Lexmark E320 User manual

Lexmark
E320
User Guide
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
1
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
1

Turning the printer on and offTurning the printer on and off
1-The power button is located on the left side of the printer.
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
2
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
2

Using the operator panel
1-The operator panel has 6 lights and 1 operator panel
button.
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
3

PrintingPrinting
1- Load paper with the top of the page pointing down, facing you in the tray as
shown.
1- Load paper with the top of the page pointing down, facing you in the tray as
shown.
2- From your software application, open the file you want to print.
3- Click File to open the file menu.
4- Click Print to open the printer menu.
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
4
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
4

5- If necessary, click the pull down menu and select the Lexmark E320 Printer.5- If necessary, click the pull down menu and select the Lexmark E320 Printer.
5- Verify the correct printer is selected in the dialog box.
6- Click OK to print your document.
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
5
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
5

Canceling a print job
From the printer operator panel
1- If the job you want to cancel is printing and the Ready/Data light is blinking,
Press the reset button for approximately 3 seconds
This will reset the printer and cancel the job.
From a Windows computer
1- Click Start →Settings →Printers
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
6

3- A list of available printers appears. Double-click the printer icon you are using to print
the job.
3- A list of available printers appears. Double-click the printer icon you are using to print
the job.
4- A list of print jobs appear. Click the job you want to cancel. Press the delete key.4- A list of print jobs appear. Click the job you want to cancel. Press the delete key.
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
7
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
7

Clearing paper jamsClearing paper jams
In Hawaii, due to the high humidity, paper can absorb moisture from the air. Moist paper
can stick to each other causing paper jams. To avoid paper jams be sure to use fresh, dry
paper.
In Hawaii, due to the high humidity, paper can absorb moisture from the air. Moist paper
can stick to each other causing paper jams. To avoid paper jams be sure to use fresh, dry
paper.
If print media jams in the printer, the Paper Jam light prompts you to clear the paper path.If print media jams in the printer, the Paper Jam light prompts you to clear the paper path.
1- If media has just started to feed from the tray when the jam occurs: 1- If media has just started to feed from the tray when the jam occurs:
Solution-
A -Pull the media out of the printer by pulling straight up
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
8
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
8

B -Press the operator panel buttonB -Press the operator panel button
to resume printing. to resume printing.
2- If the jam occurs inside the printer:2- If the jam occurs inside the printer:
A- Grasp the finger tabs on both sides of the printer cover and pull toward you.A- Grasp the finger tabs on both sides of the printer cover and pull toward you.
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
9
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
9

B- Grasp the cartridge handle and pull the print cartridge straight up and then
towards you.
B- Grasp the cartridge handle and pull the print cartridge straight up and then
towards you.
CAUTION: Handle the printer cartridge carefully and avoid touching it.
IT MAY BE HOT!
C- Set the printer cartridge down carefully.
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
10
D- Carefully remove the paper.
E- Reinstall the print cartridge and close the cover.
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
10

2- If the media is jammed tightly behind the roller, or if you just can’t
get a grip on it.
2- If the media is jammed tightly behind the roller, or if you just can’t
get a grip on it.
A- Open the front output door by pulling on the center tab
B- Pull out the paper.
Compiled by: Brent Runnells, EPSCoR-ITER \\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
11
\\ . . .\sdal\How-To\ht_lexmark_e320.doc
Last modified 7/13/04
11