Lexmark C925 User manual

Moving guide
Selecting a location for the printer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained
personnel to lift it safely.
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options,
leave enough room for them too. It is important to:
•Set up the printer near a wall outlet.
•Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156
standard.
•Provide a flat, sturdy, and stable surface.
•Keep the printer:
–Away from the direct airflow of air conditioners, heaters, or ventilators
–Free from direct sunlight, humidity extremes, or temperature fluctuations
–Clean, dry, and free of dust
•Allow the following recommended amount of space around the printer for proper ventilation:
1
2
3
4
5
1385 mm (15.16 in.)
2609.6 mm (24.0 in.)
3100 mm (3.94 in.)
4100 mm (3.94 in.)
5100 mm (3.94 in.)
Moving the printer to another location
The printer and options can be safely moved to another location by following these precautions:
•Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to
move the options must have a surface able to support the dimensions of the options.
•Keep the printer in an upright position.
•Avoid severe jarring movements.
Moving guide
Page 1 of 2

Shipping the printer
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.
Moving guide
Page 2 of 2