Lexmark C748 User manual

Menu map
Menus list
Supplies Menu Paper Menu Reports Settings
Replace Supply
Cyan Cartridge
Magenta Cartridge
Yellow Cartridge
Black Cartridge
Cyan Photoconductor
Magenta Photoconductor
Yellow Photoconductor
Black Photoconductor
Waste Toner Bottle
Fuser
Transfer Module
Default Source
Paper Size/Type
Configure MP
Substitute Size
Paper Texture
Paper Weight
Paper Loading
Custom Types
Custom Names
Universal Setup
Menu Settings Page
Device Statistics
Network Setup Page
Network [x] Setup Page
Profiles List
Print Fonts
Print Directory
Asset Report
General Settings
Flash Drive Menu
Print Settings
Security Network/Ports Help
Miscellaneous Security Settings
Confidential Print
Disk Wiping1
Security Audit Log
Set Date and Time
Active NIC
Standard Network2
Standard USB
Parallel [x]
Serial [x]
SMTP Setup
Print All Guides
Color Quality
Print Quality
Printing Guide
Media Guide
Print Defects Guide
Menu Map
Information Guide
Connection Guide
Moving Guide
Supplies Guide
1This menu appears only when a printer hard disk is installed.
2Depending on the printer setup, this menu appears as Standard Network, Wireless Network, or Network [x].
Menu map
Page 1 of 4

Using the touch‑screen printer control panel
1234
67 5
12
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQR
8
STU
9
WXYZ
0
Use the To
1Display Show the printer status.
Allow printer setup and operation.
2Home button Return to the home screen.
3Keypad Enter numbers, letter, or symbols.
4Sleep button Enable Sleep mode.
The following are the statuses based on the indicator light and the Sleep button:
•Entering or waking from Sleep mode
–The indicator light is illuminated solid green.
–The sleep button is unilluminated.
•Operating in Sleep mode
–The indicator light is illuminated solid green.
–The sleep button is illuminated solid amber.
•Entering or waking from Hibernate mode
–The indicator light is illuminated solid green.
–The sleep button is illuminated blinking amber.
•Operating in Hibernate mode
–The indicator light is unilluminated.
–The sleep button is blinking amber for 0.1 of a second, then goes completely unilluminated for 1.9
seconds in pulsing pattern.
The following actions wake the printer from Sleep mode:
•Touching the screen or pressing any hard button
•Opening Tray 1 or loading paper in the multipurpose feeder
•Opening a door or cover
•Sending a print job from the computer
•Performing a power‑on reset with the main power switch
•Attaching a device to a USB port
5Stop/Cancel
button
Stop all printer activity.
Note: A list of options is displayed when Stopped appears on the display.
Menu map
Page 2 of 4

Use the To
6Indicator light Check the status of the printer.
•Off—The printer is off.
•Blinking green—The printer is warming up, processing data, or printing.
•Solid green—The printer is on, but idle.
•Blinking red—The printer requires operator intervention.
7USB port Connect a flash drive to the printer.
Understanding the home screen
When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen buttons
and icons to initiate an action.
Note: Your home screen, icons, and the buttons may vary depending on your home screen customization settings,
administrative setup, and active embedded solutions.
2 3
5678
4
123.123.123.123
1
Touch To
1Change Language Change the primary language of the printer.
2Bookmarks Create, organize, and save a set of bookmarks (URLs) into a tree view of folders and file links.
Note: The tree view does not include bookmarks created within Forms and Favorites, and the ones
in the tree are not usable in Forms and Favorites.
3Held Jobs Display all current held jobs.
4USB or USB
Thumbdrive
View, select, or print photos and documents from a flash drive.
Note: This icon appears only when you return to the home screen while a memory card or flash
drive is connected to the printer.
5Menus Access printer menus.
Note: These menus are available only when the printer is in the Ready state.
6Status message bar •Show the current printer status such as Ready or Busy.
•Show printer conditions such as Fuser missing or Cartridge Low.
•Show intervention messages and the instructions on how to clear them.
Menu map
Page 3 of 4

Touch To
7Status/Supplies •Display a warning or error message whenever the printer requires intervention to continue
processing.
•Access the messages screen for more information on the message, and how to clear it.
8Tips View a context‑sensitive help information.
This may also appear on the home screen:
Touch To
Search Held Jobs Search current held jobs.
Features
Feature Description
Attendance message alert If an attendance message affects a function, then this icon appears and the red indicator
light blinks.
Warning If an error condition occurs, then this icon appears.
Printer IP address
Example: 123.123.123.123
The IP address of your network printer is located at the top left corner of the home screen
and appears as four sets of numbers separated by periods. You can use the IP address when
accessing the Embedded Web Server so you can view and remotely configure printer
settings even when you are not physically near the printer.
Menu map
Page 4 of 4