S
1 x Smart Air Purifier
1 x High-Eciency Activated Carbon Filters
(Pre-Installed)
1 x Fine Preliminary/True HEPA Combination
Filters (Pre-Installed)
1 x Quick Start Guide
1 x User Manual

4
EN
SAFETY INFORMATION
• Only use your air purifier as described
in this manual.
• Do not use your air purifier outdoors.
• Keep your air purifier away from water,
and wet or damp areas. Never place in
water or liquid.
• Keep your air purifier away from heat
sources.
• Do not use where combustible gases,
vapours, metallic dust, aerosol (spray)
products, or fumes from industrial oil are
present.
• Keep 1.5 m / 5 ft away from where
oxygen is being administered.
• Supervise children when they are near
the air purifier.
• Do not place anything into any opening
on the air purifier, unless directed by the
manual.
• Do not sit or place heavy objects on the
air purifier.
• Keep the inside of the air purifier dry.
To prevent moisture buildup, avoid
placing in rooms with major temperature
changes or underneath air conditioners.
To reduce the risk of fire, electric shock, or other injury, follow all instructions and
safety guidelines.
General Safety
• Keep air purifier near the outlet it is
plugged into.
• Never place the cord near any heat
source.
• Do not cover the cord with a rug,
carpet, or other covering. Do not place
the cord under furniture or appliances.
• Keep the cord out of areas where
people walk often. Place the cord
where it will not be tripped over.
Plug & Cord
• Always unplug your air purifier before
servicing (such as when changing
filters).
• Do not use your air purifier if it is
damaged or not working correctly, or if
the cord or plug is damaged. Do not try
to repair it yourself. Contact Customer
Support (see page 17).
• WARNING: To reduce the risk of fire
or electric shock, do not use this air
purifier with solid-state speed controls
(such as a dimmer switch).
• Not for commercial use.
Household use only.
READ AND SAVE THESE
INSTRUCTIONS

5
EN
GETTING TO KNOW YOUR AIR PURIFIER
LED DISPLAY
A. LED Display
B. Touch-Control Panel
C. Dust Sensor Lens
D. Dust Sensor Cover
A. On/O Indicator
B. WiFi® Indicator
C. Check Filter Indicator
D. Timer Display
E. Air Quality Indicator
F. Auto Mode
G. Sleep Mode
H. Fan Speed
E. Button Vent
F. Filter Indicator Reset Button
G. Housing
H. Safety Switch
AB
G
H
I
A
D
H
F
C
B
G
E
J
L
K
C
D
F
E
I. Activated Carbon Filter
J. Fine Preliminary Filter
K. True HEPA Filter
L. Back Cover

6
EN
CONTROLS
On/O Button
• Turns the air purifier on/o.
• Press and hold to configure
your air purifier. See
extended digital manual
(QR code on page 2).
Display O Button
• Turns the display o.
• Press any button (except
) to turn the display
back on.
Sleep Mode Button
• Turns Sleep Mode on/o
(see page 8).
Timer Button
• Sets or cancels a timer
(see page 9).
Auto Mode Button
• Turns Auto Mode on/o
(see page 9).
Air Quality Indicator
• Displays air quality using the automatic
dust sensor inside the air purifier.
• The air purifier may take up to 1 minute
to detect air quality.
Fan Speed Button
• Cycles through fan
speeds: low, medium, and
high.
• The fan speed cannot be
changed in Auto or Sleep
Mode.
Air Quality Indicator Chart
Colour Air Quality
Red Bad
Yellow Moderate
Green Good
Blue Very Good

7
EN
GETTING STARTED
1. Open the back cover of the air purifier
and remove both filters from their plastic
packaging. [Figure 1.1]
2. Place the Activated Carbon Filter back
into the air purifier, followed by the Fine
Preliminary/True HEPA Combination
Filter. Make sure the pull tabs on both
filters are facing out. [Figure 1.2]
3. Replace the back cover by lining up
the cover’s feet with the slots in the
bottom of the housing. Make sure that
the triangular piece at the bottom of
the cover is touching the safety switch.
[Figure 1.3]
4. Push the cover closed.
5. Place the air purifier on a hard,
flat surface. Leave 38 cm / 15 in of
clearance on all sides of the air purifier.
[Figure 1.4]
Note: Do not remove the foam
piece attached to the dust sensor
cover unless instructed by Customer
Support. [Figure 1.5]
Figure 1.1
Figure 1.4
Figure 1.5
Figure 1.2
Figure 1.3
Tabs facing
outward
38 cm /
15 in
Safety
switch
38 cm /
15 in

8
EN
VESYNC APP SETUP
1. To download the VeSync app, scan
the QR code or search “VeSync” in the
Apple App Store® or Google Play Store.
[Figure 2.1]
2. Open the VeSync app. If you already
have an account, tap Log In. To create a
new account, tap Sign Up.
3. Follow the in-app instructions to finish
setting up your air purifier. For more
information, see the extended digital
manual (QR code on page 2).
Figure 2.1
Available on the
App Store
GET IT ON
Google Play
Note:
• You can use the VeSync app
to control these functions, and
more. For full instructions, see the
extended digital manual (QR code
on page 2).
• For best results, run the air purifier
at high speed for 15–20 minutes
before using a lower speed or Auto
Mode.
• To eectively clean air, keep
windows closed while the air
purifier is operating.
USING YOUR AIR
PURIFIER
General Operation
Sleep Mode
1. Press to turn the air purifier on/
o. The air purifier fan will start
automatically at low speed.
2. Optionally, press to increase fan
speed. You can also select Auto or
Sleep Mode, or set a timer.
Sleep Mode uses the lowest possible fan
speed to maintain a quiet environment.
• Press to turn Sleep Mode on/o.
• Pressing or will also exit Sleep
Mode.

9
EN
Auto Mode
Timer
Automatic Shutoff
Memory Function
Auto Mode uses the dust sensor inside
the air purifier to adjust the fan speed
automatically based on air quality. For
example, if the air quality is bad, the fan will
automatically be set to high speed.
• Press to turn Auto Mode on/o.
• Pressing or will also exit Auto
Mode.
You can set a timer between 1–12 hours.
• Press repeatedly to choose a time
in increments of 1 hour. When you stop
pressing , the display will flash 3 times
and the timer will start.
• The air purifier will automatically turn o
once the timer is finished.
• To cancel a timer, press repeatedly
until the display reads “-:--” and flashes
3 times.
As a safety feature, the air purifier will
automatically turn o if the back cover is
removed.
When the air purifier is plugged in, it will
remember its programmed settings while
turned o, and resume those settings when
turned back on.
Auto Mode Chart
Colour Air Quality Fan Speed
Red Bad High
Yellow Moderate Medium
Green Good Low
Blue Very Good Sleep Mode
USING YOUR AIR PURIFIER (CONT.)

10
EN
ABOUT THE FILTERS
A. Fine Preliminary Filter
• Captures large particles such as
dust, lint, fibres, hair, and pet fur.
• Maximises the life of the True
HEPA Filter by protecting it.
B. True HEPA Filter
• Removes at least 99.97% of
airborne particles 0.3 micrometres
(µm) in diameter.
• Filters small particles such as
mould spores, tiny dust particles,
parts of smoke, and allergens such
as pollen, dander, and mites.
C. High-Eciency Activated Carbon Filter
• Physically adsorbs smoke,
odours, and fumes.
• Filters compounds such as
formaldehyde, benzene,
ammonia, hydrogen sulphide,
and volatile organic compounds
(VOCs).
This air purifier uses a 3-stage filtration system to purify air.

11
EN
CARE & MAINTENANCE
Check Filter Indicator
Cleaning the Filters
Cleaning the Air Purifier
A. The Fine Preliminary Filter should be
cleaned once a month to increase
eciency and extend the life of your
filter. Clean the Fine Preliminary Filter
using a brush or vacuum hose to
remove hair, dust, and large particles.
B. Do not clean the True HEPA Filter. Fine
dust or bacteria may be released back
into the air if cleaning is attempted. Only
clean the Fine Preliminary Filter.
C. The Activated Carbon Filter does not
require cleaning.
Wipe the outside of the air purifier with a dry
cloth. Do not clean with water or any other
liquid, to avoid risk of electric shock.
A B
C
Replacing the Filters
1. Unplug the air purifier, then remove the
back cover.
2. Remove the old filters and properly
dispose of them.
3. Unwrap the new filters. Place the
Activated Carbon Filter inside the
housing. Make sure the pull tabs are
facing out.
4. Install the Fine Preliminary/True HEPA
Combination Filter into the housing.
Make sure the pull tabs are facing out.
5. Replace the back cover. The air purifier
will not turn on unless the back cover is
replaced correctly.
6. Reset the Check Filter Indicator (see
page 13).
The Check Filter Indicator will light up as a
reminder to check the filters. Depending on
how often you use the air purifier, the indicator
should turn on within 6–8 months. You may not
need to change your filters yet, but you should
check them when the indicator light turns on.
The Check Filter Indicator is only intended as
a reminder. When your air purifier is set up with
the VeSync app, you can also check the app to
see your remaining filter life. This will provide
a more accurate estimate for your remaining
filter life than the Check Filter Indicator. For full
instructions, see the extended digital manual
(QR code on page 2).
Reset the Check Filter Indicator by pressing the
black Filter Indicator Reset Button in the vent on
the side of the air purifier (see page 13).

12
EN
When Should I Replace the
Filters?
Check the VeSync app to see your remaining
filter life. If the app shows that the filter life is
less than 5%, the filters should be replaced.
For full instructions, see the extended digital
manual (QR code on page 2).
The filters should be replaced every 6–8
months. You may need to replace your filters
earlier or later depending on how often you
use your air purifier. Using your air purifier in an
environment with relatively high pollution may
mean you will need to change the filters more
often.
You may need to replace your filters if you
notice:
• Increased noise when the air purifier is on
• Decreased airflow
• Unusual odours
• Visibly clogged filters
Cleaning the Dust Sensor Lens
1. Unplug the air purifier.
2. Open the dust sensor cover. [Figure 2.1]
3. Use a cotton swab dipped in water to
clean the dust sensor lens. [Figure 2.2]
4. Wipe the lens dry with a dry cotton
swab.
Note: Do not remove the foam piece
attached to the dust sensor cover
unless instructed by Customer Support.
[Figure 2.3]
CARE & MAINTENANCE (CONT.)
Note: To maintain the performance of
your air purifier, only use ocial Levoit
filters. To buy replacement filters, go to
Amazon and search B077GQ6PW8.
Figure 2.2
Figure 2.3
Figure 2.1

13
EN
Resetting the Check Filter
Indicator
Reset the Check Filter Indicator after
changing the filters.
1. Plug in the air purifier and turn it on.
2. Locate the button vent on the side of
the air purifier. [Figure 3.1]
3. Use a paperclip, small flathead
screwdriver, or other small object to
press the black Filter Indicator Reset
Button in the vent. [Figure 3.1]
4. The Check Filter Indicator will turn o,
indicating that the reset is complete.
If not using the air purifier for an extended
period of time, wrap the filter in plastic
packaging and store in a dry place to avoid
moisture damage.
Storage
Figure 3.1
CARE & MAINTENANCE (CONT.)

14
EN
Problem Possible Solution
Air purifier will not turn on or
respond to button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop using the
air purifier and contact Customer Support (see page 17).
Securely close the filter cover so that the safety switch is
activated (see page 7).
Plug the air purifier into a dierent outlet.
Air purifier may be malfunctioning. Contact Customer Support
(see page 17).
Air Quality Indicator always
stays red.
Clean the dust sensor lens (see page 12).
Air Quality Indicator always
stays blue, even though air
quality is poor.
Air purifier makes an
unusual noise when the fan
is on.
Make sure the filters are removed from their packaging and
properly in place (see page 7).
Replace the filters (see page 11).
Air purifier may be damaged, or a foreign object may be inside.
Stop using the air purifier and contact Customer Support (see
page 17). Do not try to repair the air purifier.
Airflow is significantly
reduced.
Make sure the filters are removed from their packaging.
Press to increase the fan speed.
Leave 38 cm / 15 in of clearance on all sides of the air purifier.
Replace the filters (see page 11).
Check Filter Indicator is still
on after replacing the air
filters.
Reset the Check Filter Indicator (see page 13).
TROUBLESHOOTING

15
EN
Problem Possible Solution
Poor air purification quality. Press to increase the fan speed.
Make sure no objects are blocking the top or sides of the air
purifier (the inlet or outlet).
Make sure the filters are removed from their packaging and
properly in place (see page 7).
Close doors and windows while running the air purifier.
Make sure the room is smaller than 48 m² / 516 ft². The air purifier
may not be as eective in larger rooms.
Clean the dust sensor lens (see page 12).
Replace the filters (see page 11).
Check Filter Indicator has
not turned on within 8
months.
The Check Filter Indicator is a reminder for you to check the
filters and will light up based on how much the air purifier has
been used (see page 12). If you don’t use your air purifier
often, the indicator will take longer to turn on.
Check Filter Indicator turned
on before 6 months.
The Check Filter Indicator is a reminder for you to check the
filters and will light up based on how much the air purifier has
been used (see page 12). If you run your air purifier frequently,
the indicator will turn on sooner.
Air purifier randomly turns
o.
Air purifier is malfunctioning. Stop using the air purifier and
contact Customer Support (see page 17).
If your problem is not listed, please contact Customer Support (see page 17).
TROUBLESHOOTING (CONT.)

16
EN
VESYNC APP TROUBLESHOOTING
My air purifier isn’t connecting to the VeSync app.
• During the setup process, you must be on a secure 2.4GHz WiFi network. Confirm that the
network is working correctly.
• Make sure the WiFi password you entered is correct.
• There should be no spaces at the beginning or end of the password.
• Test the password by connecting a dierent electronic device to the router.
• If you’re manually typing in the SSID and password, double check that both are entered
correctly.
• Try moving your air purifier closer to the router. Your phone should be as close as possible
to your air purifier.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your air purifier and router are away from appliances (such as microwave ovens,
refrigerators, electronic devices, etc.) to avoid signal interference.
• If you’re using a VPN, make sure it’s turned o while setting up your air purifier.
• Disable portal authentication for your WiFi network. If portal authentication is enabled, the air
purifier will not be able to access your WiFi network, and setup will fail.
Note: Portal authentication means that you need to sign in to your WiFi network through a
web page before you can use the Internet.
For more VeSync app troubleshooting, see the extended digital manual (QR code on page 2).
Trademark Information
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its aliates.
Google and Google Play are trademarks of Google LLC.
Apple App Store is a trademark of Apple Inc.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.

17
EN
WARRANTY INFORMATION
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA
Email: [email protected]
*Please have your order invoice and order ID
ready before contacting Customer Support.
CUSTOMER SUPPORT
Terms & Policy
Arovast Corporation warrants all products
to be of the highest quality in material,
craftsmanship, and service for 2 years,
eective from the date of purchase to the end
of the warranty period. Warranty lengths may
vary between product categories.
If you have any questions or concerns about
your new product, please contact our helpful
Customer Support Team.

18
DE
Deutsche
Bedienungsanleitung
Smart True HEPA Luftreiniger
Modell: LV-PUR131S
Lieferumfang Technische Daten
1Smart-Luftreiniger
1 Hochwirksame Aktivkohlefilter
(vorinstalliert)
1 Feinvorfilter/True HEPA Kombinationsfilter
(vorinstalliert)
1 Schnellstart-Anleitung
1 Bedienungsanleitung
Stromversorgung AC 220–240 V,
50/60 Hz
Leistung 40W
Wirkungsbereich ≤48m² / 516 ft²
Betriebsbedingungen -10 bis 40°C /
14 bis 104°F
Lärmpegel 23–52 dB
Wirkungsgrad (Clean
Air Delivery Rate,
CADR)
230m³/h /
135CFM
Standby-
Stromverbrauch
< 0,8W
Abmessungen 37,1 x 18,3 x 47 cm /
14,6 x 7,2 x 18,5Zoll
Gewicht 5,21kg / 11,49lb

19
DE
SICHERHEITSHINWEISE
• Verwenden Sie diesen Luftreiniger
ausschließlich wie in diesem Handbuch
beschrieben.
• Verwenden Sie den Luftreiniger nicht im
Freien.
• Halten Sie den Luftreiniger von Wasser
und Nässe fern. Stellen Sie den
Luftreiniger keinesfalls in Wasser oder
Flüssigkeiten.
• Halten Sie Ihren Luftreiniger von
Wärmequellen fern.
• Verwenden Sie den Luftreiniger nicht
an Orten, an denen brennbare Gase,
Dämpfe, Metallstaub, Aerosol-Produkte
(Sprühdosen) oder Dämpfe von
Industrieölen vorhanden sind.
• Halten Sie den Luftreiniger 1,5m / 5Fuß
von Bereichen fern, an denen Sauersto
zugeführt wird.
• Lassen Sie Kinder in der Nähe des
Luftreinigers nicht unbeaufsichtigt.
• Führen Sie nur dann etwas in die
Önungen des Luftreinigers ein, wenn
dies im Handbuch ausdrücklich verlangt
wird.
• Setzen Sie sich nicht auf den Luftreiniger
und stellen Sie keine schweren
Gegenstände darauf ab.
Befolgen Sie sämtliche Anweisungen und Sicherheitshinweise, um das Risiko von
Brand, Stromschlägen und sonstigen Verletzungen zu reduzieren.
Allgemeine Sicherheit
• Halten Sie das Innere des Luftreinigers
trocken. Stellen Sie den Luftreiniger
nicht in Räumen mit großen
Temperaturschwankungen oder
unter einer Klimaanlage auf, um ein
Ansammeln von Feuchtigkeit zu
vermeiden.
• Ziehen Sie vor dem Durchführen von
Wartungsarbeiten (beispielsweise vor
dem Auswechseln von Luftfiltern) stets
den Stecker.
• Benutzen Sie Ihren Luftreiniger nicht,
wenn er beschädigt ist oder nicht
ordnungsgemäß funktioniert oder
wenn der Stecker oder das Kabel
beschädigt ist. Versuchen Sie nicht,
den Luftreiniger selbst zu reparieren.
Wenden Sie sich an unseren
Kundendienst (siehe Seite 34).
• WARNUNG: Um das Risiko eines
Brands oder elektrischen Schlags zu
mindern, darf der Luftreiniger nicht
mit einer Solid-State-Steuerung (wie
beispielsweise einem Dimmerschalter)
verwendet werden.
• Nicht für den gewerblichen Gebrauch.
Nur für den Haushaltsgebrauch.
LESEN SIE DIESE ANLEITUNG
BITTE SORGFÄLTIG UND
BEWAHREN SIE SIE AUF

20
DE
SICHERHEITSHINWEISE (FORTS.)
• Stellen Sie den Luftreiniger in der Nähe
der verwendeten Steckdose auf.
• Halten Sie das Kabel immer von
Wärmequellen fern.
• Bedecken Sie das Kabel nicht mit
einem Vorleger, Teppich oder sonstigem
Belag. Verlegen Sie das Kabel nicht
unter Möbeln oder Geräten.
• Verlegen Sie das Kabel nicht auf häufig
begangenen Wegen. Achten Sie darauf,
dass das Kabel keine Stolperfalle
darstellt.
Stecker und Kabel