Lexmark X950 Series User manual

FTP guide
The scanner lets you scan documents directly to an FTP server. You can scan documents to only one FTP address at a time.
Note: You can load paper sizes in a short-edge-first or long-edge-first orientation. For more information, see “Supported paper
sizes, types, and weights” section in the User's Guide.
Scanning to an FTP address using the touch screen
1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2If you are loading a document into the ADF, then adjust the paper guides.
3From the home screen, navigate to:
FTP > FTP > type the FTP address > Send It
Scanning to an FTP address using a shortcut number
1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2If you are loading a document into the ADF, then adjust the paper guides.
3Press , and then enter the FTP shortcut number.
4Touch Send It.
Scanning to an FTP address using the address book
1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2If you are loading a document into the ADF, adjust the paper guides.
3From the home screen, navigate to:
FTP > FTP > > enter the name of recipient > Browse shortcuts > name of recipient > Search
Understanding FTP options
FTP
This option lets you enter the IP address for the FTP destination.
Note: Addresses should be in dot notation form (for example: yyy.yyy.yyy.yyy).
File Name
This option lets you enter the file name of the scanned document.
FTP guide
Page 1 of 3

Original Size
This option opens a screen where you can choose the size of the documents for FTP sending.
•Touch a paper size button to select that size as the Original Size setting.The FTP screen appears with the new setting displayed.
•When “Original Size” is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes.
•When “Original Size” is set to Auto Size Sense, the scanner automatically determines the size of the original document.
Send As
This option sets the output (PDF, TIFF, JPEG or XPS) for the scanned image.
•PDF—Creates a single file with multiple pages, viewable with Adobe Reader. Adobe Reader is provided free by Adobe at
www.adobe.com.
•Secure PDF—Creates an encrypted PDF file that protects the file contents from unauthorized access
•TIFF—Creates multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu of the Embedded Web Server,
then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.
•JPEG—Creates and attaches a separate file for each page of your original document, viewable by most Web browsers and
graphics programs
•XPS—Creates a single XPS file with multiple pages, viewable using an Internet Explorer-hosted viewer and the .NET
Framework, or by downloading a third party standalone viewer
Color
This option enables or disables color for the scanned image.
Resolution
This option adjusts the output quality of your file. Increasing the image resolution increases the file size and the time needed to
scan your original document. Image resolution can be decreased to reduce the file size.
Darkness
This option adjusts how light or dark your files will turn out in relation to the original document.
Page Setup
This option lets you change the Sides (Duplex), Orientation, and Binding.
•Sides (Duplex)— Specifies if the original document is simplex (printed on one page) or duplex (printed on both sides). This
also identifies what needs to be scanned.
•Orientation— Specifies the orientation of the original document, and then changes the Sides and Binding settings to match
the orientation.
•Binding— Specifies if the original document is bound on the long-edge or short-edge side.
Content
This option lets you specify the content type and source of the original document.
Choose content type from Text, Text/Photo, Photo, or Graphics.
•Text—Use when the content of the original document is mostly text or line art.
•Graphics—Use when the original document is mostly business-type graphics such as pie charts, bar charts, and animations.
FTP guide
Page 2 of 3

•Text/Photo—Use when the original document is a mixture of text, graphics, and photos.
•Photo—Use when the original document is mostly a photo or an image.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
•Color Laser—Use when the original document was printed using a color laser printer.
•Black/White Laser—Use when the original document was printed using a mono laser printer.
•Inkjet—Use when the original document was printed using an inkjet printer.
•Photo/Film—Use when the original document is a photo from film.
•Magazine—Use when the original document is from a magazine.
•Newspaper—Use when the original document is from a newspaper.
•Press—Use when the original document was printed using a printing press.
•Other—Use when the original document was printed using an alternate or unknown printer.
Scan Preview
This option displays the first page of the original document before it is scanned completely. When the first page is scanned, the
scanning is paused and a preview image appears.
Advanced Options
Touching the Advanced Options button opens a screen where you can change the following settings:
•Advanced Imaging—Use to adjust the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Negative
Image, Mirror Image, Scan edge to edge, Shadow Detail, Sharpness, and Temperature image output settings before sending
the image.
•Edge Erase—Use to eliminate smudges or information around the edges of a document. You can choose to eliminate an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected,
leaving nothing on that portion of the scan.
•Transmission Log—Use to print the transmission log or transmission error log.
•Custom Job—Use to combine multiple scanning jobs into a single job.
FTP guide
Page 3 of 3