Lexmark 2200 Series User manual

2200 Series All-In-One
Safety information
• Use only the power supply provided with this product or the
manufacturer’s authorized replacement power supply.
• Connect the power supply cord to an electrical outlet that is
near the productand easily accessible.
• Refer service or repairs, other than those described in the
user documentation, to a professional service person.
CAUTION: Do not use the fax feature during a lightning
storm. Do not set up this product or make any electrical
or cabling connections, such as the power supply cord or
telephone, during a lightning storm.
For more help:
1Refer to your User’s Guide.
2Visit our Web site.
http://support.lexmark.com/
3Call us at [phone].
Monday - Friday (9:00 AM - 9:00 PM EST)
Saturday (Noon - 6:00 PM EST)
Phone number and support times may change without notice.
2 3
5 6 74
12
3
©2003 Lexmark International, Inc. All rights reserved.
P/N 21T0070 EC 21T004
21T0070
www.lexmark.com
1Unpack your All-In-One. Connect the power supply cord. Make sure the power light is on.
Insert the cartridge(s) and snap the lid(s) closed.
Remove the sticker and tape
from the print cartridge(s).
Lift the scanner unit.
Raise the paper support and
extend the paper exit tray.
12
4
1
2
Left Right
May not be included

810
2
3
Continue, if you are using
your All-In-One with a
computer.
See “Setting up without a
computer” in the User’s
Guide if you are using
yourAll-In-Onewithouta
computer.
Load paper, and adjust the paper guide.
Close the scanner unit. 9Make sure the computer is on.
1
11 Connect the USB cable. Important!
Click Cancel on all Add New Hardware screens. Insert the CD.
13 Install the software.
1
2
When I insert the CD, nothing happens
Windows
1Eject and reinsert the printer software CD.
If the printer software installation screen does not appear, continue to the next step.
2From your desktop, double-click My Computer (In Windows XP, click Start ÆMy
Computer).
3Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.
4When the printer software installation screen appears, click Install.
5Follow the instructions on each screen to complete printer software installation.
Macintosh
1Remove the All-In-One software CD, and then restart your computer.
2Insert the All-In-One software CD.
3Double-click the Install icon.
4Follow the instructions on each screen to complete printer software installation.
14
12
14 Install the software.
Windows
12Macintosh
Continue with step 13.
Windows
Macintosh